Merichel Plaza

Screening for Bioactive Compounds from Algae

In the present work, a comprehensive methodology to carry out the screening for novel natural functional compounds is presented. To do that, a new strategy has been developed including the use of unexplored natural sources (i.e., algae and microalgae) together with environmentally clean extraction techniques and advanced analytical tools. The developed procedure allows also estimating the functional activities of the different extracts obtained and even more important, to correlate these activities with their particular chemical composition. By applying this methodology it has been possible to carry out the screening for bioactive compounds in the algae Himanthalia elongata and the microalgae Synechocystis sp. Both algae produced active extracts in terms of both antioxidant and antimicrobial activity. The obtained pressurized liquid extracts were chemically characterized by GC-MS and HPLC-DAD. Different fatty acids and volatile compounds with antimicrobial activity were identified, such as phytol, fucosterol, neophytadiene or palmitic, palmitoleic and oleic acids. Based on the results obtained, ethanol was selected as the most appropriate solvent to extract this kind of compounds from the natural sources studied.

Innovative natural functional ingredients from microalgae.

Nowadays, a wide variety of compounds such as polyphenols, polyunsaturated fatty acids (PUFA), or phytosterols obtained, for example, from wine, fish byproducts, or plants are employed to prepare new functional foods. However, unexplored natural sources of bioactive ingredients are gaining much attention since they can lead to the discovery of new compounds or bioactivities. Microalgae have been proposed as an interesting, almost unlimited, natural source in the search for novel natural functional ingredients, and several works have shown the possibility to find bioactive compounds in these organisms. Some advantages can be associated with the study of microalgae such as their huge diversity, the possibility of being used as natural reactors at controlled conditions, and their ability to produce active secondary metabolites to defend themselves from adverse or extreme conditions. In this contribution, an exhaustive revision is presented involving the research for innovative functional food ingredients from microalgae. The most interesting results in this promising field are discussed including new species composition and bioactivity and new processing and extraction methods. Moreover, the future research trends are critically commented.

Green processes for the extraction of bioactives from Rosemary: chemical and functional characterization via ultra-performance liquid chromatography-tandem mass spectrometry and in-vitro assays.

In this contribution, the performance of three different extraction procedures towards the extraction of antioxidants from rosemary (Rosmarinus officinalis) is presented. Namely, pressurized liquid extraction (PLE), using water and ethanol as solvents, supercritical fluid extraction (SFE), using neat CO(2) and supercritical CO(2) modified with ethanol, as well as a novel extraction process called Water Extraction and Particle formation On-line (WEPO) are directly compared. Different extraction conditions including temperatures, times and pressures have been studied. The produced extracts have been characterized in terms of extraction yield, antioxidant activity (using the DPPH radical scavenging method) and total phenols (using the Folin method). Besides, all the extracts have been chemically characterized using a new quantitative UPLC-MS/MS method. This method allowed the determination of the main antioxidants present in rosemary, including, among others, rosmarinic acid, carnosic acid and carnosol, attaining detection limits as low as 2ng/mL. The results obtained in this study show that PLE using ethanol at high temperatures (200 degrees C) was able to produce extracts with high antioxidant activity (EC(50) 8.8microg/mL) and high yield (ca. 40%) while efficiently extracting antioxidants of diverse polarity, among them, carnosic and rosmarinic acids, regarded as the most important antioxidants present in rosemary. Nevertheless, in this work, the ability of the three studied environmentally friendly extraction techniques to obtain bioactives from natural sources is demonstrated.

New possibilities for the valorization of olive oil by-products

In this contribution, the capabilities of pressurized liquid extraction (PLE) using food-grade solvents, such as water and ethanol, to obtain antioxidant extracts rich on polyphenolic compounds from olive leaves are studied. Different extraction conditions were tested, and the PLE obtained extracts were characterized in vitro according to their antioxidant capacity (using the DPPH radical scavenging and the TEAC assays) and total phenols amounts. The most active extracts were obtained with hot pressurized water at 200 °C (EC(50) 18.6 μg/mL) and liquid ethanol at 150 °C (EC(50) 27.4 μg/mL), attaining at these conditions high extraction yields, around 40 and 30%, respectively. The particular phenolic composition of the obtained extracts was characterized by LC-ESI-MS. Using this method, 25 different phenolic compounds could be tentatively identified, including phenolic acids, secoiridoids, hydroxycinnamic acid derivatives, flavonols and flavones. Among them, hydroxytyrosol, oleuropein and luteolin-glucoside were the main phenolic antioxidants and were quantified on the extracts together with other minor constituents, by means of a UPLC-MS/MS method. Results showed that using water as extracting agent, the amount of phenolic compounds increased with the extraction temperature, being hydroxytyrosol the main phenolic component on the water PLE olive leaves extracts, reaching up to 8.542 mg/g dried extract. On the other hand, oleuropein was the main component on the extracts obtained with ethanol (6.156-2.819 mg/g extract). Results described in this work demonstrate the good possibilities of using PLE as a useful technique for the valorization of by-products from the olive oil industry, such as olive leaves.

Hyphenated technique for the extraction and determination of isoflavones in algae: Ultrasound-assisted supercritical fluid extraction followed by fast chromatography with tandem mass spectrometry

New hyphenated technique for the extraction and determination of isoflavones in sea and freshwater algae and cyanobacteria was developed. The method consists of sonication sample pretreatment, extraction by supercritical CO(2) modified by 3% (v/v) of MeOH/H(2)O mixture (9:1, v/v) at 35 MPa and 40°C for 60 min, fast chromatography analysis by the means of Agilent 1200 Series Rapid Resolution and MS/MS determination. Agilent 1200 Series RRLC was used with Zorbax SB-CN chromatographic column (100 mm × 2.1mm, particle size 3.5 μm), 3μl injection volume, mobile phase consisting of 0.2% (v/v) acetic acid in water (solvent A) and acetonitrile (solvent B) and used with linear gradient (30% B at 0 min, from 0 min to 3 min up to 50% B, from 3 to 6 min up to 80% B and from 6 to 10 min down to 30% B). The flow-rate was 0.4 mL/min, column oven temperature 35°C. MS detector Agilent Technologies 6460 Triple quadrupole LC/MS with Agilent Jet Stream was used in a negative ESI mode under following conditions: gas temperature 350°C, gas flow 13 L/min, nebulizer gas pressure 50 psi, sheath gas temperature 400°C, sheath gas flow 12L/min, capillary voltage was 4 kV. Samples were analysed in the multiple reaction monitoring (MRM) mode. Eight isoflavone compounds were found for the first time in seven real samples of sea algae and in three control samples of freshwater algae and cyanobacteria. Usual optimisation study of extraction parameters was performed. Pressure and temperature optima for algae matrix are different from those obtained sooner for other matrices for most of the analytes, but the results of modifier optimisation study are in good accordance with those obtained sooner for spiked samples and red clover matrix. It seems that matrix has very small or no effect on the modifier selection. Two different approaches of sonication pretreatment were tested: sonication bath and the thorn instrument. In longer extraction time experiments, thorn sonication was more efficient and recovery of following supercritical fluid extraction was higher.

Chemical composition of bioactive pressurized extracts of Romanian aromatic plants

In this contribution, pressurized liquid extraction (PLE) has been employed to isolate bioactive compounds from three native Romanian plants, oregano (Origanum vulgare), tarragon (Artemisia dracunculus) and wild thyme (Thymus serpyllum). Different PLE conditions have been tested including extraction with water, ethanol and their mixtures in a wide range of extraction temperatures (50-200°C), and the antioxidant capacity of the extracts was measured using different assays (DPPH radical scavenging, TEAC assay and Folin-Ciocalteau assay to measure total phenols). Moreover, a complete chemical characterization by using LC-MS/MS was carried out to be able to correlate the bioactivity with the particular chemical composition of each extract and plant. The use of PLE with water as a solvent at the highest temperature tested (200°C) always provided the highest extraction yields for the three studied plants, being maximum for oregano (>60%). Besides, oreganos pressurized water extracts at lower temperatures (50°C) presented the highest content on total phenols (184.9 mg gallic acid/g extract) and the best antioxidant activities (EC(50) 6.98 μg/ml). In general, oregano extracts were the most active, followed by wild thyme extracts. The antioxidant capacity measured by DPPH assay was highly correlated with the amount of total phenols. Moreover, the use of a LC-MS/MS method allowed the identification of 30 different phenolic compounds in the different extracts, including phenolic acids, flavones, flavanones and flavonols, which have an important influence on the total antioxidant capacity of the different extracts.

Substituent Effects on in Vitro Antioxidizing Properties, Stability, and Solubility in Flavonoids

Antioxidants are widely used by humans, both as dietary supplements and as additives to different types of products. The desired properties of an antioxidant often include a balance between the antioxidizing capacity, stability, and solubility. This review focuses on flavonoids, which are naturally occurring antioxidants, and different common substituent groups on flavonoids and how these affect the properties of the molecules in vitro. Hydroxyl groups on flavonoids are both important for the antioxidizing capacity and key points for further modification resulting in O-methylation, -glycosylation, -sulfation, or -acylation. The effects of O-glycosylation and acylation are discussed as these types of substitutions have been most explored in vitro concerning antioxidizing properties as well as stability and solubility. Possibilities to control the properties by enzymatic acylation and glycosylation are also reviewed, showing that depending on the choice of enzyme and substrate, regioselective results can be obtained, introducing possibilities for more targeted production of antioxidants with predesigned properties.

Extraction and Neoformation of Antioxidant Compounds by Pressurized Hot Water Extraction from Apple Byproducts

There is a great interest in searching for new environmentally sustainable techniques to enhance the use of agricultural byproducts. In this work, a response surface methodology was used to study the influence of the two independent variables, temperature (25-200 °C) and extraction time (3-17 min), in the extraction of antioxidants by pressurized hot water extraction (PHWE) from industrial apple byproducts. The optimized extraction method for determination of flavonols was at 120 °C and 3 min, giving a predicted total yield of flavonols of 1.3 μmol/g dry apple byproduct. Results obtained suggest that new antioxidant compounds were formed at the higher extraction temperatures. A desirability function response surface, considering maximum antioxidant capacity and minimal formation of brown color, was calculated and gave an optimum of 125 °C and 3 min. This latter PHWE method correlates well with the obtained results for flavonols; thus, a desirability function is a simpler alternative method for finding optimal conditions.

Metabolomic assessment with CE-MS of the nutraceutical effect of Cystoseira spp extracts in an animal model

There is a need of scientific evidence of claimed nutraceutical effects, but also there is a social movement towards the use of natural products and among them algae are seen as rich resources. Within this scenario, the development of methodology for rapid and reliable assessment of markers of efficiency and security of these extracts is necessary. The rat treated with streptozotocin has been proposed as the most appropriate model of systemic oxidative stress for studying antioxidant therapies. Cystoseira is a brown alga containing fucoxanthin and other carothenes whose pressure‐assisted extracts were assayed to discover a possible beneficial effect on complications related to diabetes evolution in an acute but short‐term model. Urine was selected as the sample and CE‐TOF‐MS as the analytical technique to obtain the fingerprints in a non‐target metabolomic approach. Multivariate data analysis revealed a good clustering of the groups and permitted the putative assignment of compounds statistically significant in the classification. Interestingly a group of compounds associated to lysine glycation and cleavage from proteins was found to be increased in diabetic animals receiving vehicle as compared to control animals receiving vehicle (N6,N6,N6‐trimethyl‐L‐lysine, N‐methylnicotinamide, galactosylhydroxylysine, L‐carnitine, N6‐acetyl‐N6‐hydroxylysine, fructose‐lysine, pipecolic acid, urocanic acid, amino‐isobutanoate, formylisoglutamine. Fructoselysine significantly decreased after the treatment changing from a 24% increase to a 19% decrease. CE‐MS fingerprinting of urine has provided a group of compounds different to those detected with other techniques and therefore proves the necessity of a cross‐platform analysis to obtain a broad view of biological samples.

Quantification of Individual Phenolic Compounds'Contribution to Antioxidant Capacity in Apple: A Novel Analytical Tool Based on Liquid Chromatography with Diode Array, Electrochemical, and Charged Aerosol Detection

Phenolics, particularly from apples, hold great interest because of their antioxidant properties. In the present study, the total antioxidant capacity of different apple extracts obtained by pressurized hot water extraction (PHWE) was determined by cyclic voltammetry (CV), which was compared with the conventional antioxidant assays. To measure the antioxidant capacity of individual antioxidants present in apple extracts, a novel method was developed based on high-performance liquid chromatography (HPLC) with photodiode array (DAD), electrochemical (ECD), and charged aerosol (CAD) detection. HPLC-DAD-ECD-CAD enabled rapid, qualitative, and quantitative determination of antioxidants in the apple extracts. The main advantage of using CAD was that this detector enabled quantification of a large number of phenolics using only a few standards. The results showed that phenolic acids and flavonols were mainly responsible for the total antioxidant capacity of apple extracts. In addition, protocatechuic acid, chlorogenic acid, hyperoside, an unidentified phenolic acid, and a quercetin derivative presented the highest antioxidant capacities.