Mi Yan

Simultaneous suppression of PCDD/F and NOx during municipal solid waste incineration

Thiourea was tested as a dioxins inhibitor in a full-scale municipal solid waste incinerator with high capacity (34 t h(-1)). The suppressant, featuring a high S- and N-content, was converted into liquor and then injected (35 kg h(-1)) into the furnace (850 °C) through the inlets already used for Selective Non-Catalytic Reduction (SNCR) of flue gas NOx. The first results show that thiourea reduces the dioxins in flue gas by 55.8 wt.%, those in fly ash by 90.3 wt.% and the total dioxins emission factor by 91.0 wt.%. The concentration of PCDD/Fs was 0.08 ng TEQ Nm(-3), below the national standard of 0.1 ng TEQ Nm(-3). The weight average chlorination degree of dioxins decreases slightly after adding the inhibitor, indicating that it suppresses both the formation and the chlorination of dioxins. Analysis of fly ash by scanning electron microscope (SEM) suggests that the particle size becomes larger after adding the inhibitor. Further analysis using an energy dispersive spectrometer (EDS) reveals that the sulphur content in fly ash rises, but the chlorine content declines when adding thiourea. These results suggest that poisoning the metal catalyst and blocking the chlorination are probably responsible for suppression. NOx reduction attains 42.6 wt.%. These tests are paving the way for further industrial application and assist in controlling the future emissions of dioxins and NOx from MSWI.

Formation of dioxins on NiO and NiCl2 at different oxygen concentrations

Model fly ash (MFA) containing activated carbon (AC) as source of carbon, NaCl as source of chlorine and either NiO or NiCl2 as de novo catalyst, was heated for 1h at 350 °C in a carrier gas flow composed of N2 containing 0, 6, 10, and 21 vol.% O2, to study the formation of PCDD/Fs (dioxins) and its dependence on oxygen. The formation of PCDD/Fs with NiCl2 was stronger by about two orders of magnitude than with NiO and the difference augmented with rising oxygen concentration. The thermodynamics of the NiO-NiCl2 system were represented, X-ray absorption near edge structural (XANES) spectroscopy allowed to probe the state of oxidation of the nickel catalyst in the MFA and individual metal species were distinguished using the LCF (Linear combination fitting) technique: thus three supplemental nickel compounds (Ni2O3, Ni(OH)2, and Ni) were found in the fly ash. Principal Component Analysis (PCA) indicates that both Ni2O3 and NiCl2 probably played an important role in the formation of PCDD/Fs.

Dioxins from medical waste incineration: Normal operation and transient conditions:

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are key pollutants in waste incineration. At present, incinerator managers and official supervisors focus only on emissions evolving during steady-state operation. Yet, these emissions may considerably be raised during periods of poor combustion, plant shutdown, and especially when starting-up from cold. Until now there were no data on transient emissions from medical (or hospital) waste incineration (MWI). However, MWI is reputed to engender higher emissions than those from municipal solid waste incineration (MSWI). The emission levels in this study recorded for shutdown and start-up, however, were significantly higher: 483 ± 184 ng Nm-3 (1.47 ± 0.17 ng I-TEQ Nm-3) for shutdown and 735 ng Nm-3 (7.73 ng I-TEQ Nm-3) for start-up conditions, respectively. Thus, the average (I-TEQ) concentration during shutdown is 2.6 (3.8) times higher than the average concentration during normal operation, and the average (I-TEQ) concentration during start-up is 4.0 (almost 20) times higher. So monitoring should cover the entire incineration cycle, including start-up, operation and shutdown, rather than optimised operation only. This suggestion is important for medical waste incinerators, as these facilities frequently start up and shut down, because of their small size, or of lacking waste supply. Forthcoming operation should shift towards much longer operating cycles, i.e., a single weekly start-up and shutdown.

Suppression of dioxins in waste incinerator emissions by recirculating SO2.

Sulphur is an effective inhibitor of the formation of Polychlorinated dibenzo-p-dioxins and polychlorinated dibenzo-furans (PCDD/Fs), as was proven in laboratory and pilot plant studies. In this study, a pilot-scale system with capacity 300 N m(3) h(-1) was situated at the bypass of an actual hazardous waste incinerator (HWI) and tested to reduce the emission of PCDD/Fs. Activated carbon was used as a medium to adsorb SO2 from flue gas and release it again at the higher temperature of filtered ash detoxification to achieve SO2 circulation in the system. Most PCDD/Fs in the filtered ash are decomposed by thermal treatment. Experimental results indicate that the system is capable of stable operation with SO2 accumulation at a high level of concentration and a high reduction efficiency of PCDD/Fs. A reduction of more than 80% was already achieved without addition of other sulphur compounds. When pyrite (FeS2) was added the reduction of PCDD/Fs could reach 94%, with a residual PCDD/Fs concentration in the flue gas as low as 0.13 ng TEQ N m(-3). This SO2 recirculating and suppression technology potentially provides significant progress for dioxin emission control in waste incineration and could be useful for controlling emissions of PCDD/Fs and other chlorinated organic chemicals in China.