Michael Adam Bartlett

Performance and Cost Analysis of Advanced Gas Turbine Cycles With Pre-Combustion CO2 Capture

This paper presents the results of an evaluation of advanced combined cycle gas turbine plants with pre-combustion capture of CO2 from natural gas. In particular, the designs are carried out with the objectives of high efficiency, low capital cost and low emissions of carbon dioxide to the atmosphere. The novel cycles introduced in this paper are comprised of a high-pressure syngas generation island, in which an air-blown POX reformer is used to generate syngas from natural gas, and a power island, in which a CO2 -lean syngas is burnt in a large frame machine. In order to reduce the efficiency penalty of natural gas reforming, a significant effort is spent evaluating and optimizing alternatives to recover the heat released during the process. CO2 is removed from the shifted syngas using either CO2 absorbing solvents or a CO2 membrane. CO2 separation membranes, in particular, have the potential for considerable cost or energy savings compared to conventional solvent-based separation and benefit from the high pressure level of the syngas generation island. A feasibility analysis and a cycle performance evaluation are carried out for large frame gas turbines such as the 9FB. Both short term and long term solutions have been investigated. An analysis of the cost of CO2 avoided is presented, including an evaluation of the cost of modifying the combined cycle due to CO2 separation. The paper describes a power plant reaching the performance targets of 50% net cycle efficiency and 80% CO2 capture, as well as the cost target of 30

Performance and Cost Analysis of a Novel Gas Turbine Cycle With CO2 Capture

per ton of CO2 avoided. This paper indicates a development path to this power plant that minimizes technical risks by incremental implementation of new technology.Copyright

Systems and methods for power generation with carbon dioxide isolation

In this paper, a new gas turbine cycle with integrated post-combustion CO2 capture is presented. The concept advantageously uses an intercooled gas turbine in combination with exhaust gas recirculation to enable CO2 separation at elevated concentration and pressure. Therefore, less energy is required for the CO2 separation process. In addition, due to the reduced volume flow entering the CO2 separation unit, the costs of the CO2 separation equipment are significantly reduced. The performance and cost of CO2 avoided of the power cycle have been analyzed. The results show that the concept is able to reach high CO2 capture rates of 80% and above. When accounting for CO2 capture and compression, nearly 50% (LHV) combined cycle net efficiency is obtained based on an existing medium scale intercooled gas turbine. Furthermore, the cycle has an even higher efficiency potential if applied to larger intercooled gas turbine combined cycles in the future. Using CO2 separation membrane technology which is currently under development, the cost of CO2 avoided is estimated at 31

Carbon dioxide capture systems and methods

/tCO2 based on a medium scale intercooled gas turbine. A future scaled-up configuration based on a large-frame intercooled gas turbine has the potential to meet 30

RANKINE CYCLE SYSTEM

/tCO2 cost of CO2 avoided.Copyright