Michael Becidan

Life-cycle assessment of a Waste-to-Energy plant in central Norway: Current situation and effects of changes in waste fraction composition.

Waste-to-Energy (WtE) plants constitute one of the most common waste management options to deal with municipal solid waste. WtE plants have the dual objective to reduce the amount of waste sent to landfills and simultaneously to produce useful energy (heat and/or power). Energy from WtE is gaining steadily increasing importance in the energy mix of several countries. Norway is no exception, as energy recovered from waste currently represents the main energy source of the Norwegian district heating system. Life-cycle assessments (LCA) of WtE systems in a Norwegian context are quasi-nonexistent, and this study assesses the environmental performance of a WtE plant located in central Norway by combining detailed LCA methodology with primary data from plant operations. Mass transfer coefficients and leaching coefficients are used to trace emissions over the various life-cycle stages from waste logistics to final disposal of the ashes. We consider different fractions of input waste (current waste mix, insertion of 10% car fluff, 5% clinical waste and 10% and 50% wood waste), and find a total contribution to Climate Change Impact Potential ranging from 265 to 637gCO2eq/kg of waste and 25 to 61gCO2eq/MJ of heat. The key drivers of the environmental performances of the WtE system being assessed are the carbon biogenic fraction and the lower heating value of the incoming waste, the direct emissions at the WtE plant, the leaching of the heavy metals at the landfill sites and to a lesser extent the use of consumables. We benchmark the environmental performances of our WtE systems against those of fossil energy systems, and we find better performance for the majority of environmental impact categories, including Climate Change Impact Potential, although some trade-offs exist (e.g. higher impacts on Human Toxicity Potential than natural gas, but lower than coal). Also, the insertion of challenging new waste fractions is demonstrated to be an option both to cope with the excess capacity of the Norwegian WtE sector and to reach Norways ambitious political goals for environmentally friendly energy systems.

The effect of kaolin on the combustion of demolition wood under well-controlled conditions.

In an attempt to look at means for reduction of corrosion in boilers, combustion experiments are performed on demolition wood with kaolin as additive. The experiments were performed in a multi-fuel reactor with continuous feed of pellets and by applying staged air combustion. A total characterization of the elemental composition of the fuel, the bottom ash and some particle size stages of fly ash was performed. This was done in order to follow the fate of some of the problematic compounds in demolition wood as a function of kaolin addition and other combustion-related parameters. In particular chlorine and potassium distribution between the gas phase, the bottom ash and the fly ash is reported as a function of increased kaolin addition, reactor temperature and air staging. Kaolin addition of 5 and 10% were found to give the least aerosol load in the fly ash. In addition, the chlorine concentration in aerosol particles was at its lowest levels for the same addition of kaolin, although the difference between 5 and 10% addition was minimal. The reactor temperature was found to have a minimal effect on both the fly ash and bottom ash properties.

Combustion Properties of Norwegian Biomass: Wood Chips and Forest Residues

Flue gas emissions and particle size distribution were investigated during combustion experiments of wood, forest residue and mixtures of these two. The combustion experiments were carried out in a grate fired multi-fuel reactor with and without air staging at stable operation conditions and constant temperature of 850 °C. The overall excess air ratio was held at 1.6, and the primary excess air ratio was 0.8 during air staged experiments. NOx emissions are reduced by air staging. Fly ash particle concentration of forest residues in the flue gas is lower than wood. Aerosols number increased in the staged experiments for fuel blends.

Cooling aerosols and changes in albedo counteract warming from CO2 and black carbon from forest bioenergy in Norway

Climate impacts of forest bioenergy result from a multitude of warming and cooling effects and vary by location and technology. While past bioenergy studies have analysed a limited number of climate-altering pollutants and activities, no studies have jointly addressed supply chain greenhouse gas emissions, biogenic CO2 fluxes, aerosols and albedo changes at high spatial and process detail. Here, we present a national-level climate impact analysis of stationary bioenergy systems in Norway based on wood-burning stoves and wood biomass-based district heating. We find that cooling aerosols and albedo offset 60–70% of total warming, leaving a net warming of 340 or 69 kg CO2e MWh−1 for stoves or district heating, respectively. Large variations are observed over locations for albedo, and over technology alternatives for aerosols. By demonstrating both notable magnitudes and complexities of different climate warming and cooling effects of forest bioenergy in Norway, our study emphasizes the need to consider multiple forcing agents in climate impact analysis of forest bioenergy.

Pelletizing and Combustion Behaviors of Wood Waste with Additives Mixing

Pelletizing and combustion behaviors of wood waste with and without additive addition were investigated in this study. It was found that the wood waste pellets have a high potential for slag formation during combustion and can cause operational problems. With additives addition, no significant changes were observed regarding mechanical properties of the wood waste pellets. Sewage sludge addition was found to have positive effects on NOx and CO emissions during combustion. Both sewage sludge and marble sludge addition have evident influence on slag formation during combustion. Sewage sludge addition reduced the formed slag amount and sizes, and therefore improved the boiler operation. Marble sludge eliminated the slag formation during the wood waste pellets combustion.