Michael D. Biegalski

Probing oxygen vacancy concentration and homogeneity in solid-oxide fuel-cell cathode materials on the subunit-cell level

Oxygen vacancy distributions and dynamics directly control the operation of solid-oxide fuel cells and are intrinsically coupled with magnetic, electronic and transport properties of oxides. For understanding the atomistic mechanisms involved during operation of the cell it is highly desirable to know the distribution of vacancies on the unit-cell scale. Here, we develop an approach for direct mapping of oxygen vacancy concentrations based on local lattice parameter measurements by scanning transmission electron microscopy. The concept of chemical expansivity is demonstrated to be applicable on the subunit-cell level: local stoichiometry variations produce local lattice expansion that can be quantified. This approach was successfully applied to lanthanum strontium cobaltite thin films epitaxially grown on substrates of different symmetry, where polarized neutron reflectometry revealed a strong difference in magnetic properties. The different vacancy content found in the two films suggests the change in oxygen chemical potential as a source of distinct magnetic properties, opening pathways for structural tuning of the vacancy concentrations and their gradients.

Orientation-Dependent Oxygen Evolution Activities of Rutile IrO2 and RuO2.

The activities of the oxygen evolution reaction (OER) on IrO2 and RuO2 catalysts are among the highest known to date. However, the intrinsic OER activities of surfaces with defined crystallographic orientations are not well-established experimentally. Here we report that the (100) surface of IrO2 and RuO2 is more active in alkaline environments (pH 13) than the most thermodynamically stable (110) surface. The OER activity was correlated with the density of coordinatively undersaturated metal sites of each crystallographic facet. The surface-orientation-dependent activities can guide the design of nanoscale catalysts with increased activity for electrolyzers, metal-air batteries, and photoelectrochemical water splitting applications.

Reversible redox reactions in an epitaxially stabilized SrCoO x oxygen sponge

Fast, reversible redox reactions in solids at low temperatures without thermomechanical degradation are a promising strategy for enhancing the overall performance and lifetime of many energy materials and devices. However, the robust nature of the cations oxidation state and the high thermodynamic barrier have hindered the realization of fast catalysis and bulk diffusion at low temperatures. Here, we report a significant lowering of the redox temperature by epitaxial stabilization of strontium cobaltites (SrCoO(x)) grown directly as one of two distinct crystalline phases, either the perovskite SrCoO(3-δ) or the brownmillerite SrCoO(2.5). Importantly, these two phases can be reversibly switched at a remarkably reduced temperature (200-300 °C) in a considerably short time (< 1 min) without destroying the parent framework. The fast, low-temperature redox activity in SrCoO(3-δ) is attributed to a small Gibbs free-energy difference between two topotatic phases. Our findings thus provide useful information for developing highly sensitive electrochemical sensors and low-temperature cathode materials.

Surface strontium enrichment on highly active perovskites for oxygen electrocatalysis in solid oxide fuel cells

Perovskite oxides have high catalytic activities for oxygen electrocatalysis competitive to platinum at elevated temperatures. However, little is known about the oxide surface chemistry that influences the activity near ambient oxygen partial pressures, which hampers the design of highly active catalysts for many clean-energy technologies such as solid oxide fuel cells. Using in situsynchrotron-based, ambient pressure X-ray photoelectron spectroscopy to study the surface chemistry changes, we show that the coverage of surface secondary phases on a (001)-oriented La0.8Sr0.2CoO3−δ (LSC) film becomes smaller than that on an LSC powder pellet at elevated temperatures. In addition, strontium (Sr) in the perovskite structure enriches towards the film surface in contrast to the pellet having no detectable changes with increasing temperature. We propose that the ability to reduce surface secondary phases and develop Sr-enriched perovskite surfaces of the LSC film contributes to its enhanced activity for O2 electrocatalysis relative to LSC powder-based electrodes.

Effect of epitaxial strain on ferroelectric polarization in multiferroic BiFeO3 films

Multiferroic BiFeO3 epitaxial films with thicknesses ranging from 40to960nm were grown by pulsed laser deposition on SrTiO3 (001) substrates with SrRuO3 bottom electrodes. X-ray characterization shows that the structure evolves from angularly distorted tetragonal with c∕a≈1.04 to more bulklike distorted rhombohedral (c∕a≈1.01) as the strain relaxes with increasing thickness. Despite this significant structural evolution, the ferroelectric polarization along the body diagonal of the distorted pseudocubic unit cells, as calculated from measurements along the normal direction, barely changes.

Exploiting dimensionality and defect mitigation to create tunable microwave dielectrics

The miniaturization and integration of frequency-agile microwave circuits—relevant to electronically tunable filters, antennas, resonators and phase shifters—with microelectronics offers tantalizing device possibilities, yet requires thin films whose dielectric constant at gigahertz frequencies can be tuned by applying a quasi-static electric field. Appropriate systems such as BaxSr1−xTiO3 have a paraelectric–ferroelectric transition just below ambient temperature, providing high tunability. Unfortunately, such films suffer significant losses arising from defects. Recognizing that progress is stymied by dielectric loss, we start with a system with exceptionally low loss—Srn+1TinO3n+1 phases—in which (SrO)2 crystallographic shear planes provide an alternative to the formation of point defects for accommodating non-stoichiometry. Here we report the experimental realization of a highly tunable ground state arising from the emergence of a local ferroelectric instability in biaxially strained Srn+1TinO3n+1 phases with n ≥ 3 at frequencies up to 125 GHz. In contrast to traditional methods of modifying ferroelectrics—doping or strain—in this unique system an increase in the separation between the (SrO)2 planes, which can be achieved by changing n, bolsters the local ferroelectric instability. This new control parameter, n, can be exploited to achieve a figure of merit at room temperature that rivals all known tunable microwave dielectrics.

Catalytic Activity Enhancement for Oxygen Reduction on Epitaxial Perovskite Thin Films for Solid‐Oxide Fuel Cells

The active ingredient: La{sub 0.8}Sr{sub 0.2}CoO{sub 3-{delta}} (LSC) epitaxial thin films are prepared on (001)-oriented yttria-stabilized zirconia (YSZ) single crystals with a gadolinium-doped ceria (GDC) buffer layer. The LSC epitaxial films exhibit better oxygen reduction kinetics than bulk LSC. The enhanced activity is attributed in part to higher oxygen nonstoichiometry.

Enhanced oxygen reduction activity on surface-decorated perovskite thin films for solid oxide fuel cells

Surface-decoration of perovskites can strongly affect the oxygen reduction activity, and therefore is a new and promising approach to improve SOFC cathode materials. In this study, we demonstrate that a small amount of secondary phase on a (001) La0.8Sr0.2CoO3−δ (LSC) surface can either significantly activate or passivate the electrode. LSC (001) microelectrodes prepared by pulsed laser deposition on a (001)-oriented yttria-stabilized zirconia (YSZ) substrate were decorated with La-, Co-, and Sr-(hydr)oxides/carbonates. “Sr”-decoration with nanoparticle coverage in the range from 50% to 80% of the LSC surface enhanced the surface exchange coefficient, kq, by an order of magnitude while “La”-decoration and “Co”-decoration led to no change and reduction in kq, respectively. Although the physical origin for the enhancement is not fully understood, results from atomic force microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy suggest that the observed kq enhancement for “Sr”-decorated surfaces can be attributed largely to catalytically active interface regions between surface Sr-enriched particles and the LSC surface.

Interplay of Octahedral Tilts and Polar Order in BiFeO3 Films

Heterointerface stabilization of a distinct nonpolar BiFeO3 phase occurs simultaneously with changes in octahedral tilts. The resulting phase arises via suppression of polarization by a structural order parameter and can thus be identified as anti-ferroelectric (Fe displacements - bottom panel). The phase is metastable and can be switched into a polar ferroelectric state (top panel) under an applied electric bias.

Oxygen electrocatalysis on (001)-oriented manganese perovskite films: Mn valency and charge transfer at the nanoscale

We report that the oxygen reduction reaction (ORR) activities of (001)-oriented manganese perovskite films decrease from 10 to 1 nm by more than an order of magnitude, which can be attributed to the barrier associated with interfacial band bending that impedes electron transfer to the electrolyte, and reduction of Mn3+ due to charge transfer from the Nb:SrTiO3 substrate. Furthermore, we show by substitution in La1−x(Ca,Sr)xMnO3 that Mn3+, not Mn4+, is the active valence state for ORR.