Michael J. Ridout

Interfacial Characterization of β-Lactoglobulin Networks : Displacement by Bile Salts

The competitive displacement of a model protein (beta-lactoglobulin) by bile salts from air-water and oil-water interfaces is investigated in vitro under model duodenal digestion conditions. The aim is to understand this process so that interfaces can be designed to control lipid digestion thus improving the nutritional impact of foods. Duodenal digestion has been simulated using a simplified biological system and the protein displacement process monitored by interfacial measurements and atomic force microscopy (AFM). First, the properties of beta-lactoglobulin adsorbed layers at the air-water and the olive oil-water interfaces were analyzed by interfacial tension techniques under physiological conditions (pH 7, 0.15 M NaCl, 10 mM CaCl2, 37 degrees C). The protein film had a lower dilatational modulus (hence formed a weaker network) at the olive oil-water interface compared to the air-water interface. Addition of bile salt (BS) severely decreased the dilatational modulus of the adsorbed beta-lactoglobulin film at both the air-water and olive oil-water interfaces. The data suggest that the bile salts penetrate into, weaken, and break up the interfacial beta-lactoglobulin networks. AFM images of the displacement of spread beta-lactoglobulin at the air-water and the olive oil-water interfaces suggest that displacement occurs via an orogenic mechanism and that the bile salts can almost completely displace the intact protein network under duodenal conditions. Although the bile salts are ionic, the ionic strength is sufficiently high to screen the charge allowing surfactant domain nucleation and growth to occur resulting in displacement. The morphology of the protein networks during displacement is different from those found when conventional surfactants were used, suggesting that the molecular structure of the surfactant is important for the displacement process. The studies also suggest that the nature of the oil phase is important in controlling protein unfolding and interaction at the interface. This in turn affects the strength of the protein network and the ability to resist displacement by surfactants.

Modulating pancreatic lipase activity with galactolipids: effects of emulsion interfacial composition

It is widely known that the interfacial quality of lipid emulsion droplets influences the rate and extent of lipolysis. The aim of this work was to investigate the effect of two galactolipids, monogalactosyldiacylglycerol (MGDG) and digalactosyldiacylglycerol (DGDG), adsorbed at the interface on in vitro digestibility of olive oil by porcine pancreatic lipase. The experiments were performed under simulated duodenal conditions in the presence of phosphatidylcholine (lecithin) and bile salts. It was found that emulsions prepared with DGDG had a longer lag phase prior to lipase activation with a decrease in lipolysis rate. In contrast, no inhibitory effect on lipase kinetics was observed in emulsions prepared with MGDG. We postulated that the larger headgroup and more tightly packed molecular organization of DGDG at the interface gave rise to steric hindrance that retarded colipase and lipase adsorption onto the substrate surfaces and hence delayed and reduced lipolysis. It was noted that the lag phase and lipolysis rate strongly depended on the DGDG/lecithin molar ratio in the systems: the higher the molar ratio, the longer the lag phase followed by a reduced lipolysis rate. The ability of DGDG to inhibit bile salt adsorption/displacement was also investigated. The results showed that bile salts did not completely displace DGDG from the interface, explaining the reason why DGDG still possessed inhibitory activity even in the presence of bile salts at a physiological relevant concentration. The results provide interesting insights into the influence of the galactolipid headgroup and lecithin on the emulsion interfacial quality which in turn regulates the lipolysis. The findings potentially could lead to the production of generic foods and drugs designed for regulating dietary fat absorption in the prevention and treatment of obesity and related disorders.

Using AFM to image the internal structure of starch granules

Atomic force microscopy (AFM) has been used to observe the ultra-structure of starch granules for starches from different botanical sources (maize and potato). Starch granules were embedded, sectioned and imaged in dc constant force topographic, error signal and force modulation modes. AFM images of the starches embedded in Nanoplast®, a resin previously used for AFM and electron microscopy studies, failed to reveal the growth ring structure within the granules consistently. Furthermore, ultra-structural features could not unequivocally be attributed to the ‘blocklet’ structure of the granule because of the underlying granular texture of the resin itself. In contrast the use of rapid setting Araldite, a non-penetrating resin, allowed the ultra-structure of the granules to be viewed without the necessity of pre-treatment (lintnerisation or enzymatic degradation) steps. The images demonstrated clearly the importance of the choice of embedding material, and showed that under the correct conditions ‘growth rings’ and blocklet structures can be observed in ‘near native’ granules.

Xanthan-locust bean gum interactions and gelation

Abstract The gelation of xanthan-locust bean gum (LBG) mixtures has been investigated. It has been observed that, over the ionic strength range chosen, the melting temperatures of the gels ( T g ) remains constant, whereas the order-disorder transition temperature ( T m ) for xanthan alone increases with increasing ionic strength. The preparation temperature ( T p ) of the mixed gels is known to affect gelation. Studies have been made on the effect of T p relative to T g and T m on gelation. It has been observed that gelation occurs at all T p , even when T p T m . At a given ionic strength, increasing T p leads to an increase in the measured storage modulus ( G ′) which closely follows the degree of disordering of the xanthan molecules. Similarly, for a fixed T p , increasing the ionic strength stabilises the ordered xanthan conformation and is found to reduce the measured storage modulus ( G ′). These results are discussed in the light of the current models for mixed-biopolymer gelation.

Analysis of structure and function of gellans with different substitution patterns

Abstract Chemical mutagenesis or exposure to antibiotic stress of Sphingomonas paucimobilis ATCC 31461 and R40 have been used to isolate mutants producing modified gellan gum polysaccharides. N.m.r. and conventional carbohydrate analysis methods have been used to characterise these polysaccharides. The 1 H and 13 C n.m.r. spectra of gellan gum have been fully assigned and the anomeric regions have been shown to be very sensitive to the type and location of non-carbohydrate substituents. Analysis of the gellan gum mutants suggests that they differ in the nature of acetate and glycerate substitution. Such gellan-related polysaccharides have been used to test the selective effect of acyl substituents on the gelation of gellan gum.

Adsorption of bile salts and pancreatic colipase and lipase onto digalactosyldiacylglycerol and dipalmitoylphosphatidylcholine monolayers.

It is increasingly recognized that changes in the composition of the oil-water interface can markedly affect pancreatic lipase adsorption and function. To understand interfacial mechanisms determining lipase activity, we investigated the adsorption behavior of bile salts and pancreatic colipase and lipase onto digalactosyldiacylglycerol (DGDG) and dipalmitoylphosphatidylcholine (DPPC) monolayers at the air-water interface. The results from Langmuir trough and pendant drop experiments showed that a DGDG interface was more resistant to the adsorption of bile salts, colipase, and lipase compared to that of DPPC. Atomic force microscopy (AFM) images showed that the adsorption of bile salts into a DPPC monolayer decreased the size of the liquid condensed (LC) domains while there was no visible topographical change for DGDG systems. The results also showed that colipase and lipase adsorbed exclusively onto the mixed DPPC-bile salt regions and not the DPPC condensed phase. When the colipase and lipase were in excess, they fully covered the mixed DPPC-bile salt regions. However, the colipase and lipase coverage on the mixed DGDG-bile salt monolayer was incomplete and discontinuous. It was postulated that bile salts adsorbed into the DPPC monolayers filling the gaps between the lipid headgroups and spacing out the lipid molecules, making the lipid hydrocarbon tails more exposed to the surface. This created hydrophobic patches suitable for the binding of colipase and lipase. In contrast, bile salts adsorbed less easily into the DGDG monolayer because DGDG has a larger headgroup, which has strong intermolecular interactions and the ability to adopt different orientations at the interface. Thus, there are fewer hydrophobic patches that are of sufficient size to accommodate the colipase on the mixed DGDG-bile salt monolayer compared to the mixed DPPC-bile salt regions. The results from this work have reinforced the hypothesis that the interfacial molecular packing of lipids at the oil-water interface influences the adsorption of bile salts, colipase, and lipase, which in turn impacts the rate of lipolysis.

Gelation of gelatin observation in the bulk and at the air-water interface

Gelation of gelatin under various conditions has been followed by atomic force microscopy (AFM) with the objective of understanding more fully the structure formed during the gelation process. AFM images were obtained of the structures formed from both the bulk sol and in surface films during the onset of gelation. While gelation occurred in the bulk sol, the extent of helix formation was monitored by measurements of optical rotation, and the molecular aggregation was imaged by AFM. Interfacial gelatin films formed at the air-water interface were also studied. Measurements of surface tension and surface rheology were made periodically and Langmuir-Blodgett films were drawn from the interface to allow AFM imaging of the structure of the interfacial layer as a function of time. Structural studies reveal that at low levels of helical content the gelatin molecules assemble into aggregates containing short segments of dimensions comparable to those expected for gelatin triple helices. With time larger fibrous structures appear whose dimensions suggest that they are bundles of triple helices. As gelation proceeds, the number density of fibers increases at the expense of the smaller aggregates, eventually assembling into a fibrous network. The gel structure appears to be sensitive to the thermal history, and this is particularly important in determining the structure and properties of the interfacial films.

Atomic force microscopy of pea starch granules: granule architecture of wild-type parent, r and rb single mutants, and the rrb double mutant

AFM studies have been made of the internal structure of pea starch granules. The data obtained provides support for the blocklet model of starch granule structure (Carbohydr. Polym. 32 (1997) 177-191). The granules consist of hard blocklets dispersed in a softer matrix material. High-resolution images have yielded new insights into the detailed structure of growth rings within the granules. The blocklet structure is continuous throughout the granule and the growth rings originate from localised defects in blocklet production distributed around the surface of spheroidal shells within the granules. A mutation at the rb locus did not lead to significant changes in granule architecture. However, a mutation at the r locus led to loss of growth rings and changed blocklet structure. For this mutant the blocklets were distributed within a harder matrix material. This novel composite arrangement was used to explain why the granules had internal fissures and also changes in gelatinisation behaviour. It is suggested that the matrix material is the amylose component of the granule and that both amylose and amylopectin are present within the r mutant starch granules in a partially-crystalline form. Intermediate changes in granule architecture have been observed for the double mutant rrb.

The effect of physiological conditions on the surface structure of proteins: Setting the scene for human digestion of emulsions

Understanding and manipulating the interfacial mechanisms that control human digestion of food emulsions is a crucial step towards improved control of dietary intake. This article reports initial studies on the effects of the physiological conditions within the stomach on the properties of the film formed by the milk protein (

The effect of peptide-pectin interactions on the gelation behaviour of a plant cell wall pectin

\beta