Michael Krayer

Expanded Scope of Synthetic Bacteriochlorins via Improved Acid Catalysis Conditions and Diverse Dihydrodipyrrin-Acetals

Bacteriochlorins are attractive candidates for a wide variety of photochemical studies owing to their strong absorption in the near-infrared spectral region. The prior acid-catalysis conditions [BF(3) x O(Et)(2) in CH(3)CN at room temperature] for self-condensation of a dihydrodipyrrin-acetal (bearing a geminal dimethyl group in the pyrroline ring) typically afforded a mixture of three macrocycles: the expected 5-methoxybacteriochlorin (MeOBC-type), a 5-unsubstituted bacteriochlorin (HBC-type), and a free base B,D-tetradehydrocorrin (TDC-type). Here, a broad survey of >20 acids identified four promising acid catalysis conditions of which TMSOTf/2,6-di-tert-butylpyridine in CH(2)Cl(2) at room temperature was most attractive owing to formation of the 5-methoxybacteriochlorin as the sole macrocycle regardless of the pyrrolic substituents in the dihydrodipyrrin-acetal (electron-withdrawing, electron-donating, or no substituent). Eleven new dihydrodipyrrin-acetals were prepared following standard routes. Application of the new acid catalysis conditions has afforded diverse bacteriochlorins (e.g., bearing alkyl/ester, aryl/ester, diester, and no substituents) in a few days from commercially available starting materials. Consideration of the synthetic steps and yields for formation of the dihydrodipyrrin-acetal and bacteriochlorin underpins evaluation of synthetic plans for early installation of bacteriochlorin substituents via the dihydrodipyrrin-acetal versus late installation via derivatization of beta-bromobacteriochlorins. Treatment of the 5-methoxybacteriochlorins with NBS gave regioselective 15-bromination when no pyrrolic substituents were present or when each pyrrole contained two substituents; on the other hand, the presence of a beta-ethoxycarbonyl group caused loss of regioselectivity. The 15 new bacteriochlorins prepared herein exhibit a long-wavelength absorption band in the range 707-759 nm, providing tunable access to the near-infrared region. Taken together, this study expands the scope of available bacteriochlorins for fundamental studies and diverse applications.

Stable Synthetic Cationic Bacteriochlorins as Selective Antimicrobial Photosensitizers

ABSTRACT Photodynamic inactivation is a rapidly developing antimicrobial treatment that employs a nontoxic photoactivatable dye or photosensitizer in combination with harmless visible light to generate reactive oxygen species that are toxic to cells. Tetrapyrroles (e.g., porphyrins, chlorins, bacteriochlorins) are a class of photosensitizers that exhibit promising characteristics to serve as broad-spectrum antimicrobials. In order to bind to and efficiently penetrate into all classes of microbial cells, tetrapyrroles should have structures that contain (i) one or more cationic charge(s) or (ii) a basic group. In this report, we investigate the use of new stable synthetic bacteriochlorins that have a strong absorption band in the range 720 to 740 nm, which is in the near-infrared spectral region. Four bacteriochlorins with 2, 4, or 6 quaternized ammonium groups or 2 basic amine groups were compared for light-mediated killing against a Gram-positive bacterium (Staphylococcus aureus), a Gram-negative bacterium (Escherichia coli), and a dimorphic fungal yeast (Candida albicans). Selectivity was assessed by determining phototoxicity against human HeLa cancer cells under the same conditions. All four compounds were highly active (6 logs of killing at 1 μM or less) against S. aureus and showed selectivity for bacteria over human cells. Increasing the cationic charge increased activity against E. coli. Only the compound with basic groups was highly active against C. albicans. Supporting photochemical and theoretical characterization studies indicate that (i) the four bacteriochlorins have comparable photophysical features in homogeneous solution and (ii) the anticipated redox characteristics do not correlate with cell-killing ability. These results support the interpretation that the disparate biological activities observed stem from cellular binding and localization effects rather than intrinsic electronic properties. These findings further establish cationic bacteriochlorins as extremely active and selective near-infrared activated antimicrobial photosensitizers, and the results provide fundamental information on structure-activity relationships for antimicrobial photosensitizers.

Photophysical Properties and Electronic Structure of Stable, Tunable Synthetic Bacteriochlorins: Extending the Features of Native Photosynthetic Pigments

Bacteriochlorins, which are tetrapyrrole macrocycles with two reduced pyrrole rings, are Natures near-infrared (NIR) absorbers (700-900 nm). The strong absorption in the NIR region renders bacteriochlorins excellent candidates for a variety of applications including solar light harvesting, flow cytometry, molecular imaging, and photodynamic therapy. Natural bacteriochlorins are inherently unstable due to oxidative conversion to the chlorin (one reduced pyrrole ring) or the porphyrin. The natural pigments are also only modestly amenable to synthetic manipulation, owing to a nearly full complement of substituents on the macrocycle. Recently, a new synthetic methodology has afforded access to stable synthetic bacteriochlorins wherein a wide variety of substituents can be appended to the macrocycle at preselected locations. Herein, the spectroscopic and photophysical properties of 33 synthetic bacteriochlorins are investigated. The NIR absorption bands of the chromophores range from ∼700 to ∼820 nm; the lifetimes of the lowest excited singlet state range from ∼2 to ∼6 ns; the fluorescence quantum yields range from ∼0.05 to ∼0.25; and the yield of the lowest triplet excited state is ∼0.5. The spectroscopic/photophysical studies of the bacteriochlorins are accompanied by density functional theory (DFT) calculations that probe the characteristics of the frontier molecular orbitals. The DFT calculations indicate that the impact of substituents on the spectral properties of the molecules derives primarily from effects on the lowest unoccupied molecular orbital. Collectively, the studies show how the palette of synthetic bacteriochlorins extends the properties of the native photosynthetic pigments (bacteriochlorophylls). The studies have also elucidated design principles for tuning the spectral and photophysical characteristics as required for a wide variety of photochemical applications.

Stable synthetic bacteriochlorins overcome the resistance of melanoma to photodynamic therapy

Cutaneous malignant melanoma remains a therapeutic challenge, and patients with advanced disease have limited survival. Photodynamic therapy (PDT) has been successfully used to treat many malignancies, and it may show promise as an antimelanoma modality. However, high melanin levels in melanomas can adversely affect PDT effectiveness. Herein the extent of melanin contribution to melanoma resistance to PDT was investigated in a set of melanoma cell lines that markedly differ in the levels of pigmentation;3 new bacteriochlorins successfully overcame the resistance. Cell killing studies determined that bacteriochlorins are superior at (LD50≈0.1 µM) when compared with controls such as the FDA‐approved Photofrin (LD50≈10 µM) and clinically tested LuTex (LD50≈=1 µM). The melanin content affects PDT effectiveness, but the degree of reduction is significantly lower for bacteriochlorins than for Photofrin. Microscopy reveals that the least effective bacteriochlorin localizes predominantly in lysosomes, while the most effective one preferentially accumulates in mitochondria. Interestingly all bacteriochlorins accumulate in melanosomes, and subsequent illumination leads to melanosomal damage shown by electron microscopy. Fluorescent probes show that the most effective bacteriochlorin produces significantly higher levels of hydroxyl radicals, and this is consistent with the redox properties suggested by molecular‐orbital calculations. The best in vitro performing bacteriochlorin was tested in vivo in a mouse melanoma model using spectrally resolved fluorescence imaging and provided significant survival advantage with 20% of cures (P<0.01).—Mroz, P., Huang, Y.‐Y., Szokalska, A., Zhiyentayev, T., Janjua, S., Nifli, A.‐P., Sherwood, M. E., Ruzié, C., Borbas, K. E., Fan, D., Krayer, M., Balasubramanian, T., Yang, E., Kee, H. L., Kirmaier, C., Diers, J. R., Bocian, D. F., Holten, D., Lindsey, J. S., Hamblin, M. R. Stable synthetic bacteriochlorins overcome the resistance of melanoma to photodynamic therapy. FASEB J. 24, 3160–3170 (2010). www.fasebj.org

In Vitro Photodynamic Therapy and Quantitative Structure–Activity Relationship Studies with Stable Synthetic Near-Infrared-Absorbing Bacteriochlorin Photosensitizers

Photodynamic therapy (PDT) is a rapidly developing approach to treating cancer that combines harmless visible and near-infrared light with a nontoxic photoactivatable dye, which upon encounter with molecular oxygen generates the reactive oxygen species that are toxic to cancer cells. Bacteriochlorins are tetrapyrrole compounds with two reduced pyrrole rings in the macrocycle. These molecules are characterized by strong absorption features from 700 to >800 nm, which enable deep penetration into tissue. This report describes testing of 12 new stable synthetic bacteriochlorins for PDT activity. The 12 compounds possess a variety of peripheral substituents and are very potent in killing cancer cells in vitro after illumination. Quantitative structure-activity relationships were derived, and subcellular localization was determined. The most active compounds have both low dark toxicity and high phototoxicity. This combination together with near-infrared absorption gives these bacteriochlorins great potential as photosensitizers for treatment of cancer.

Biohybrid Photosynthetic Antenna Complexes for Enhanced Light-Harvesting

Biohybrid antenna systems have been constructed that contain synthetic chromophores attached to 31mer analogues of the bacterial photosynthetic core light-harvesting (LH1) β-polypeptide. The peptides are engineered with a Cys site for bioconjugation with maleimide-terminated chromophores, which include synthetic bacteriochlorins (BC1, BC2) with strong near-infrared absorption and commercial dyes Oregon green (OGR) and rhodamine red (RR) with strong absorption in the blue-green to yellow-orange regions. The peptides place the Cys 14 (or 6) residues before a native His site that binds bacteriochlorophyll a (BChl-a) and, like the native LH proteins, have high helical content as probed by single-reflection IR spectroscopy. The His residue associates with BChl-a as in the native LH1 β-polypeptide to form dimeric ββ-subunit complexes [31mer(-14Cys)X/BChl](2), where X is one of the synthetic chromophores. The native-like BChl-a dimer has Q(y) absorption at 820 nm and serves as the acceptor for energy from light absorbed by the appended synthetic chromophore. The energy-transfer characteristics of biohybrid complexes have been characterized by steady-state and time-resolved fluorescence and absorption measurements. The quantum yields of energy transfer from a synthetic chromophore located 14 residues from the BChl-coordinating His site are as follows: OGR (0.30) < RR (0.60) < BC2 (0.90). Oligomeric assemblies of the subunit complexes [31mer(-14Cys)X/BChl](n) are accompanied by a bathochromic shift of the Q(y) absorption of the BChl-a oligomer as far as the 850-nm position found in cyclic native photosynthetic LH2 complexes. Room-temperature stabilized oligomeric biohybrids have energy-transfer quantum yields comparable to those of the dimeric subunit complexes as follows: OGR (0.20) < RR (0.80) < BC1 (0.90). Thus, the new biohybrid antennas retain the energy-transfer and self-assembly characteristics of the native antenna complexes, offer enhanced coverage of the solar spectrum, and illustrate a versatile paradigm for the construction of artificial LH systems.

Tailoring a Bacteriochlorin Building Block with Cationic, Amphipathic, or Lipophilic Substituents

Bacteriochlorins are attractive candidates for photodynamic therapy (PDT) of diverse medical indications owing to their strong absorption in the near-infrared (NIR) region, but their use has been stymied by lack of access to stable, synthetically malleable molecules. To overcome these limitations, a synthetic free base 3,13-dibromobacteriochlorin (BC-Br(3)Br(13)) has been exploited as a building block in the synthesis of diverse bacteriochlorins via Pd-mediated coupling reactions (Sonogashira, Suzuki, and reductive carbonylation). Each bacteriochlorin is stable to adventitious dehydrogenation by virtue of the presence of a geminal dimethyl group in each pyrroline ring. The target bacteriochlorins bear cationic, lipophilic, or amphipathic substituents at the 3- and 13- (beta-pyrrolic) positions. A dicarboxybacteriochlorin was converted to amide derivatives via the intermediate diacid chloride. A diformylbacteriochlorin was subjected to reductive amination to give aminomethyl derivatives. A set of 3,5-disubstituted aryl groups bearing lipophilic or amphipathic groups was introduced via Suzuki coupling. Altogether 22 free base bacteriochlorins have been prepared. Eight aminoalkylbacteriochlorins were quaternized with methyl iodide at two or four amine sites per molecule, which resulted in water solubility. Each bacteriochlorin exhibits a Q(y) absorption band in the range of 720-772 nm. The ability to introduce a wide variety of peripheral functional groups makes these bacteriochlorins attractive candidates for diverse applications in photomedicine including PDT in the NIR region.

Extending the short and long wavelength limits of bacteriochlorin near-infrared absorption via dioxo- and bisimide-functionalization.

Six new bacteriochlorins expanding the range of the strong near-infrared (NIR) absorption (Qy band) to both shorter and longer wavelengths (∼690 to ∼900 nm) have been synthesized and characterized. The architectures include bacteriochlorin-bisimides that have six-membered imide rings spanning the 3,5- and 13,15-macrocycle positions or five-membered imide rings spanning the β-pyrrolic 2,3- and 12,13-positions. Both bisimide types absorb at significantly longer wavelength than the bacteriochlorin precursors (no fused rings), whereas oxo-groups at the 7- or 7,17-positions shift the Qy band to a new short wavelength limit. Surprisingly, bacteriochlorin-bisimides with five-membered β-pyrrolic-centered imide rings have a Qy band closer to that of six-membered bacteriochlorin-monoimides. However, the five-membered bisimides (versus the six-membered bacteriochlorin-monoimides) have significantly enhanced absorption intensity that is paralleled by an ∼2-fold higher fluorescence yield (∼0.16 vs ∼0.07) and longer singlet excited-state lifetime (∼4 ns vs ∼2 ns). The photophysical enhancements derive in part from mixing of the lowest unoccupied frontier molecular orbitals of the five-membered imide ring with those of the bacteriochlorin framework. In general, all of the new bacteriochlorins have excited-state lifetimes (1-4 ns) that are sufficiently long for use in molecular-based systems for photochemical applications.

De Novo Synthesis of Long-Wavelength Absorbing Chlorin-13,15-dicarboximides

Chlorins bearing a six-membered imide ring spanning positions 13-15, commonly referred to as purpurinimides, exhibit long-wavelength absorption yet have heretofore only been available via semisynthesis from naturally occurring chlorophylls. A concise route to synthetic chlorins, which bear a geminal dimethyl group in the pyrroline ring, has been extended to provide access to chlorin-13,15-dicarboximides. The new route entails (i) synthesis of a 13-bromochlorin, (ii) palladium-catalyzed carbamoylation at the 13-position, (iii) regioselective 15-bromination under acidic conditions, and (iv) one-flask palladium-mediated carbonylation and ring closure to form the imide. In some cases the ring closure reaction afforded the isomeric (and readily separable) chlorin-isoimide in addition to the chlorin-imide. The resulting chlorin-imides and chlorin-isoimides exhibit long-wavelength absorption (679-715 nm) and emission (683-720 nm) in the far-red and near-infrared spectral region. The absorption of the chlorin-(iso)imides fills the spectral window between that of analogous synthetic chlorins and 13(1)-oxophorbines (603-687 nm) and bacteriochlorins (707-792 nm). The synthetic versatility of the de novo route complements the existing semisynthetic route from chlorophylls and should enable fundamental spectroscopic studies and photochemical applications.

De novo synthesis and photophysical characterization of annulated bacteriochlorins. Mimicking and extending the properties of bacteriochlorophylls

Bacteriochlorophylls contain the bacteriochlorin chromophore and a fifth, five-membered oxopentano ring that encompasses positions 13–15 known as the “isocyclic” ring E. Such bacterio-131-oxophorbines have heretofore only been available in the naturally occurring compounds, and analogues bearing six-membered rings have only been available by derivatization of bacteriochlorophylls. A de novo route to synthetic bacteriochlorins, which bear a geminal dimethyl group in each pyrroline ring, has been extended to gain access to a bacterio-131-oxophorbine and bacteriochlorin-13,15-dicarboximides. The route relies on acid-catalyzed condensation of a dihydrodipyrrin-acetal to form the bacteriochlorin, which then is subjected to regioselective 15-bromination. Pd-mediated cyclization of the 15-bromobacteriochlorin bearing a 13-acetyl group (intramolecular α-arylation) or 13-ethoxycarbonyl group (carbamoylation and intramolecular imidation) gives the bacterio-131-oxophorbine or bacteriochlorin-13,15-dicarboximide, respectively. The resulting macrocycles exhibit absorption in the near-infrared spectral region (733–818 nm), which extends the spectral coverage beyond that obtained previously with synthetic bacteriochlorins that lack a fifth ring. The macrocycles also exhibit excited singlet-state lifetimes (1.9–4.6 ns) comparable to or longer than those of natural photosynthetic pigments. Density functional theory calculations predict that the bathochromically shifted absorption is primarily due to lowering of the energy of the lowest unoccupied molecular orbital. The new route complements existing semisynthetic routes and should enable fundamental spectroscopic studies and diverse photochemical applications.