Michael Vaughn

Self-assembled photosystem-I biophotovoltaics on nanostructured TiO 2 and ZnO

The abundant pigment-protein membrane complex photosystem-I (PS-I) is at the heart of the Earth’s energy cycle. It is the central molecule in the “Z-scheme” of photosynthesis, converting sunlight into the chemical energy of life. Commandeering this intricately organized photosynthetic nanocircuitry and re-wiring it to produce electricity carries the promise of inexpensive and environmentally friendly solar power. We here report that dry PS-I stabilized by surfactant peptides functioned as both the light-harvester and charge separator in solar cells self-assembled on nanostructured semiconductors. Contrary to previous attempts at biophotovoltaics requiring elaborate surface chemistries, thin film deposition, and illumination concentrated into narrow wavelength ranges the devices described here are straightforward and inexpensive to fabricate and perform well under standard sunlight yielding open circuit photovoltage of 0.5 V, fill factor of 71%, electrical power density of 81 µW/cm2 and photocurrent density of 362 µA/cm2, over four orders of magnitude higher than any photosystem-based biophotovoltaic to date.

Self-organized photosynthetic nanoparticle for cell-free hydrogen production.

There is considerable interest in making use of solar energy through photosynthesis to create alternative forms of fuel. Here, we show that photosystem I from a thermophilic bacterium and cytochrome-c(6) can, in combination with a platinum catalyst, generate a stable supply of hydrogen in vitro upon illumination. The self-organized platinization of the photosystem I nanoparticles allows electron transport from sodium ascorbate to photosystem I via cytochrome-c(6) and finally to the platinum catalyst, where hydrogen gas is formed. Our system produces hydrogen at temperatures up to 55 degrees C and is temporally stable for >85 days with no decrease in hydrogen yield when tested intermittently. The maximum yield is approximately 5.5 micromol H(2) h(-1) mg(-1) chlorophyll and is estimated to be approximately 25-fold greater than current biomass-to-fuel strategies. Future work will further improve this yield by increasing the kinetics of electron transfer, extending the spectral response and replacing the platinum catalyst with a renewable hydrogenase.

Self-Assembling Peptide Detergents Stabilize Isolated Photosystem Ion a Dry Surface for an Extended Time

We used a class of designed peptide detergents to stabilize photosystem I (PS-I) upon extended drying under N2 on a gold-coated-Ni-NTA glass surface. PS-I is a chlorophyll-containing membrane protein complex that is the primary reducer of ferredoxin and the electron acceptor of plastocyanin. We isolated the complex from the thylakoids of spinach chloroplasts using a chemical detergent. The chlorophyll molecules associated with the PS-I complex provide an intrinsic steady-state emission spectrum between 650 and 800 nm at −196.15 °C that reflects the organization of the pigment-protein interactions. In the absence of detergents, a large blue shift of the fluorescence maxima from approximately 735 nm to approximately 685 nm indicates a disruption in light-harvesting subunit organization, thus revealing chlorophyll−protein interactions. The commonly used membrane protein-stabilizing detergents, N-dodecyl-β-D-maltoside and N-octyl-β-D-glucoside, only partially stabilized the approximately 735-nm complex with approximately 685-nm spectroscopic shift. However, prior to drying, addition of the peptide detergent acetyl- AAAAAAK at increasing concentration significantly stabilized the PS-I complex. Moreover, in the presence of acetyl- AAAAAAK, the PS-I complex is stable in a dried form at room temperature for at least 3 wk. Another peptide detergent, acetyl-VVVVVVD, also stabilized the complex but to a lesser extent. These observations suggest that the peptide detergents may effectively stabilize membrane proteins in the solid-state. These designed peptide detergents may facilitate the study of diverse types of membrane proteins.

Designer Peptide Surfactants Stabilize Functional Photosystem-I Membrane Complex in Aqueous Solution for Extended Time ⊥

Detailed structural analyses of membrane proteins as well as their uses in advanced nanobiotechnological applications require extended stabilization of the functional protein conformation. Here we report that a new class of designer surfactant like peptides can significantly increase the activity and stabilize the functional form of the multidomain protein complex Photosystem-I (PS-I) in solution better than other commonly used chemical detergents. We carried out a systematic analysis using a series of such peptides to identify the chemical and structural features that enhance the photochemical activity of PS-I. We observed that peptide surfactant amphiphilicity is necessary but not sufficient to stabilize PS-I in its functional form. A number of factors are essential for designing the optimal peptide including amino acid sequence, N-terminal acetylation and C-terminal amidation. Furthermore, we showed that the polarity and number of charges on the hydrophilic head are important as well as hydrophobicity and size of the amino acid side groups in the hydrophobic tail play an important role. The best performing peptides for the stabilization of functional PS-I are, in order of effectiveness, ac-I(6)K(2)-CONH(2), ac-A(6)K-CONH(2), ac-V(6)K(2)-CONH(2), and ac-V(6)R(2)-CONH(2). These simple and inexpensive peptide surfactants will likely make significant contributions to stabilize the functional form of diverse and currently elusive membrane proteins and their complexes with important applications.

In Vitro Comparative Kinetic Analysis of the Chloroplast Toc GTPases

A unique aspect of protein transport into plastids is the coordinate involvement of two GTPases in the translocon of the outer chloroplast membrane (Toc). There are two subfamilies in Arabidopsis, the small GTPases (Toc33 and Toc34) and the large acidic GTPases (Toc90, Toc120, Toc132, and Toc159). In chloroplasts, Toc34 and Toc159 are implicated in precursor binding, yet mechanistic details are poorly understood. How the GTPase cycle is modulated by precursor binding is complex and in need of careful dissection. To this end, we have developed novel in vitro assays to quantitate nucleotide binding and hydrolysis of the Toc GTPases. Here we present the first systematic kinetic characterization of four Toc GTPases (cytosolic domains of atToc33, atToc34, psToc34, and the GTPase domain of atToc159) to permit their direct comparison. We report the KM, Vmax, and Ea values for GTP hydrolysis and the Kd value for nucleotide binding for each protein. We demonstrate that GTP hydrolysis by psToc34 is stimulated by chloroplast transit peptides; however, this activity is not stimulated by homodimerization and is abolished by the R133A mutation. Furthermore, we show peptide stimulation of hydrolytic rates are not because of accelerated nucleotide exchange, indicating that transit peptides function as GTPase-activating proteins and not guanine nucleotide exchange factors in modulating the activity of psToc34. Finally, by using the psToc34 structure, we have developed molecular models for atToc33, atToc34, and atToc159G. By combining these models with the measured enzymatic properties of the Toc GTPases, we provide new insights of how the chloroplast protein import cycle may be regulated.

Controlling the Morphology of Photosystem I Assembly on Thiol-Activated Au Substrates

Morphological variations of Photosystem I (PS I) assembly on hydroxyl-terminated alkanethiolate self-assembled monolayer (SAM)/Au substrates with various deposition techniques is presented. Our studies indicate that deposition conditions such as PS I concentration and driving force play a central role in determining organization of immobilized PS I on thiol-activated Au surfaces. Specifically, atomic force microscopy (AFM) and ellipsometry analyses indicate that gravity-driven deposition from concentrated PS I solutions results in a large number of columnar PS I aggregates, which assemble perpendicular to the Au surface. PS I deposition yields much more uniform layers when deposited at lower concentrations, suggesting preassembly of the aggregate formation in the solution phase. Moreover, in electric field assisted deposition at high field strengths, columnar self-assembly is largely prevented, thereby allowing a uniform, monolayer-like deposition even at very high PS I concentrations. In situ dynamic light scattering (DLS) studies of solution-phase aggregation dynamics of PS I suspensions in both the presence and absence of an applied electric field support these observations and clearly demonstrate that the externally imposed electric field effectively fragments large PS I aggregates in the solution phase, thereby permitting a uniform deposition of PS I trimers on SAM/Au substrates.

Modulation of cyanobacterial photosystem I deposition properties on alkanethiolate Au substrate by various experimental conditions

We present results from atomic force microscopy (AFM) images indicating various experimental conditions, which alter the morphological characteristics of self-assembled cyanobacterial PS I on hydroxyl-terminated self-assembled alkanethiolate monolayers (SAM/Au) substrates. AFM topographical images of SAM/Au substrates incubated in solutions containing different PS I concentrations solubilized with Triton X-100 as the detergent reveal large columnar aggregates (∼100 nm and hence, much taller than a single PS I trimer) at high PS I concentrations. Depositions from dilute PS I suspensions reveal fewer aggregates and relatively uniform surface topography (∼10 nm). Confocal fluorescence microscopy analysis of fluorescently tagged PS I deposited on to SAM/Au substrates using electric field and gravity driven techniques reveal preliminary indications of directionally aligned PS I attachments, besides corroborating a uniform monolayer formation, for the former deposition method. The complex attachment dynamics of PS I onto SAM substrates are further investigated from the AFM images of PS I/SAM/Au substrates prepared under different experimental conditions using: 1) PS I isolated as monomers and trimers 2) adsorption at elevated temperatures, and 3) different detergents with varying pH values. In each of the cases, the surface topology indicated distinct yet complex morphological and phase characteristics. These observations provide useful insight into the use of experimental parameters to alter the morphological assembly of PS I on to SAM substrates en route to successful fabrication of PS I based biohybrid photoelectrochemical devices.

Nano-scale characterization of the dynamics of the chloroplast Toc translocon.

Translocons are macromolecular nano-scale machines that facilitate the selective translocation of proteins across membranes. Although common in function, different translocons have evolved diverse molecular mechanisms for protein translocation. Subcellular organelles of endosymbiotic origin such as the chloroplast and mitochondria had to evolve/acquire translocons capable of importing proteins whose genes were transferred to the host genome. These gene products are expressed on cytosolic ribosomes as precursor proteins and targeted back to the organelle by an N-terminal extension called the transit peptide or presequence. In chloroplasts the transit peptide is specifically recognized by the Translocon of the Outer Chloroplast membrane (Toc) which is composed of receptor GTPases that potentially function as gate-like switches, where GTP binding and hydrolysis somehow facilitate preprotein binding and translocation. Compared to other translocons, the dynamics of the Toc translocon are probably more complex and certainly less understood. We have developed biochemical/biophysical, imaging, and computational techniques to probe the dynamics of the Toc translocon at the nanoscale. In this chapter we provide detailed protocols for kinetic and binding analysis of precursor interactions in organeller, measurement of the activity and nucleotide binding of the Toc GTPases, native electrophoretic analysis of the assembly/organization of the Toc complex, visualization of the distribution and mobility of Toc apparatus on the surface of chloroplasts, and conclude with the identification and molecular modeling Toc75 POTRA domains. With these new methodologies we discuss future directions of the field.

A simple atomic force microscopy method for the visualization of polar and non-polar parts in thin organic films

Here we present a scanning probe microscopy method that allows for the identification of regions of different polarity (i.e. hydrophilicity) in thin organic films. This technique is based on the analysis of the difference between phase images generated at different applied bias voltages in tapping-mode atomic force microscopy. We show that, without any chemical modification of the microscope tip, it is possible to investigate surface properties of complex macromolecular layers, yielding new insight into the functional properties of the photosynthetic electron transport macromolecular complex, Photosystem I.