Michel Fromant

Identification in Archaea of a Novel D-Tyr-tRNATyr Deacylase

Most bacteria and eukarya contain an enzyme capable of specifically hydrolyzing d-aminoacyl-tRNA. Here, the archaea Sulfolobus solfataricus is shown to also contain an enzyme activity capable of recycling misaminoacylated d-Tyr-tRNATyr. N-terminal sequencing of this enzyme identifies open reading frame SS02234 (dtd2), the product of which does not present any sequence homology with the known d-Tyr-tRNATyr deacylases of bacteria or eukaryotes. On the other hand, homologs of dtd2 occur in archaea and plants. The Pyrococcus abyssi dtd2 ortholog (PAB2349) was isolated. It rescues the sensitivity to d-tyrosine of a mutant Escherichia coli strain lacking dtd, the gene of its endogeneous d-Tyr-tRNATyr deacylase. Moreover, in vitro, the PAB2349 product, which behaves as a monomer and carries 2 mol of zinc/mol of protein, catalyzes the cleavage of d-Tyr-tRNATyr. The three-dimensional structure of the product of the Archaeoglobus fulgidus dtd2 ortholog has been recently solved by others through a structural genomics approach (Protein Data Bank code 1YQE). This structure does not resemble that of Escherichia coli d-Tyr-tRNATyr deacylase. Instead, it displays homology with that of a bacterial peptidyl-tRNA hydrolase. We show, however, that the archaeal PAB2349 enzyme does not act against diacetyl-Lys-tRNALys, a model substrate of peptidyl-tRNA hydrolase. Based on the Protein Data Bank 1YQE structure, site-directed mutagenesis experiments were undertaken to remove zinc from the PAB2349 enzyme. Several residues involved in zinc binding and supporting the activity of the deacylase were identified. Taken together, these observations suggest evolutionary links between the various hydrolases in charge of the recycling of metabolically inactive tRNAs during translation.

IS4 transposition in the attenuator region of the Escherichia coli pheS, T operon

A cis-acting mutation which lowers phenylalanyl-tRNA synthetase operon (pheS,T) transcription about tenfold was previously isolated on a multicopy plasmid [Plumbridge and Springer, J. Bacteriol. 152 (1982) 650-668]. This mutation has now been characterized as an IS4 element inserted in orientation II in the terminator stem of the pheS,T attenuator. The identification of the insertion as IS4 is based on (i) the nature and location of restriction sites internal to the insertion element, and (ii) the DNA sequence of both the left and right Escherichia coli::IS4 junctions. The effect of the IS4 transposition on the expression of pheS,T was studied using pheS,T::lac fusions cloned in lambda phages. IS4 integration into the leader region of the pheS,T operon was shown to abolish the miaA (trpX) allele dependence which characterizes the attenuation mechanism regulating pheS,T expression [Fayat et al., J. Mol. Biol. 171 (1983) 239-261; Springer et al., J. Mol. Biol. 171 (1983) 263-279]. The IS4 insertion site described here is compared to the other known sites and the effect of IS4 transposition on the expression of neighbouring genes is discussed.

2D label-free imaging of resonant grating biochips in ultraviolet

2D images of label-free biochips exploiting resonant waveguide grating (RWG) are presented. They indicate sensitivities on the order of 1 pg/mm2 for proteins in air, and hence 10 pg/mm2 in water can be safely expected. A 320x256 pixels Aluminum-Gallium-Nitride-based sensor array is used, with an intrinsic narrow spectral window centered at 280 nm. The additional role of characteristic biological layer absorption at this wavelength is calculated, and regimes revealing its impact are discussed. Experimentally, the resonance of a chip coated with protein is revealed and the sensitivity evaluated through angular spectroscopy and imaging. In addition to a sensitivity similar to surface plasmon resonance (SPR), the RWGs resonance can be flexibly tailored to gain spatial, biochemical, or spectral sensitivity.

Effect of the overproduction of phenylalanyl- and threonyl-tRNA synthetases on tRNAPhe and tRNAThr concentrations in E. coli cells

Transformation of an E. coli strain with a recombinant plasmid DNA (pB1) encoding the genes for phenylalanyl- and threonyl-tRNA synthetases causes overproduction of these enzymes by about 100- and 5-fold, respectively. A possible effect of the overproduction of the two aminoacyl-tRNA synthetases on intracellular cognate tRNA levels has been searched for by comparing tRNAThr and tRNAPhe aminoacylation capacities in the RNA extracts from strains carrying pB1 or pBR322 plasmid DNA. The answer is that the levels of these tRNAs are not changed by selective increase of the cognate synthetases.

RNA-binding Site of Escherichia coli Peptidyl-tRNA Hydrolase

Background: Bacterial peptidyl-tRNA hydrolase is essential in recycling of ribosome-dissociated peptidyl-tRNAs. Results: Comparing minimalist substrates and using NMR mapping, the RNA-binding site of the hydrolase is characterized. Conclusion: Interaction between the hydrolase and tRNA involves features common to all elongator tRNAs. Significance: Knowledge of a bacterial peptidyl-tRNA hydrolase·substrate complex may drive the search for enzyme inhibitors. In a cell, peptidyl-tRNA molecules that have prematurely dissociated from ribosomes need to be recycled. This work is achieved by an enzyme called peptidyl-tRNA hydrolase. To characterize the RNA-binding site of Escherichia coli peptidyl-tRNA hydrolase, minimalist substrates inspired from tRNAHis have been designed and produced. Two minisubstrates consist of an N-blocked histidylated RNA minihelix or a small RNA duplex mimicking the acceptor and TψC stem regions of tRNAHis. Catalytic efficiency of the hydrolase toward these two substrates is reduced by factors of 2 and 6, respectively, if compared with N-acetyl-histidyl-tRNAHis. In contrast, with an N-blocked histidylated microhelix or a tetraloop missing the TψC arm, efficiency of the hydrolase is reduced 20-fold. NMR mapping of complex formation between the hydrolase and the small RNA duplex indicates amino acid residues sensitive to RNA binding in the following: (i) the enzyme active site region; (ii) the helix-loop covering the active site; (iii) the region including Leu-95 and the bordering residues 111–117, supposed to form the boundary between the tRNA core and the peptidyl-CCA moiety-binding sites; (iv) the region including Lys-105 and Arg-133, two residues that are considered able to clamp the 5′-phosphate of tRNA, and (v) the positively charged C-terminal helix (residues 180–193). Functional value of these interactions is assessed taking into account the catalytic properties of various engineered protein variants, including one in which the C-terminal helix was simply subtracted. A strong role of Lys-182 in helix binding to the substrate is indicated.

Detection of biological macromolecules on a biochip dedicated to UV specific absorption

This work describes an ultraviolet biosensing technique based on specific molecular absorption detected with a previously developed spectrally selective aluminum gallium nitride (AlGaN) based detector. Light absorption signal of DNA and proteins, respectively at 260 nm and 280 nm, is used to image biochips. To allow detection of protein or DNA monolayers at the surface of a biochip, we develop contrast-enhancing multilayer substrates. We analyze them through models and experiments and validate the possibility of measuring absorptions of the order of 10(-3). These multilayer structures display a high reflectivity, and maximize the interaction of the electric field with the biological element at the chip surface. Optimization of the experimental absorption, which includes effects such as roughness of the biochip, spectral and angular resolution of the optics, illumination, etc., is carried out with an inorganic ultraviolet absorber (titanium dioxide) deposit. We obtained an induced absorption contrast enhanced by a factor of 4.0, conferring enough sensitivity to detect monolayers of DNA or proteins. Experimental results on an Escherichia coli histidine-tagged methionyl-tRNA synthetase protein before and after complexation with an anti-polyHis specific antibody validate our biosensing technique. This label-free optical method may be helpful in controlling biochip coatings, and subsequent biological coupling at the surface of a biochip.

Biodetection of DNA and proteins using enhanced UV absorption by structuration of the chip surface

DNA and protein absorption at 260 and 280 nm can be used to reveal theses species on a biochip UV image. A first study including the design and fabrication of UV reflective multilayer biochips designed for UV contrast enhancement (factor of 4.0) together with spectrally selective AlGaN detectors demonstrated the control of chip biological coating, or Antigen/Antibody complexation with fairly good signals for typical probe density of 4x1012 molecules/cm2. Detection of fractional monolayer molecular binding requires a higher contrast enhancement which can be obtained with structured chips. Grating structures enable, at resonance, a confinement of light at the biochip surface, and thus a large interaction between the biological molecule and the lightwave field. The highest sensitivity obtained with grating-based biochip usually concerns a resonance shift, in wavelength or diffraction angle. Diffraction efficiency is also affected by UV absorption, due to enhanced light-matter interaction, and this mechanism is equally able to produce biochip images in parallel. By adjusting grating parameters, we will see how a biochip that is highly sensitive to UV absorption at its surface can be obtained. Based on the Ewald construction and diffraction diagram, instrumental resolution and smarter experimental configurations are considered. Notably, in conjunction with the 2D UV-sensitive detectors recently developed in-house, we discuss the obtainment of large contrast and good signals in a diffraction order emerging around the sample normal.

UV imaging of biochips based on resonant grating

In the frame of biological threat, security systems require label free biochips for rapid detection. Biosensors enable to detect biological interactions, between probes localized at the surface of a chip, and targets present in the sample solution. Here, we present an optical transduction, enabling 2D imaging, and consequently parallel detection of several reactions. It is based on the absorption of biological molecules in the UV domain. Thus, it is based on an intrinsic property of biological molecules and does not require any labelling of the biological molecules. DNA and proteins absorb UV light at 260 and 280 nm respectively. Sensitivity is a major requirement of biosensing devices. Configurations leading to enhancement of the interaction between light and biological molecules are of interest. For a better sensitivity, resonant grating structures are then studied. They enable to confine the electric field close to the biological layer. Imaging of resonant grating is not largely studied, even for visible wavelengths, but it results in good sensitivity. The protein used in this study is the methionyl-tRNA synthetase. Its absorption is representative of protein absorption, and it can then serve as a model for immunological detection. The best experimental contrast due to a monolayer of proteins is 40%. With data processing currently employed for biochip imaging: average on several acquisitions and on all the pixels imaging the biological spots, the device is able to detect a surface density of proteins in the 10 pg/mm range.

Contrast enhancement of UV absorption and improved biochip imaging

Biochip using UV absorption for selective DNA or proteins imaging may take advantage of sensitivity enhancement thanks to either multilayer structures or grating structures. We discuss the interest of coupled angular and spectral illumination.