Michele Ciccarelli

A new osteosynthesis device for the treatment of proximal humerus fractures. Description of the technique and preliminary results

The treatment of third proximal humerus complex fractures represents a challenge and osteosynthesis techniques are still controversial. The Authors report a new device that has been planned and used to treat this type of fracture, suitable for both young and elderly patients. The device consists of a perforated prismatic-triangular titanium cage (PTTC), available in different sizes so that it can be inserted in the bone cavity as a bridge. Thus, it supports the cephalic cap and, resting on the metaepiphyseal walls, allows greater and lesser tuberosities to be restored using osteosutures or minimal osteosynthesis devices. Furthermore, bone chips or bone substitutes can be inserted as filling in the perforated parts. From June 2005 to February 2006 we used this osteosynthesis surgical technique to treat 10 patients, 4 females and 6 males, all affected by proximal humerus complex fractures. No specific complications during and after surgery were noticed. The reported results are still to be considered as preliminary, but they are very encouraging. In all the cases the effective internal stabilisation allowed anatomical reduction of fragments, their stable fixation, reconstruction close to standard anatomy and early rehabilitation.

Medial reconstruction technique in the treatment of complex fractures of humeral proximal epiphysis with SMR prosthetic modular system

Prosthetic treatment of complex fractures of humeral proximal meta-epiphysis is a very complex surgery that often does not lead to satisfactory results. Indeed, although in the last 35 years since Neer’s studies some progress has been made in the knowledge of the anatomy of humeral meta-epiphysis proximal portion, surgical technique and prosthetic design, in the literature we find non-homogeneous experiences regarding the clinical-functional results. At the same time, such experiences agree as far as pain relief is concerned. We report our experience in the treatment of complex fractures of humeral proximal epiphysis with SMR (Lima Lto, San Daniele, Italy) prosthetic system, using our surgical technique of anatomical reconstruction, starting from the medial neck. The case histories, 35 patients, 30 women and 5 men, aged between 56 and 79, were reported in the observation period between April 2000 and February 2005. In 20 cases the right shoulder was treated and in 15 the left one. At the follow-up the patients were assessed clinically by the average Constant Score and also by X-rays and CT scan in order to measure the prosthesis height, its off-set and retroversion.

Arthroscopic repair of rotator cuff tears using absorbable anchors with a single-row technique

Purpose. To review outcomes of arthroscopic repair of rotator cuff tears using absorbable anchors with a single-row technique. Methods. 66 patients underwent arthroscopic repair for rotator cuff tears using absorbable anchors with a single-row technique. 51 of them aged 37 to 73 (mean, 57) years had been followed up for a mean of 29 (range, 20–37) months. The extent of the tear was classified as large, medium or small. Functional outcome was assessed using the Constant score. Constant scores and re-tear rates in 3 patient groups (classified by patient age and tear size) were compared. Results. Among the 66 patients, there were 24 large, 29 medium and 13 small cuff tears, and a total of 48, 37, and 18 anchors were used, respectively. Among the 51 patients, the median Constant score improved significantly after arthroscopy (30 vs. 73, p<0.0001). Six shoulders had complete re-tears; their median Constant score was 48 and their adjusted Constant score was 65%. Complete re-tears occurred more often in patients aged >60 years than in those aged 50 to 59 years and <50 years (4/15 vs. 1/22 vs. 1/14), and more often in patients with large tears than in those with medium and small tears (4/24 vs. 2/29 vs. 0/13). Conclusion. Arthroscopic repair of rotator cuff tears using absorbable anchors with a single-row technique is reliable in patients aged <60 years with small or medium tears.

Triangular block bridge method for surgical treatment of complex proximal humeral fractures: theoretical concept, surgical technique and clinical results

INTRODUCTION Criteria for classification, indication and choice of a surgical device to treat proximal humeral fractures are still controversial. We report an original technique based on a mechanical concept with a structural principle of a triangle as a rigid body applied to the humeral head fractures in association with other devices. This retrospective study aims to describe in detail the surgical technique and results at long time follow up. METHODS AND MATERIAL We analysed two series of 101 patients with proximal humeral fractures (mean age, 52.9 y; range 19-78 y) treated between 2001 and 2012 reporting the clinical and radiological results. In the first series of 23 cases (mean age 51.4 y, range 35-74 y) we used as support a bone piece taken from allograft or autologous tricortical iliac crest and shaped as a triangular pyramid during the operation; while in the second series of 78 cases (mean age 53.6 years, range 29-78 years, SD 13.5 years) a triangular titanium cage was used in 69 patients while in 9 allograft or bone substitute was used as augmentation. An analytical retrospective study was done to understand the mechanical function of medial augmentation composed by a solid body in association with different types of synthesis to stabilize properly a proximal humeral fracture. RESULTS We obtained excellent and good results in 83,2% of patients, fair in 12,8% and bad in 4% in terms of active anterior elevation, external and internal rotation, pain and strength according to Constant and DASH score. CONCLUSION A medial solid body, especially in titanium material and shaped as trapezoidal/pyramidal form used to fill the secondary bone loss in complex instable proximal humeral fracture, allows an anatomic reduction and stable fixation in association with simple and more complex tools and it provides a better biomechanical environment for union and maintenance of alignment.

Analysis of complications of reverse total shoulder arthroplasty.

PURPOSE the aim of this study was to analyze complications of reverse total shoulder arthroplasty (RTSA) used to treat different shoulder diseases. METHODS from March 2000 to March 2013, 195 RTSA were implanted by the senior Author. The indications for reverse prosthesis surgery were secondary osteoarthritis (OA) in 49 cases, irreparable rotator cuff tear (RCT) in 48 cases, and complex humeral fractures in 75 cases, while 19 were patients requiring surgical revision for first prosthesis implant. We used different prostheses with different designs. RESULTS the clinical and radiological results of all the patients were analyzed retrospectively at an average follow-up of 7 years. The cases were divided into four groups on the basis of the diagnosis and complications were classified as perioperative, postoperative, or late. The mean total Constant score improved from 28 to 69 points in the OA group; from 21 to 70.8 points in the irreparable RCT group, to 76.4 in the fracture group, and from 16.6 to 59.8 points in the revision group. Scapular notching was observed in 59 cases (30.2%). Thirty-three other complications (16.9%) were observed, namely: hematomas (n=3), instability of the humeral component (n=1), scapular spine fractures (n=2), ulnar nerve deficit (n=2), long thoracic nerve palsy (n=2), deep infections (n=2), periprosthetic fractures (n=6), glenoid fractures (n=2), implant loosening (n=2), anterior deltoid muscle deficiency (n=2) and periarticular heterotopic calcifications (n=9). CONCLUSIONS the rates of complications, especially fractures, reported in the present study were lower than those reported in the current literature. LEVEL OF EVIDENCE Level IV, therapeutic case series.