Michele Guala
University of Minnesota
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Michele Guala.
Journal of Fluid Mechanics | 2011
Michele Guala; Meredith Metzger; B. J. McKeon
Simultaneous streamwise velocity measurements across the vertical direction obtained in the atmospheric surface layer (Re_τ ≃ 5 × 10^5) under near thermally neutral conditions are used to outline and quantify interactions between the scales of turbulence, from the very-large-scale motions to the dissipative scales. Results from conditioned spectra, joint probability density functions and conditional averages show that the signature of very-large-scale oscillations can be found across the whole wall region and that these scales interact with the near-wall turbulence from the energy-containing eddies to the dissipative scales, most strongly in a layer close to the wall, z^+ ≲ 10^3. The scale separation achievable in the atmospheric surface layer appears to be a key difference from the low-Reynolds-number picture, in which structures attached to the wall are known to extend through the full wall-normal extent of the boundary layer. A phenomenological picture of very-large-scale motions coexisting and interacting with structures from the hairpin paradigm is provided here for the high-Reynolds-number case. In particular, it is inferred that the hairpin-packet conceptual model may not be exhaustively representative of the whole wall region, but only of a near-wall layer of z^+ = O(10^3), where scale interactions are mostly confined.
Water Resources Research | 2010
F. Stössel; Michele Guala; Charles Fierz; Costantino Manes; Michael Lehning
The formation, growth, and destruction of surface hoar crystals is an important feature of mountain snow covers as buried surface hoar layers are a frequent weak layer leading to unstable snowpacks. The energy and mass exchange associated with surface hoar dynamics is further an important part of land-atmosphere interaction over snow. A quantitative prediction of surface hoar evolution based on local environmental conditions is, however, difficult. We carried out measurements of crystal hoar size and total surface mass changes in the period between January and March 2007 on the Weissfluhjoch study plot of the WSL Institute for Snow and Avalanche Research SLF, located above Davos, Switzerland, at 2540 m above sea level. For the first time, a direct comparison between eddy correlation measurements of latent heat flux and lysimeter-like measurements of surface mass change has been made. Results show that the growth of surface hoar crystals is very well correlated with deposition of water vapor during clear-sky nights as measured by two eddy correlation systems placed close to the ground. By analyzing local meteorological data, we confirm that low to moderate wind speed, humid air, and clear-sky nights are the necessary ingredients for the occurrence of significant vapor fluxes toward the surface and thus for the growth of surface hoar. We also confirm that surface hoar crystals tend to preserve during daytime, when strong sublimation occurs, although their size significantly reduces. Despite the complexities associated with mountain terrain and snow surfaces, such as nonequilibrium boundary layers and stratification effects, the hoar formation could be predicted by the snow cover model SNOWPACK, which uses a bulk Monin-Obukhov (MO) parameterization for the turbulent heat fluxes. On the basis of the comparison between direct observations and model predictions, we suggest that neutral stability conditions in the MO formulation provide the most stable and least flawed prediction for surface hoar formation.
Journal of Turbulence | 2012
Leonardo P. Chamorro; Michele Guala; Roger E. A. Arndt; Fotis Sotiropoulos
Wind-tunnel experimental data from the wake of a model wind turbine were used to provide a scale-by-scale energetic description of the flow at various locations downwind of the turbine. Pre-multiplied spectra of the streamwise and vertical velocity components were considered for the analysis and compared with those obtained in the base flow (smooth wall condition). Results showed that in the relatively high-frequency range, the turbine induces strong turbulent energy into the wake, which is an indicator of its active character. However, large scales and very large scales were observed to be dampened in the wake close to the wall, implying that the turbine also acts as a high-pass filter. These two distinct processes occurring in the wake suggest to conceptualize and model the turbine as an ‘active filter’. Various terms in the turbulent kinetic energy (TKE) equation were also estimated at different locations to study the physical processes modulating the enhanced levels of turbulence intensity observed in...
Journal of Biomechanical Engineering-transactions of The Asme | 2009
Evangelos Boutsianis; Michele Guala; Ufuk Olgac; Simon Wildermuth; Klaus Hoyer; Yiannis Ventikos; Dimos Poulikakos
There is considerable interest in computational and experimental flow investigations within abdominal aortic aneurysms (AAAs). This task stipulates advanced grid generation techniques and cross-validation because of the anatomical complexity. The purpose of this study is to examine the feasibility of velocity measurements by particle tracking velocimetry (PTV) in realistic AAA models. Computed tomography and rapid prototyping were combined to digitize and construct a silicone replica of a patient-specific AAA. Three-dimensional velocity measurements were acquired using PTV under steady averaged resting boundary conditions. Computational fluid dynamics (CFD) simulations were subsequently carried out with identical boundary conditions. The computational grid was created by splitting the luminal volume into manifold and nonmanifold subsections. They were filled with tetrahedral and hexahedral elements, respectively. Grid independency was tested on three successively refined meshes. Velocity differences of about 1% in all three directions existed mainly within the AAA sack. Pressure revealed similar variations, with the sparser mesh predicting larger values. PTV velocity measurements were taken along the abdominal aorta and showed good agreement with the numerical data. The results within the aneurysm neck and sack showed average velocity variations of about 5% of the mean inlet velocity. The corresponding average differences increased for all velocity components downstream the iliac bifurcation to as much as 15%. The two domains differed slightly due to flow-induced forces acting on the silicone model. Velocity quantification through narrow branches was problematic due to decreased signal to noise ratio at the larger local velocities. Computational wall pressure and shear fields are also presented. The agreement between CFD simulations and the PTV experimental data was confirmed by three-dimensional velocity comparisons at several locations within the investigated AAA anatomy indicating the feasibility of this approach.
Journal of Fluid Mechanics | 2005
Michele Guala; Beat Lüthi; Alex Liberzon; A. Tsinober; Wolfgang Kinzelbach
The evolution of material lines,
Journal of Turbulence | 2008
Michele Guala; Alex Liberzon; Klaus Hoyer; A. Tsinober; Wolfgang Kinzelbach
l
Physics of Fluids | 2005
Alex Liberzon; Michele Guala; Beat Lüthi; Wolfgang Kinzelbach; A. Tsinober
, and vorticity,
Journal of Fluid Mechanics | 2005
Guido Zolezzi; Michele Guala; Donatella Termini; Giovanni Seminara
\omega
Nature Communications | 2014
Jiarong Hong; Mostafa Toloui; Leonardo P. Chamorro; Michele Guala; Kevin Howard; Sean Riley; James Tucker; Fotis Sotiropoulos
, is investigated experimentally through three-dimensional particle-tracking velocimetry (3D-PTV) in quasi-homogeneous isotropic turbulence at
Journal of Fluid Mechanics | 2007
Michele Guala; Alex Liberzon; A. Tsinober; Wolfgang Kinzelbach
Re_{\lambda }\,{=}\,50