Michele Tamagnone

Reconfigurable terahertz plasmonic antenna concept using a graphene stack

The concept and analysis of a Terahertz (THz) frequency-reconfigurable antenna using graphene are presented. The antenna exploits dipole-like plasmonic resonances that can be frequency-tuned on large range via the electric field effect in a graphene stack. In addition to efficient dynamic control, the proposed approach allows high miniaturization and good direct matching with continuous wave THz sources. A qualitative model is used to explain the excellent impedance stability under reconfiguration. These initial results are very promising for future all-graphene THz transceivers and sensors. Keywords: Reconfigurable antenna, Graphene, Plasmons, Terahertz, frequency-tuning.

Tunable graphene reflective cells for THz reflectarrays and generalized law of reflection

A tunable graphene-based reflective cell operating at THz is proposed for use in reconfigurable-beam reflectarrays, or similarly to implement the so-called generalized law of reflection. The change in the complex conductivity of graphene when biased by an electric field allows controlling the phase of the reflected field at each element of the array. Additionally, the slow wave propagation supported by graphene drastically reduces the dimensions of the cell, which allows smaller inter-element spacing hence better array performance. An elementary cell is optimized and its scattering parameters computed, demonstrating a dynamic phase range of 300° and good loss figure for realistic chemical potential variations. Finally, a circuit model is proposed and shown to very accurately predict the element response.

Fundamental limits and near-optimal design of graphene modulators and non-reciprocal devices

Recent demonstrations of modulators, polarization rotators and isolators have indicated the potential of graphene for photonic applications. The present study investigates the fundamental limits and near-optimal design of graphene modulators and non-reciprocal devices.

Comment on ‘Encoding many channels on the same frequency through radio vorticity: first experimental test’

We show that the public experiment held in Venice by Tamburini et al and reported in 2012 New J. Phys. 14 033001 can be regarded as a particular implementation of multiple-input–multiple-output (MIMO) communications and, therefore, has no advantages over established techniques. Moreover, we explain that the use of a ‘vortex’ mode (orbital angular momentum ` = 1) at one of the transmit antennas is not necessary to encode different channels since only different patterns—or similarly different pointing angles—of the transmit antennas are required. Finally, we identify why this MIMO transmission allowed the decoding of two signals, despite being line-of-sight. This is due to the large separation between the receiving antennas, which places the transmit antennas in the near-field Fresnel region of the receiving ‘array’. This severely limits the application of this technique in practice, since, for a fixed separation between receiving antennas, the detectable signal power from any additional vortex mode decays at least as 1/r 4.

Near optimal graphene terahertz non-reciprocal isolator.

Isolators, or optical diodes, are devices enabling unidirectional light propagation by using non-reciprocal optical materials, namely materials able to break Lorentz reciprocity. The realization of isolators at terahertz frequencies is a very important open challenge made difficult by the intrinsically lossy propagation of terahertz radiation in current non-reciprocal materials. Here we report the design, fabrication and measurement of a terahertz non-reciprocal isolator for circularly polarized waves based on magnetostatically biased monolayer graphene, operating in reflection. The device exploits the non-reciprocal optical conductivity of graphene and, in spite of its simple design, it exhibits almost 20 dB of isolation and only 7.5 dB of insertion loss at 2.9 THz. Operation with linearly polarized light can be achieved using quarter-wave plates as polarization converters. These results demonstrate the superiority of graphene with respect to currently used terahertz non-reciprocal materials and pave the way to a novel class of optimal non-reciprocal devices.

Gate-controlled mid-infrared light bending with aperiodic graphene nanoribbons array

Graphene plasmonic nanostructures enable subwavelength confinement of electromagnetic energy from the mid-infrared down to the terahertz frequencies. By exploiting the spectrally varying light scattering phase at the vicinity of the resonant frequency of the plasmonic nanostructure, it is possible to control the angle of reflection of an incoming light beam. We demonstrate, through full-wave electromagnetic simulations based on Maxwell equations, the electrical control of the angle of reflection of a mid-infrared light beam by using an aperiodic array of graphene nanoribbons, whose widths are engineered to produce a spatially varying reflection phase profile that allows for the construction of a far-field collimated beam towards a predefined direction.

Comment on ‘Reply to Comment on “Encoding many channels on the same frequency through radio vorticity: first experimental test” ’

We show that the reply by Tamburini et al (2012 New J. Phys. 14 118002) to our previous comment (2012 New J. Phys. 14 118001) on the experiment reported in Tamburini et al (2012 New J. Phys. 14 033001) does not actually invalidate any of the issues raised in our initial comment.

Steep-slope Metal-Insulator-Transition VO2 Switches with Temperature-Stable High ION

This letter reports a detailed experimental investigation of the slope of the current switching between OFF and ON states exploiting the metal-insulator-transition (MIT) in vanadium dioxide devices. The reported devices are CMOS compatible two-terminal switches. We experimentally demonstrate for the first time the very little dependence on temperature of the steep slope of these switches, ranging from 0.24 mV/decade at room temperature, to 0.38 mV/decade at 50 °C. The fabricated devices show excellent ON-state conduction, with ION > 1.8 mA/μm or RON <; 3 mΩ/μm, for the whole range of investigated temperatures (from room temperature to the MIT transition temperature), which recommends them as future candidates for steep-slope, highly conductive, and temperature-stable switches.

Nonlocal electromagnetic response of graphene nanostructures

Nonlocal electromagnetic effects of graphene arise from its naturally dispersive dielectric response. We present semianalytical solutions of nonlocal Maxwells equations for graphene nanoribbon arrays with features around 100 nm, where we found prominent departures from its local response. Interestingly, the nonlocal corrections are stronger for light polarization parallel to the ribbons, which manifests as an additional broadening of the Drude peak. For the perpendicular polarization case, nonlocal effects lead to blue-shifts of the plasmon peaks. These manifestations provide a physical measure of nonlocal effects, and we quantify their dependence on the ribbon width, doping, and wavelength.

Tri-Band, Polarization-Independent Reflectarray at Terahertz Frequencies: Design, Fabrication, and Measurement

In this paper, two THz reflectarray surfaces have been designed and fabricated in order to deflect a plane wave with any polarization and with a specific incident angle to three different specific directions each at distinct three frequencies of 0.7, 1.0 and 1.5 THz. The surface is composed of an array of 100 ×100 cells, each comprised of gold crosses and parasitic dipoles printed on thin grounded high resistivity silicon. Finite-element method (FEM) simulations are in line with the measurement results obtained using THz time-domain spectroscopy (THz TDS) showing the intended deflections for the two fabricated samples each with an arbitrary frequency-vs-deflection angle relationship. In addition, the use of silicon as the substrate paves the way for the integration of reconfigurable technologies which enhances the reflectarray versatility.