Michelle L. Edwards

Gemini multiconjugate adaptive optics system review – II. Commissioning, operation and overall performance

The Gemini Multi-conjugate Adaptive Optics System - GeMS, a facility instrument mounted on the Gemini South telescope, delivers a uniform, near di↵raction limited images at near infrared wavelengths (0.95 µm - 2.5 µm) over a field of view of 120 00 . GeMS is the first sodium layer based multi laser guide star adaptive optics system used in astronomy. It uses five laser guide stars distributed on a 60 00 square constellation to measure for atmospheric distortions and two deformable mirrors to compensate for it. In this paper, the second devoted to describe the GeMS project, we present the commissioning, overall performance and operational scheme of GeMS. Performance of each sub-system is derived from the commissioning results. The typical image quality, expressed in full with half maximum, Strehl ratios and variations over the field delivered by the system are then described. A discussion of the main contributor to performance limitation is carried-out. Finally, overheads and future system upgrades are described.

GeMS: first on-sky results

GeMS, the Gemini Laser Guide Star Multi-Conjugate Adaptive Optics facility system, has seen first light in December 2011, and has already produced images with H band Strehl ratio in excess of 35% over fields of view of 85x85 arcsec, fulfilling the MCAO promise. In this paper, we report on these early results, analyze trends in performance, and concentrate on key or novel aspects of the system, like centroid gain estimation, on-sky non common path aberration estimation. We also present the first astrometric analysis, showing very encouraging results.

Results from the commissioning of the Gemini South Adaptive Optics Imager (GSAOI) at Gemini South Observatory

We present the results from the commissioning of the Gemini South Adaptive Optics Imager (GSAOI). Capable of delivering diffraction limited images in the near-infrared, over an 85′′ ×85′′ square field-of-view, GSAOI was designed for use with the Gemini Multi-Conjugate Adaptive Optics (GeMS) system in operation at the Gemini South Observatory. The instrument focal plane, covered by an array of four HAWAII-2RG detectors, contains 4080×4080 pixels and has a plate scale of 0.02′′ – thus capitalizing on the superb image quality delivered by both the all-refractive optical design of GSAOI and the Gemini South MCAO system. Here, we discuss our preliminary findings from the GSAOI commissioning, concentrating on detector characterization, on-sky performance and system throughput. Further specifics about the Gemini MCAO system can be found in other presentations at this conference.

Science readiness of the Gemini MCAO system: GeMS

The Gemini Multi-Conjugate Adaptive Optics System (GeMS) began its on-sky commissioning in January 2011. The system provides high order wide field corrections using a constellation of five Laser Guide Stars. In December 2011, commissioning culminated in images with a FWHM of 80±2mas at 1.65 microns (H band) over an 87 x 87 arcsecond field of view. The first images have already demonstrated the scientific potential of GeMS, and after more than a year of commissioning GeMS is finally close to completion and ready for science. This paper presents a general status of the GeMS project and summarizes the achievements made during more than a year of commissioning. The characterization of GeMS performance is presented in a companion paper: “GeMS on-sky results”, Rigaut et al. Here we report on the sub-systems performance, discuss current limitations and present proposed upgrades. The integration of GeMS into the observatory operational scheme is detailed. Finally, we present the plans for next years operations with GeMS.

Current status of the facility instrumentation suite at the Large Binocular Telescope Observatory

The current status of the facility instrumentation for the Large Binocular Telescope (LBT) is reviewed. The LBT encompasses two 8.4 meter primary mirrors on a single mount yielding an effective collecting area of 11.8 meters or 23 meters when interferometrically combined. The three facility instruments at LBT include: 1) the Large Binocular Cameras (LBCs), each with a 23’× 25’ field of view (FOV). The blue optimized and red optimized optical wavelength LBCs are mounted at the prime focus of the SX (left) and DX (right) primary mirrors, respectively. Combined, the filter suite of the two LBCs cover 0.3-1.1 μm, including the addition of new medium-band filters centered on TiO (0.78 μm) and CN (0.82 μm); 2) the Multi-Object Double Spectrograph (MODS), two identical optical spectrographs each mounted at the straight through f/15 Gregorian focus of the primary mirrors. The capabilities of MODS-1 and -2 include imaging with Sloan filters (u, g, r, i, and z) and medium resolution (R ∼ 2000) spectroscopy, each with 24 interchangeable masks (multi-object or longslit) over a 6’× 6’ FOV. Each MODS is capable of blue (0.32-0.6 μm) and red (0.5-1.05 μm) wavelength only spectroscopy coverage or both can employ a dichroic for 0.32-1.05 μm wavelength coverage (with reduced coverage from 0.56- 0.57 μm); and 3) the two LBT Utility Camera in the Infrared instruments (LUCIs), are each mounted at a bent-front Gregorian f/15 focus of a primary mirror. LUCI-1 and 2 are designed for seeing-limited (4’× 4’ FOV) and active optics using thin-shell adaptive secondary mirrors (0.5’× 0.5’ FOV) imaging and spectroscopy over the wavelength range of 0.95-2.5 μm and spectroscopic resolutions of 400 ≤ R ≤ 11000 (depending on the combination of grating, slits, and cameras used). The spectroscopic capabilities also include 32 interchangeable multi-object or longslit masks which are cryogenically cooled. Currently all facility instruments are in-place at the LBT and, for the first time, have been on-sky for science observations. In Summer 2015 LUCI-1 was refurbished to replace the infrared detector; to install a high-resolution camera to take advantage of the active optics SX secondary; and to install a grating designed primarily for use with high resolution active optics. Thus, like MODS-1 and -2, both LUCIs now have specifications nearly identical to each other. The software interface for both LUCIs have also been replaced, allowing both instruments to be run together from a single interface. With the installation of all facility instruments finally complete we also report on the first science use of “mixed-mode” operations, defined as the combination of different paired instruments with each mirror (i.e. LBC+MODS, LBC+LUCI, LUCI+MODS). Although both primary mirrors reside on a single fixed mount, they are capable of operating as independent entities within a defined “co-pointing” limit. This provides users with the additional capability to independently dither each mirror or center observations on two different sets of spatial coordinates within this limit.

The Canarias Infrared Camera Experiment (CIRCE): optical and opto-mechanical design and manufacture

We report on the design status of the Canarias InfraRed Camera Experiment (CIRCE), a near-infrared visitor instrument for the 10.4 meter Gran Telescopio Canarias (GTC). In addition to functioning as a 1-2.5 micron imager, CIRCE will have the capacity for narrow-band imaging, low-and moderate- resolution grism spectroscopy, and imaging polarimetry. CIRCEs all-reflective aspheric optical design offers excellent throughput and image quality. We present an analysis of the optical layout and the progress of the opto-mechanical design and manufacture.

A DETAILED STUDY OF THE STRUCTURE OF THE NESTED PLANETARY NEBULA, Hb 12, THE MATRYOSHKA NEBULA

We present near-IR, integral field spectroscopic observations of the planetary nebula (PN) Hb 12 using Near-infrared Integral Field Spectrograph (NIFS) on Gemini-North. Combining NIFS with the adaptive optics system Altair, we provide a detailed study of the core and inner structure of this PN. We focus the analysis in the prominent emission lines [Fe II] (1.6436 μm), He I (2.0585 μm), H2 (2.1214 μm), and Brγ (2.16553 μm). We find that the [Fe II] emission traces a tilted system of bipolar lobes, with the northern lobe being redshifted and the southern lobe blueshifted. The [Fe II] emission is very faint at the core and only present close to the systemic velocity. There is no H2 emission in the core, whereas the core is prominent in the He I and Brγ recombination lines. The H2 emission is concentrated in equatorial arcs of emission surrounding the core and expanding at ~30 km s–1. These arcs are compared with Hubble Space Telescope images and shown to represent nested loops belonging to the inner sections of a much larger bipolar structure that replicates the inner one. The He I and Brγ emission from the core clearly show a cylindrical central cavity that seems to represent the inner walls of an equatorial density enhancement or torus. The torus is 02 wide (≡200 AU radius at a distance of 2000 pc) and expanding at ≤30 km s–1. The eastern wall of the inner torus is consistently more intense than the western wall, which could indicate the presence of an off-center star, such as is observed in the similar hourglass PN, MyCn 18. A bipolar outflow is also detected in Brγ emerging within 01 from the core at ~ ± 40 km s–1.

An overview and the current status of instrumentation at the Large Binocular Telescope Observatory

An overview of instrumentation for the Large Binocular Telescope (LBT) is presented. Optical instrumentation includes the Large Binocular Camera (LBC), a pair of wide-field (24′ × 24′) mosaic CCD imagers at the prime focus, and the Multi-Object Double Spectrograph (MODS), a pair of dual-beam blue-red optimized long-slit spectrographs mounted at the left and right direct F/15 Gregorian foci incorporating multiple slit masks for multi-object spectroscopy over a 6′ field and spectral resolutions of up to 2000. Infrared instrumentation includes the LBT Near-IR Spectrometer (LUCI), a modular near–infrared (0.9-2.5 μm) imager and spectrograph pair mounted at the left and right front–bent F/15 Gregorian foci and designed for seeing-limited (FOV: 4′ × 4′) imaging, long-slit spectroscopy, and multi-object spectroscopy utilizing cooled slit masks and diffraction limited (FOV: 0.5 x 0.5) imaging and long-slit spectroscopy. Strategic instruments under development that can utilize the full 23 m baseline of the LBT include an interferometric cryogenic beam combiner with near-infrared and thermal-infrared instruments for Fizeau imaging and nulling interferometry (LBTI) and an optical bench near- infrared beam combiner utilizing multi-conjugate adaptive optics for high angular resolution and sensitivity (LINC-NIRVANA). LBTI is currently undergoing commissioning and performing science observations on the LBT utilizing the installed adaptive secondary mirrors in both single–sided and two–sided beam combination modes. In addition, a fiber-fed bench spectrograph (PEPSI) capable of ultra high resolution spectroscopy and spectropolarimetry (R = 40,000-300,000) will be available as a principal investigator instrument. Installation and testing of the bench spectrograph will begin in July 2014. Over the past four years the LBC pair, LUCI1, and MODS1 have been commissioned and are now scheduled for routine partner science observations. Both LUCI2 and MODS2 passed their laboratory acceptance milestones in the summer of 2013 and have been installed on the LBT. LUCI2 is currently being commissioned and the data analysis is well underway. Diffraction–limited commissioning of its adaptive optics modes will begin in the 2014B semester. MODS2 commissioning began in May 2014 and will completed in the 2014B semester as well. Binocular testing and commissioning of both the LUCI and MODS pairs will begin in 2014B with the goal that this capability could be offered sometime in 2015. The availability of all these instruments mounted simultaneously on the LBT permits unique science, flexible scheduling, and improved operational support.

LBT prime focus camera (LBC) control software upgrades

The control software of the Large Binocular Telescopes (LBT) double prime focus cameras (LBC) has been in use for a decade: the software passed acceptance testing in April 2004 and is currently in routine use for science. LBC was the first light instrument of the telescope. Over the last decade of use, the control software has changed as operations with the telescope have evolved. The major updates to the LBC control software since 2004 are described, including details for the upgrade to a single control computer from the current five computer architecture.

The Gemini Multi-Conjugate Adaptive System sees star light

The Gemini Multi-Conjugate Adaptive Optics system (GeMS) has been in commissioning in the first 5 months of 2011. In this paper we present the first results of this commissioning period and plans for the future.