Miguel A. Ruiz

Activation of H-H and H-O bonds at phosphorus with diiron complexes bearing pyramidal phosphinidene ligands.

The complex [Fe(2)Cp(2)(μ-PMes*)(μ-CO)(CO)(2)] (Mes* = 2,4,6-C(6)H(2)(t)Bu(3)), which in the solid state displays a pyramidal phosphinidene bridge, reacted at room temperature with H(2) (ca. 4 atm) to give the known phosphine complex [Fe(2)Cp(2)(μ-CO)(2)(CO)(PH(2)Mes*)] as the major product, along with small amounts of other byproducts arising from the thermal degradation of the starting material, such as the phosphindole complex [Fe(2)Cp(2)(μ-CO)(2)(CO){PH(CH(2)CMe(2))C(6)H(2)(t)Bu(2)}], the dimer [Fe(2)Cp(2)(CO)(4)], and free phosphine PH(2)Mes*. During the course of the reaction, trace amounts of the mononuclear phosphide complex [FeCp(CO)(2)(PHMes*)] were also detected, a compound later found to be the major product in the carbonylation of the parent phosphinidene complex, with this reaction also yielding the dimer [Fe(2)Cp(2)(CO)(4)] and the known diphosphene Mes*P═PMes*. The outcome of the carbonylation reactions of the title complex could be rationalized by assuming the formation of an unstable tetracarbonyl intermediate [Fe(2)Cp(2)(μ-PMes*)(CO)(4)] (undetected) that would undergo a fast homolytic cleavage of a Fe-P bond, this being followed by subsequent evolution of the radical species so generated through either dimerization or reaction with trace amounts of water present in the reaction media. A more rational synthetic procedure for the phosphide complex was accomplished through deprotonation of the phosphine compound [FeCp(CO)(2)(PH(2)Mes*)](BF(4)) with Na(OH), the latter in turn being prepared via oxidation of [Fe(2)Cp(2)(CO)(4)] with [FeCp(2)](BF(4)) in the presence of PH(2)Mes*. To account for the hydrogenation of the parent phosphinidene complex it was assumed that, in solution, small amounts of an isomer displaying a terminal phosphinidene ligand would coexist with the more stable bridged form, a proposal supported by density functional theory (DFT) calculations of both isomers, with the latter also revealing that the frontier orbitals of the terminal isomer (only 5.7 kJ mol(-1) above of the bridged isomer, in toluene solution) have the right shapes to interact with the H(2) molecule. In contrast to the above behavior, the cyclohexylphosphinidene complex [Fe(2)Cp(2)(μ-PCy)(μ-CO)(CO)(2)] failed to react with H(2) under conditions comparable to those of its PMes* analogue. Instead, it slowly reacted with HOR (R = H, Et) to give the corresponding phosphinous acid (or ethyl phosphinite) complexes [Fe(2)Cp(2)(μ-CO)(2)(CO){PH(OR)Mes*}], a behavior not observed for the PMes* complex. The presence of BEt(3) increased significantly the rate of the above reaction, thus pointing to a pathway initiated with deprotonation of an O-H bond of the reagent by the basic P center of the phosphinidene complex, this being followed by the nucleophilic attack of the OR(-) anion at the P site of the transient cationic phosphide thus formed. The solid-state structure of the cis isomer of the ethanol derivative was determined through a single crystal X-ray diffraction study (Fe-Fe = 2.5112(8) Å, Fe-P = 2.149(1) Å).

Aurophilic Self-Assembly of a Mo4Au2 Phosphinidene Complex with an Unprecedented H-Shaped Planar Metal Core

The isomers [Mo2Cp2(mu-kappa(1):kappa(1),eta(6)-PR*)(CO)2] (1) and [Mo2Cp(mu-kappa(1):kappa(1),eta(5)-PC5H4)(CO)2(eta(6)-HR*)] (2) (Cp = eta(5)-C5H5; R* = 2,4,6-C6H2(t)Bu3) react with [AuCl(THT)] and with the cation [Au(THT)2](+) (THT = tetrahydrothiophene) to give phosphinidene-bridged Mo2Au complexes resulting from the addition of an AuCl or Au(THT)(+) electrophile to their multiple P-Mo bonds. Removal of the Cl(-) or THT ligand from these derivatives causes a dimerization of the trinuclear structures to give the cationic derivative [{AuMo2Cp(mu3-kappa(1):kappa(1):kappa(1),eta(5)-PC5H4)(CO)2(eta(6)-HR*)}2](2+), which displays a novel H-shaped metal core held by strong Mo-Au dative bonds [2.768(1) A] and an aurophilic interaction [Au-Au = 3.022(1) A].

Reactivity of the unsaturated dihydrides [Mn2(µ-H)2(CO)6(µ-L2)] towards boron, silicon, and tin hydrides [L2= Ph2PCH2PPh2, (EtO)2POP(OEt)2]. X-Ray crystal structures of [Mn2(µ-H)(µ-BH4)(CO)6(µ-Ph2PCH2PPh2)] and [Mn2(µ-SnPh2)2(CO)6{µ-(EtO)2POP(OEt)2}]

The unsaturated dihydrocomplexes [Mn2(µ-H)2(CO)6(µ-L2)][L2= Ph2PCH2PPH2, dppm; L2=(EtO)2POP(OEt)2, tedip] react under mild conditions with boron, silicon, or tin hydrides via insertion or elimination (H2,C6H6) processes to afford the novel dimangano–main group element species [Mn2(µ-H)(µ-BH4)(CO)6(µ-dppm)]; [Mn2(µ-H2SiPh2)(CO)6(µ-dppm)], [Mn2(µ-H)(µ-HSnPh2)(CO)6(µ-L2)], or [Mn2(µ-SnPh2)2(CO)6(µ-L2)]; the crystal structures of the latter (L2= tedip) and the tetrahydroborate complex have been determined.

Proton induced P–H and Mo–H bond activation at the phosphide bridged dimolybdenum complexes [Mo2Cp2(µ-H)(µ-PHR)(CO)4](R = Cy, 2,4,6-C6H2R′3; R′= H, Me, tBu)

The new hydride complexes [Mo2Cp2(mu-H)(mu-PHR)(CO)4] having bulky substituents (R = 2,4,6-C(6)H2tBu3= Mes*, R = 2,4,6-C6H2Me3= Mes) have been prepared in good yield by addition of Li[PHR] to the triply bonded [Mo2Cp2(CO)4] and further protonation of the resulting anionic phosphide complex [Mo2Cp2(mu-PHR)(CO)4]-. Protonation of the Mes* compound with either [H(OEt2)2][B{3,5-C6H3(CF3)2}4] or HBF4.OEt2 gives the cationic phosphinidene complex [Mo2Cp2(mu-H)(mu-PMes*)(CO)4]+ in high yield. In contrast, protonation of the analogous hydride compounds with Mes or Cy substituents on phosphorus give the corresponding unsaturated tetracarbonyls [Mo2Cp2(mu-PHR)(CO)4]+, which are unstable at room temperature and display a cis geometry. Decomposition of the latter give the electron-precise pentacarbonyls [Mo2Cp2(mu-PHR)(mu-CO)(CO)4]+, also displaying a cis arrangement of the metal fragments. In the presence of BF4- as external anion, fluoride abstraction competes with carbonylation to yield the neutral fluorophosphide hydrides [Mo2Cp2(mu-H)(mu-PFR)(CO)4]. Similar results were obtained in the protonation reactions of the hydride compounds having a Ph substituent on phosphorus. In that case, using HCl as protonation reagent gave the chloro-complex [Mo2ClCp2(mu-PHPh)(CO)4] in good yield. The structures and dynamic behaviour of the new compounds are analyzed on the basis of solution IR and 1H, 31P, 19F and 13C NMR data as well as the X-ray studies carried out on [Mo2Cp2(mu-H)(mu-PHMes)(CO)4](cis isomer), [Mo2Cp2(mu-H)(mu-PFMes)(CO)4](trans isomer), [Mo2Cp2(mu-PHCy)(mu-CO)(CO)4](BF4) and [Mo2ClCp2(mu-PHPh)(CO)4].

Mild P4 activation to give an anionic diphosphorus complex with a dual binding ability at a single P site.

The anion [Mo(2)Cp(2)(μ-PCy(2))(μ-CO)(2)](-) (1; Li(+) salt) reacts at 290 K with P(4) to give the diphosphorus-bridged complex [Mo(2)Cp(2)(μ-PCy(2))(CO)(2)(μ-κ(2):κ(2)-P(2))](-) (2). The latter reacts with MeI and ClSnPh(3) through a single P atom to give respectively diphosphenyl [Mo(2)Cp(2)(μ-PCy(2))(CO)(2)(μ-κ(2):κ(2)-P(2)Me)] (3) and stannyl [Mo(2)Cp(2)(μ-PCy(2))(CO)(2){μ-κ(2):κ(2)-P(2)(SnPh(3))}] (4) derivatives, with the P-P-Sn angle in 4 being unexpectedly acute [80.3(1)°]. According to density functional theory calculations, this novel nucleophilic behavior of 1 is derived from its anionic nature, thus enabling the P(2) ligand to act in a π-donor-like fashion.

Chemistry of the Oxophosphinidene Ligand. 1. Electronic Structure of the Anionic Complexes [MCp{P(O)R*}(CO)2]- (M = Mo, W; R* = 2,4,6-C6H2tBu3) and Their Reactions with H+ and C-Based Electrophiles

The anionic phosphide-bridged complexes (H-DBU)[M(2)Cp(2)(μ-PHR*)(CO)(4)] (M = Mo, W; R* = 2,4,6-C(6)H(2)(t)Bu(3); Cp = η(5)-C(5)H(5), DBU = 1,8-diazabicyclo [5.4.0] undec-7-ene) react with molecular oxygen to give the corresponding oxophosphinidene complexes (H-DBU)[MCp{P(O)R*}(CO)(2)] as major products (Mo-P = 2.239(1) Å for the Mo complex). The latter anionic complexes are protonated by HBF(4)·OEt(2) to give the hydroxyphosphide derivatives [MCp{P(OH)R*}(CO)(2)]. In the presence of excess acid, the molybdenum complex yields the fluorophosphide complex [MoCp(PFR*)(CO)(2)] (Mo-P = 2.204(1) Å), while the tungsten compound reacts with excess HCl to give an unstable chlorophosphine complex [WCpCl(PHClR*)(CO)(2)] which is rapidly hydrolyzed to give [WCpCl{PH(OH)R*}(CO)(2)], having a complexed arylphosphinous acid (Mo-P = 2.460(2) Å). The molybdenum anion reacts with strong C-based electrophiles such as [Me(3)O]BF(4), Et(2)SO(4), C(2)H(3)C(O)Cl, and PhC(O)Cl to give the corresponding alkoxyphosphide derivatives [MoCp{P(OR)R*}(CO)(2)] (R = Me, Et, COC(2)H(3), COPh; Mo-P = 2.197(2) Å for the benzoyl compound), as a result of the attack of the electrophile at the O atom of the oxophosphinidene ligand. In contrast, the reactions with milder alkylating reagents such as the alkyl halides MeI, EtI, C(3)H(5)Br, and C(3)H(3)Br give selectively the corresponding κ(2)-phosphinite complexes [MoCp{κ(2)-OP(R)R*}(CO)(2)] [R = Me, Et, C(3)H(5), C(3)H(3); Mo-P = 2.3733(5) Å for the allyl compound] as a result of the attack of the electrophile at the P atom of the oxophosphinidene ligand. According to density functional theory (DFT) calculations, the oxygen atom of the phosphinidene ligand bears the highest negative charge in the molybdenum anion, while the highest occupied molecular orbital (HOMO) of this complex has substantial Mo-P π bonding character. Thus, it is concluded that the phosphinite complexes are formed under conditions of orbital control, while charge-controlled reactions tend to give alkoxyphosphide derivatives.

A thiophosphinidene complex as a vehicle in phosphinidene transmetalation: easy formation and cleavage of a P-S bond.

A method for the generation of transition metal-phosphorus multiple bonds has been developed using the reactions of a novel thiophosphinidene-bridged dimolybdenum complex with different metal carbonyls. The overall process could be considered as a transmetalation of the phosphinidene ligand involving the activation of P-S and P-Mo bonds.

Synthesis, crystal structure and heterometallic derivatives of [Mo2Cp2(μ-σ,π-CNtBu)(PPh2CH2PPh2-P)(CO)3] (tBu = C(CH3)3, Cp = η-C5H5)

Abstract The dppm ligand (Ph 2 PCH 2 PPh 2 ) in [Mo 2 Cp 2 (CO) 4 (μ-dppm)] (Cp = η-C 5 H 5 ) undergoes ring-opening upon reaction with NCMe or CN t Bu ( t Bu = C(CH 3 ) 3 ), to give [MoCp(CO)(NCMe)(dppm)][MoCp(CO) 3 ] or [Mo 2 Cp 2 (μ-σ,π-CN t Bu)(dppm-P)(CO) 3 ], respectively. The crystal structure of the latter complex is described as well as its reactions with sources of the metal fragments ML n [ML n : Fe(CO) 4 , Mo(CO) 5 , MnBr(CO) 4 , CuCl] to give the heterometallic species [ML n (μ-dppm)MoCp(CO)(μ-σ,π-CN t Bu)MoCp(CO) 2 ].

Chemistry of polynuclear metal complexes with bridging carbene or carbyne ligands. Part 88. Carbaboranetungsteniridium compounds; crystal structure of the complex [WIr(µ-CC6H4Me-4)(CO)2(PEt3)2(η5-C2B9H9Me2)]

The reaction between the compounds [Ir(PPh3)2(cod)][PF6](cod = cycle-octa-15diene) and [N(PPh3)2][W(CR)(CO)2(η5-C2B9H9Me2)](R = C6H4Me-4) in thf (tetrahydrofuran) at room temperature affords the complex [WIr(µ-CR)(CO)2(PPh3)2(η5-C6B2H9Me2)]. The triphenylphosphine groups in the latter can be displaced with PEt3, P(OPh)3, or P(OMe)3 to give the compounds [WIr(µ-CR)(CO)2L(L′)(η5-C2B9H9Me2)][L = L′= PEt3, P(OPh)3, or P(OMe)3; L = PPh3, L′= P(OMe)3]. In solution several of these products exist as isomeric mixtures. An X- ray diffraction study was carried out on an isomer of [WIr(µ-CR)(CO)2(PEt3)2(η5- C2B9H9Me2)]. The W–lr bond [2.590(1)A] is spanned by the p-tolylmethylidyne group [µ-C–W 2.06(1), µ-C–Ir 1.95 (1)A]. The nido-icosahedral fragment C2B9H7Me2 is η5-co-ordinated to the tungsten, but the central boron CCBBB in the pentagonal face of the ligand is attached to the iridium via a two-electron three-centre B–H⇀Lr bond. The tungsten atom also carries two terminal CO groups, and the two PEt3 ligands are bonded to the iridium. The co-ordination environment of the iridium is such that the plane defined by the atoms IrP2 is perpendicular to that containing the atoms W, µ-C, and B-H⇀Lr, and the midpoint of the cage C–C bond. The reaction between [WIr(µ-CR)(CO)2(PPh3)2(η5-C2B2H8Me2)] and P(OMe)3 also affords the compounds [WIrH(µ-CR)(µ-σ:η5-C2B9H8Me2)(CO)3{P(OMe)3}2] and [WIrH{µ-σ: η5-CH (R)(C2B2H7Me2)}(CO)2{P(OMe)3}4]. Similarly PMe3 displaces the PPh3 groups in the precursor to give [WIrH(µ-CR)(µ-σ:η5-C2B2H8Me2)(CO)2(PMe3)3] and [WlrH{µ-σ: η5-CH(R)(C2B9H7Me2)}(CO)2(PMe3)4]. The reactions between [IrL2(cod)][PF6](L = Ph2PCH2CH2PPh2 or 2,2′- bipyridine) and [N(PPh3)2][W(CR)(CO)2(η5-C2B9H9Me2)] yield tungsten–iridium complexes [WIrH (µ-CR)(µ-σ: η5-C2B9H8Me2)(CO)3L2] with terminal Ir–H bonds, and σ B–Lr linkages to the carbaborane group ligating the tungsten. N.m.r. data (1H, 13C-{1H}, 31P-{1H}, and 11B-{1H}) for the new compounds are reported and discussed.

Reactivity of the anionic diphosphorus complex [Mo2Cp2(μ-PCy2)(CO)2(μ-κ2:κ2-P2)]- toward ER3X electrophiles (E = C to Pb): insights into the multisite donor ability and dynamics of the P2 ligand.

The Li(+) salt of the unsaturated anion [Mo(2)Cp(2)(μ-PCy(2))(μ-CO)(2)](-) reacted with P(4) in tetrahydrofuran at room temperature to give the title complex. This fluxional anion reacted with MeI and ClCH(2)Ph to give the diphosphenyl complexes [Mo(2)Cp(2)(μ-κ(2):κ(2)-P(2)CH(2)R)(μ-PCy(2))(CO)(2)] (R = H, Ph), with the incoming electrophile being attached at the basal P atom of the Mo(2)P(2) tetrahedron via the lone electron pair (P-P-CH(3) = 122.8(1)(o)). In contrast, reactions with ClER(3) (ER(3) = GePh(3), SnPh(3), PbMe(3), PbPh(3)) gave neutral complexes [Mo(2)Cp(2)(μ-κ(2):κ(2)-P(2)ER(3))(μ-PCy(2))(CO)(2)] having the incoming electrophile attached at the basal P atom but defining an acute P-P-E angle close to 90° with elongated P-P lengths of ca. 2.20 Å. These complexes undergo an easy fluxional process involving an exchange of the ER(3) group between the P atoms that could be properly modeled through DFT calculations, and some of them displayed minor isomers in solution. Their structure could be rationalized as derived from the interaction of the electrophile with high-energy orbitals of the anion having both σ(Mo-P) and π(P-P) bonding character. Reaction with BrSiMe(3) gave instead the agostic phosphenyl complex [Mo(2)Cp(2)(μ-κ(2):κ(1),η(2)-HP(2))(μ-PCy(2))(CO)(2)], formally derived from the attachment of a proton to a basal Mo-P edge of the anion (computed length 2.810 Å) and displaying an unusually low P-H coupling of 4 Hz. A similar structure, with the agostic H atom replaced with SnH(3), was found to be a satisfactory model for the minor isomer of the tin compound and represents a third and unprecedented coordination mode of the diphosphorus ligand. The agostic complex undergoes a fluxional process involving the intermediacy of the nonagostic isomer [Mo(2)Cp(2)(μ-κ(2):κ(2)-P(2)H)(μ-PCy(2))(CO)(2)], which was computed to display a geometry comparable to the major isomers of the ER(3) compounds (P-P = 2.183 Å; P-P-H = 81.7°).