Miguel Pelaez

Efficient removal of microcystin-LR by UV-C/H2O2 in synthetic and natural water samples

The destruction of the commonly found cyanobacterial toxin, microcystin-LR (MC-LR), in surface waters by UV-C/H(2)O(2) advanced oxidation process (AOP) was studied. Experiments were carried out in a bench scale photochemical apparatus with low pressure mercury vapor germicidal lamps emitting at 253.7 nm. The degradation of MC-LR was a function of UV fluence. A 93.9% removal with an initial MC-LR concentration of 1 μM was achieved with a UV fluence of 80 mJ/cm(2) and an initial H(2)O(2) concentration of 882 μM. When increasing the concentration of MC-LR only, the UV fluence-based pseudo-first order reaction rate constant generally decreased, which was probably due to the competition between by-products and MC-LR for hydroxyl radicals. An increase in H(2)O(2) concentration led to higher removal efficiency; however, the effect of HO scavenging by H(2)O(2) became significant for high H(2)O(2) concentrations. The impact of water quality parameters, such as pH, alkalinity and the presence of natural organic matter (NOM), was also studied. Field water samples from Lake Erie, Michigan and St. Johns River, Florida were employed to evaluate the potential application of this process for the degradation of MC-LR. Results showed that the presence of both alkalinity (as 89.6-117.8 mg CaCO(3)/L) and NOM (as ∼2 to ∼9.5 mg/L TOC) contributed to a significant decrease in the destruction rate of MC-LR. However, a final concentration of MC-LR bellow the guideline value of 1 μg/L was still achievable under current experimental conditions when an initial MC-LR concentration of 2.5 μg/L was spiked into those real water samples.

Photoinactivation of Escherichia coli by sulfur-doped and nitrogen-fluorine-codoped TiO2 nanoparticles under solar simulated light and visible light irradiation.

Titanium dioxide (TiO2) is one of the most widely used photocatalysts for the degradation of organic contaminants in water and air. Visible light (VL) activated sulfur-doped TiO2 (S-TiO2) and nitrogen-fluorine-codoped TiO2 (N-F-TiO2) were synthesized by sol-gel methods and characterized. Their photoinactivation performance was tested against Escherichia coli under solar simulated light (SSL) and VL irradiation with comparison to commercially available TiO2. Undoped Degussa-Evonik P-25 (P-25) and Sigma-TiO2 showed the highest photocatalytic activity toward E. coli inactivation under SSL irradiation, while S-TiO2 showed a moderate toxicity. After VL irradiation, Sigma-TiO2 showed higher photoinactivation, whereas S-TiO2 and P-25 showed moderate toxicity. Oxidative stress to E. coli occurred via formation of hydroxyl radicals leading to lipid peroxidation as the primary mechanism of bacterial inactivation. Various other biological models, including human keratinocytes (HaCaT), zebrafish liver cells (ZFL), and zebrafish embryos were also used to study the toxicity of TiO2 NPs. In conclusion, N-F-TiO2 did not show any toxicity based on the assay results from all the biological models used in this study, whereas S-TiO2 was toxic to zebrafish embryos under all the test conditions. These findings also demonstrate that the tested TiO2 nanoparticles do not show any adverse effects in HaCaT and ZFL cells.

Synthesis, characterization and photocatalytic evaluation of visible light activated C-doped TiO2 nanoparticles

We have demonstrated heterogeneous photocatalytic degradation of microcystin-LR (MC-LR) by visible light activated carbon doped TiO(2) (C-TiO(2)) nanoparticles, synthesized by a modified sol-gel route based on the self-assembly technique exploiting oleic acid as a pore directing agent and carbon source. The C-TiO(2) nanoparticles crystallize in anatase phase despite the low calcination temperature of 350 °C and exhibit a highly porous structure that can be optimized by tuning the concentration of the oleic acid surfactant. The carbon modified nanomaterials exhibited enhanced absorption in the broad visible light region together with an apparent red shift in the optical absorption edge by 0.5 eV (2.69 eV), compared to the 3.18 eV of reference anatase TiO(2). Carbon species were identified by x-ray photoelectron spectroscopy analysis through the formation of both Ti-C and C-O bonds, indicative of substitution of carbon for oxygen atoms and the formation of carbonates, respectively. Electron paramagnetic resonance spectroscopy revealed the formation of two carbon related paramagnetic centers in C-TiO(2), whose intensity was markedly enhanced under visible light illumination, pointing to the formation of localized states within the anatase band gap, following carbon doping. The photocatalytic activity of C-TiO(2) nanomaterials was evaluated for the degradation of MC-LR at pH 3.0 under visible light (λ > 420 nm) irradiation. The doped materials showed a higher MC-LR degradation rate than reference TiO(2), behavior that is attributed to the incorporation of carbon into the titania lattice.

Can We Effectively Degrade Microcystins? - Implications on Human Health

Microcystins are cyclic heptapeptide toxins produced by a number of genera of cyanobacteria. They are ubiquitous in bodies of water worldwide and pose significant hazard to human, plant, and animal health. Microcystins are primarily hepatotoxins known to inhibit serine-threonine phosphatases leading to the disruption of cascade of events important in the regulation and control of cellular processes. Covalent binding of microcystins with phosphatases is thought to be responsible for the cytotoxic and genotoxic effects of microcystins. In addition, microcystins can trigger oxidative stress in cells resulting in necrosis or apoptosis. Their cyclic structure and novel amino acids enhance their stability and persistence in the environment. Humans are primarily exposed to microcystins via drinking water consumption and accidental ingestion of recreational water. Recreational exposure by skin contact or inhalation to microcystins is now recognized to cause a wide range of acute illnesses which can be life-threatening. Microcystins are primarily degraded by microorganisms in the environment, while sunlight can cause the isomerization of the double bonds and hydroxylation in the presence of pigments. Attempts to utilize these organisms in sand and membrane filters to treat water contaminated with microcystins showed complete removal and detoxification. Conventional water treatment processes may not fully eliminate microcystins when there are high levels of organic compounds especially during harmful bloom events. Combination of conventional and advanced oxidation technologies can potentially remove 100% of microcystins in water even in turbid conditions. This review covers selected treatment technologies to degrade microcystins in water.

NF-TiO2 photocatalysis of amitrole and atrazine with addition of oxidants under simulated solar light: Emerging synergies, degradation intermediates, and reusable attributes

In order to investigate sustainable alternatives to current water treatment methods, the effect of NF-titania film thickness and subsequent photocatalysis in combination with oxidants was examined under simulated solar light. Such a combination presents a theoretical possibility for a synergistic interaction between the photocatalyst and the oxidant (activation of the oxidant by the catalyst under conditions under which it may not conventionally be activated). To investigate, peroxymonosulfate (PMS) and persulfate (PS) were used as oxidants, and two pesticides, amitrole and atrazine, were used as target contaminants. In the absence of a film, activation of PMS under simulated solar conditions is demonstrated by removal of atrazine, whereas PS provided minimal removal, suggesting inefficient activation. Combining photocatalytic films with PMS and PS manifested synergies for both oxidants. The effect was most pronounced for PS since PMS already underwent significant activation without the photocatalyst. Amitrole degradation results indicated a lack of removal of amitrole by activated PS alone, suggesting that this sulfate radical-based treatment technology may be ineffective for the removal of amitrole. The NF-TiO₂ films demonstrated reusability under solar light both with and without oxidants. Finally, the degradation intermediates were analyzed, and a new intermediate appeared upon incorporating oxidants into the system.

Photocatalytic degradation and mineralization of microcystin-LR under UV-A, solar and visible light using nanostructured nitrogen doped TiO2.

In an attempt to face serious environmental hazards, the degradation of microcystin-LR (MC-LR), one of the most common and more toxic water soluble cyanotoxin compounds released by cyanobacteria blooms, was investigated using nitrogen doped TiO(2) (N-TiO(2)) photocatalyst, under UV-A, solar and visible light. Commercial Degussa P25 TiO(2), Kronos and reference TiO(2) nanopowders were used for comparison. It was found that under UV-A irradiation, all photocatalysts were effective in toxin elimination. The higher MC-LR degradation (99%) was observed with Degussa P25 TiO(2) followed by N-TiO(2) with 96% toxin destruction after 20 min of illumination. Under solar light illumination, N-TiO(2) nanocatalyst exhibits similar photocatalytic activity with that of commercially available materials such as Degussa P25 and Kronos TiO(2) for the destruction of MC-LR. Upon irradiation with visible light Degussa P25 practically did not show any response, while the N-TiO(2) displayed remarkable photocatalytic efficiency. In addition, it has been shown that photodegradation products did not present any significant protein phosphatase inhibition activity, proving that toxicity is proportional only to the remaining MC-LR in solution. Finally, total organic carbon (TOC) and inorganic ions (NO(2)(-), NO(3)(-) and NH(4)(+)) determinations confirmed that complete photocatalytic mineralization of MC-LR was achieved under both UV-A and solar light.

Use of selected scavengers for the determination of NF-TiO2 reactive oxygen species during the degradation of microcystin-LR under visible light irradiation

Although UV-induced TiO2 photocatalysis involves the generation of several reactive oxygen species (ROS), the formation of hydroxyl radicals are generally associated with the degradation of persistent organic contaminants in water. In this study, a variety of radical scavengers were employed to discriminate the roles of different ROS during visible light activated (VLA) photocatalysis using nitrogen and fluorine doped TiO2 (NF-TiO2) in the degradation of the hepatotoxin, microcystin-LR (MC-LR) in water. The addition of hydroxyl radical scavengers, methanol and tert-butyl alcohol to the reaction mixture resulted in negligible inhibition of VLA NF-TiO2 photocatalytic degradation of MCLR at pH 3.0 and only partial inhibition at pH 5.7. While hydroxyl radicals generally play the primary role in UV TiO2 photocatalysis, the minimal influence of MeOH and t-BuOH on the degradation process under these experimental conditions indicates hydroxyl radicals (•OH) do not play the primary role in VLA NF-TiO2 photocatalysis. However, strong inhibition was observed in VLA NF-TiO2 photocatalytic degradation of MC-LR in the presence of superoxide dismutase, benzoquinone and catalase at pH 3.0 and 5.7 indicating O2•- and H2O2 play critical roles in the degradation process. Similar degradation rates were observed in the presence of singlet oxygen scavenger, deuterium oxide, which enhances singlet oxygen mediated processes further suggesting singlet oxygen does not play a key role in the degradation of MCLR in these system. Formic acid and cupric nitrate were added to probe the roles of the valence band holes and conduction band electrons, respectively. Under UV+vis light irradiation, almost complete inhibition of MC-LR removal is observed with NF-TiO2 in the presence of •OH scavengers at pH 5.7. These results demonstrate that solution pH plays a major role in the formation and reactivities of ROS during VLA NF-TiO2 photocatalysis. The adsorption strength of the scavengers and MCLR onto NF-TiO2 as well as the speciation of the ROS as a function of pH need to be carefully considered since they also play a key role in the efficiency of the process. These results indicate the reduction of molecular oxygen by photo-generated electrons rather than hydroxyl radicals produced by oxidative reactions of photo-generated holes play a key role in the of VLA NF-TiO2 photocatalytic degradation of MC-LR.

Sources and Occurrence of Cyanotoxins Worldwide

The eutrophication of water resources, mainly attributed to antrophogenic activities such as sewage and agricultural runoffs, has led to a worldwide increase in the formation of cyanobacterial harmful algal blooms (Cyano-HABs). Cyano-HABs have the ability to produce and release toxic compounds, commonly known as cyanotoxins, which comprise a potent threat for human and animal health as well as negative economical impacts. This chapter presents an overview on the sources and occurrence of species of cyanobacteria and their association with the production of cyanotoxins throughout the world. The main bloom-forming cyanobacteria that have been detected include Microcystis, Cylindrospermopsis, Anabaena, Aphanizomenon, and Planktothrix. The main cyanotoxins related to these cyanobacteria are microcystins, cylindrospermopsin, anatoxin-a and saxitoxins.

Photocatalytic cellulosic electrospun fibers for the degradation of potent cyanobacteria toxin microcystin-LR

Non-woven, high surface area photocatalytic cellulosic electrospun fibers were fabricated for solar-light-driven water treatment purposes and tested for photocatalytic decomposition of the potent cyanobacteria toxin microcystin-LR (MC-LR). Electrospun fibers of cellulose acetate were converted to succinylated cellulose and then loaded with titania nanoparticles using a simple solution based technique. It was found that the type of titania nanoparticle (visible light activated or UV light activated), the surface area of the fiber mat, and loading solution pH all have an effect on the distribution of titania along the fibers. The titania coverage and surface area of the fiber mats were found to correlate well with the degree of MC-LR degradation under both visible and solar light irradiation. The difference in titania coverage, determined using X-ray photoelectron microscopy (XPS), was two to three times smaller in the lower surface area samples. These photocatalytic electrospun fibers could be advantageously used for drinking water and wastewater treatment applications using solar light as a renewable source of energy.

CHAPTER 5:The Green Synthesis and Environmental Applications of Nanomaterials

This chapter summarizes the use of green chemistry on the synthesis of nanomaterials as well as their environmental applications. Green routes for the synthesis of nanomaterials are discussed, including those using nontoxic solvents and natural template materials, such as ionic liquid, leaf and tea extract, natural cellulose, sucrose, starch, and plant leaves. Such methods could decrease the use of hazardous chemicals in chemical processes and reduce or eliminate undesirable products during the synthesis process. The employment of micro-organisms for the green synthesis of nanoparticles is also described. In addition, the use of nanomaterials as photocatalysts, Fentons catalysts, and disinfectants is reported for environmental remediation including the degradation of organic contaminants and the inactivation of pathogenic micro-organisms in water. Finally, the importance of immobilization of nanomaterials onto substrates for their sustainable application to environmental remediation, in particular, contaminated water and wastewater treatment is presented.