Mihail Ion Lepsa

Hall effect measurements on InAs nanowires

We have processed Hall contacts on InAs nanowires grown by molecular beam epitaxy using an electron beam lithography process with an extremely high alignment accuracy. The carrier concentrations determined from the Hall effect measurements on these nanowires are lower by a factor of about 4 in comparison with those measured by the common field-effect technique. The results are used to evaluate quantitatively the charging effect of the interface and surface states.

Molecular beam epitaxy growth of GaAs/InAs core-shell nanowires and fabrication of InAs nanotubes.

We present results about the growth of GaAs/InAs core-shell nanowires (NWs) using molecular beam epitaxy. The core is grown via the Ga droplet-assisted growth mechanism. For a homogeneous growth of the InAs shell, the As(4) flux and substrate temperature are critical. The shell growth starts with InAs islands along the NW core, which increase in time and merge giving finally a continuous and smooth layer. At the top of the NWs, a small part of the core is free of InAs indicating a crystal phase selective growth. This allows a precise measurement of the shell thickness and the fabrication of InAs nanotubes by selective etching. The strain relaxation in the shell occurs mainly via the formation of misfit dislocations and saturates at ~80%. Additionally, other types of defects are observed, namely stacking faults transferred from the core or formed in the shell, and threading dislocations.

Electronic Phase Coherence in InAs Nanowires

Magnetotransport measurements at low temperatures have been performed on InAs nanowires grown by In-assisted molecular beam epitaxy. Information on the electron phase coherence is obtained from universal conductance fluctuations measured in a perpendicular magnetic field. By analysis of the universal conductance fluctuations pattern of a series of nanowires of different length, the phase-coherence length could be determined quantitatively. Furthermore, indications of a pronounced flux cancelation effect were found, which is attributed to the topology of the nanowire. Additionally, we present measurements in a parallel configuration between wire and magnetic field. In contrast to previous results on InN and InAs nanowires, we do not find periodic oscillations of the magnetoconductance in this configuration. An explanation of this behavior is suggested in terms of the high density of stacking faults present in our InAs wires.

Self-catalyzed VLS grown InAs nanowires with twinning superlattices.

We report on the self-catalyzed growth of InAs nanowires by molecular beam epitaxy on GaAs substrates covered by a thin silicon oxide layer. Clear evidence is presented to demonstrate that, under our experimental conditions, the growth takes place by the vapor-liquid-solid (VLS) mechanism via an In droplet. The nanowire growth rate is controlled by the arsenic pressure while the diameter depends mainly on the In rate. The contact angle of the In droplet is smaller than that of the Ga droplet involved in the growth of GaAs nanowires, resulting in much lower growth rates. The crystal structure of the VLS grown InAs nanowires is zinc blende with regularly spaced rotational twins forming a twinning superlattice.

Realization of nanoscaled tubular conductors by means of GaAs/InAs core/shell nanowires

We investigated the transport properties of GaAs/InAs core/shell nanowires grown by molecular beam epitaxy. Owing to the band alignment between GaAs and InAs, electrons are accumulated in the InAs shell as long as the shell thickness exceeds 12 nm. By performing simulations using a Schrödinger-Poisson solver, it is confirmed that confined states are present in the InAs shell, which are depleted if the shell thickness is below a threshold value. The existence of a tubular-shaped conductor is proved by performing magnetoconductance measurements at low temperatures. Here, flux periodic conductance oscillations are observed which can be attributed to transport in one-dimensional channels based on angular momentum states.

Axial strain in GaAs/InAs core-shell nanowires

We study the axial strain relaxation in GaAs/InAs core-shell nanowire heterostructures grown by molecular beam epitaxy. Besides a gradual strain relaxation of the shell material, we find a significant strain in the GaAs core, increasing with shell thickness. This strain is explained by a saturation of the dislocation density at the core-shell interface. Independent measurements of core and shell lattice parameters by x-ray diffraction reveal a relaxation of 93% in a 35 nm thick InAs shell surrounding cores of 80 nm diameter. The compressive strain of −0.5% compared to bulk InAs is accompanied by a tensile strain up to 0.9% in the GaAs core.

Nanoscale charge transport measurements using a double-tip scanning tunneling microscope

We demonstrate the ability of a double-tip scanning tunneling microscope (STM) combined with a scanning electron microscope (SEM) to perform charge transport measurements on the nanoscale. The STM tips serve as electric probes that can be precisely positioned relative to the surface nanostructures using the SEM control and the height reference provided by the tunneling contact. The tips work in contact, noncontact, and tunneling modes. We present vertical transport measurements on nanosized GaAs/AlAs resonant tunneling diodes and lateral transport measurements on the conductive surface of 7×7 reconstructed Si(111). The high stability of the double-tip STM allows nondestructive electrical contacts to surfaces via the tunneling gaps. We performed two-point electrical measurements via tunneling contacts on the Si(111)(7×7) surface and evaluated them using a model for the charge transport on this surface.

Spin dynamics triggered by subterahertz magnetic field pulses

Current pulses of up to 20 A and as short as 3 ps are generated by a low-temperature-grown GaAs photoconductive switch and guided through a coplanar waveguide, resulting in a 0.6 T subterahertz magnetic field pulse. The pulse length is directly calibrated using photocurrent autocorrelation. Magnetic excitations in Fe microstructures are studied by time-resolved Kerr spectroscopy. An ultrafast response time (within less than 10 ps of the magnetization) to the subterahertz electromagnetic field pulse is shown.

Fabrication and Characterisation of GaAs Gunn Diode Chips for Applications at 77 GHz in Automotive Industry

GaAs-based Gunn diodes with graded AlGaAs hot electron injector heterostructures have been developed under the special needs in automotive applications. The fabrication of the Gunn diode chips was based on total substrate removal and processing of integrated Au heat sinks. Especially, the thermal and RF behavior of the diodes have been analyzed by DC, impedance and S-parameter measurements. The electrical investigations have revealed the functionality of the hot electron injector. An optimized layer structure could fulfill the requirements in adaptive cruise control (ACC) systems at 77 GHz with typical output power between 50 and 90 mW.

Electric field-driven coherent spin reorientation of optically generated electron spin packets in InGaAs.

Full electric-field control of spin orientations is one of the key tasks in semiconductor spintronics. We demonstrate that electric-field pulses can be utilized for phase-coherent ±π spin rotation of optically generated electron spin packets in InGaAs epilayers detected by time-resolved Faraday rotation. Through spin-orbit interaction, the electric-field pulses act as local magnetic field pulses. By the temporal control of the local magnetic field pulses, we can turn on and off electron spin precession and thereby rotate the spin direction into arbitrary orientations in a two-dimensional plane. Furthermore, we demonstrate a spin-echo-type spin drift experiment and find an unexpected partial spin rephasing, which is evident by a doubling of the spin dephasing time.