Mijia Zhu

Effect of natural and synthetic surfactants on crude oil biodegradation by indigenous strains

Hydrocarbon pollution is a worldwide problem. In this study, five surfactants containing SDS, LAS, Brij 30, Tween 80 and biosurfactant were used to evaluate their effect on crude oil biodegradation. Hydrocarbon degrading bacteria were isolated from oil production water. The biosurfactant used was a kind of cyclic lipopeptide produced by Bacillus subtilis strain WU-3. Solubilization test showed all the surfactants could apparently increase the water solubility of crude oil. The microbial adhesion to the hydrocarbon (MATH) test showed surfactants could change cell surface hydrophobicity (CSH) of microbiota, depending on their species and concentrations. Microcalorimetric experiments revealed these surfactants exhibited toxicity to microorganisms at high concentrations (above 1 CMC), except for SDS which showed low antibacterial activity. Surfactant supplementation (about 0.1 and 0.2 CMC) could improve degradation rate of crude oil slightly, while high surfactant concentration (above 1 CMC) may decrease the degradation rate from 50.5% to 28.9%. Those findings of this work could provide guidance for the application of surfactants in bioremediation of oil pollution.

Adsorption of naphthalene from aqueous solution onto fatty acid modified walnut shells

The removal of polycyclic aromatic hydrocarbons (PAHs) from aqueous solution is challenging to environmental technologists. Agricultural waste is apparently the most attractive materials in removing PAHs because of its abundance, renewability, and economic advantage. The adsorption of PAHs (e.g., naphthalene) onto walnut shell (WNS) and its fatty acid (e.g., capric acid, lauric acid, palmitic acid, and oleic acid)-modified equivalent were investigated in this work to develop low-cost biosorbents for hydrophobic organic compounds. Compared with other modified sorbents, oleic acid graftted walnut shell (OWNS) showed the maximum partition coefficient (4330 ± 8.8 L kg(-1)) because of its lowest polarity and highest aromaticity. The adsorption capacity (7210 μg g(-1)) of OWNS at the temperature of 298 K was observed for an initial naphthalene concentration of 25 mg L(-1) with contact time of 40 h, sorbent dosage of 1 g L(-1), and in neutral condition. Furthermore, the regeneration capability of OWNS implied that it was a promising biosorbent for naphthalene removal.

Acid-hydrolyzed agricultural residue: A potential adsorbent for the decontamination of naphthalene from water bodies

Development and application of low-cost and effective adsorbents to remove polycyclic aromatic hydrocarbons from effluents has become a research focus in recent years. We selected reed stem, ginkgo nut shell and hazelnut shell as adsorbents, and used acid hydrolysis as a simple modification technology. The adsorption isotherms of naphthalene to raw and modified adsorbents were controlled by partitioning. The adsorption capability of the hydrolysed hazelnut shell was notably enhanced at a higher level compared with that of other adsorbents. Results showed that the adsorption capacity (17250.42 μg/g) of modified hazelnut shell was observed for an initial naphthalene concentration of 25mg/L, with a contact time of 72 h, adsorbent dosage of 1 g/L and initial pH of 7.0. Furthermore, the regeneration capability of hydrolyzed hazelnut shell indicated that it was a promising adsorbent for naphthalene removal in wastewater treatment.

Uranium biosorption from aqueous solution by the submerged aquatic plant Hydrilla verticillata

The biosorption characteristics of U(VI) from aqueous solution onto a nonliving aquatic macrophyte, Hydrilla verticillata (dry powder), were investigated under various experimental conditions by using batch methods. Results showed that the adsorption reached equilibrium within 60 min and the experimental data were well fitted by the pseudo-first-order kinetic model. U(VI) adsorption was strongly pH dependent, and the optimum pH for U(VI) removal was 5.5. Isotherm adsorption data displayed good correlation with the Langmuir model, with a maximum monolayer adsorption capacity of 171.52 mg/g. Thermodynamic studies suggested that U(VI) adsorption onto H. verticillata was an exothermic and spontaneous process in nature. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy indicated that the amino and hydroxyl groups on the algal surface played an important role in U(VI) adsorption. The mechanisms responsible for U(VI) adsorption could involve electrostatic attraction and ion exchange. In conclusion, H. verticillata biomass showed good potential as an adsorption material for the removal of uranium contaminants in aqueous solution.

Response surface methodology approach for the optimisation of adsorption of hydrolysed polyacrylamide from polymer-flooding wastewater onto steel slag: a good option of waste mitigation

Wastewater produced from polymer flooding in oil production features high viscosity and chemical oxygen demand because of the residue of high-concentration polymer hydrolysed polyacrylamide (HPAM). In this study, steel slag, a waste from steel manufacturing, was studied as a low-cost adsorbent for HPAM in wastewater. Optimisation of HPAM adsorption by steel slag was performed with a central composite design under response surface methodology (RSM). Results showed that the maximum removal efficiency of 89.31% was obtained at an adsorbent dosage of 105.2 g/L, contact time of 95.4 min and pH of 5.6. These data were strongly correlated with the experimental values of the RSM model. Single and interactive effect analysis showed that HPAM removal efficiency increased with increasing adsorbent dosage and contact time. Efficiency increased when pH was increased from 2.6 to 5.6 and subsequently decreased from 5.6 to 9.3. It was observed that removal efficiency significantly increased (from 0% to 86.1%) at the initial stage (from 0 min to 60 min) and increased gradually after 60 min with an adsorbent dosage of 105.2 g/L, pH of 5.6. The adsorption kinetics was well correlated with the pseudo-second-order equation. Removal of HPAM from the studied water samples indicated that steel slag can be utilised for the pre-treatment of polymer-flooding wastewater.