Mikhail M. Shneider

PAAR-repeat proteins sharpen and diversify the type VI secretion system spike.

The bacterial type VI secretion system (T6SS) is a large multicomponent, dynamic macromolecular machine that has an important role in the ecology of many Gram-negative bacteria. T6SS is responsible for translocation of a wide range of toxic effector molecules, allowing predatory cells to kill both prokaryotic as well as eukaryotic prey cells. The T6SS organelle is functionally analogous to contractile tails of bacteriophages and is thought to attack cells by initially penetrating them with a trimeric protein complex called the VgrG spike. Neither the exact protein composition of the T6SS organelle nor the mechanisms of effector selection and delivery are known. Here we report that proteins from the PAAR (proline-alanine-alanine-arginine) repeat superfamily form a sharp conical extension on the VgrG spike, which is further involved in attaching effector domains to the spike. The crystal structures of two PAAR-repeat proteins bound to VgrG-like partners show that these proteins sharpen the tip of the T6SS spike complex. We demonstrate that PAAR proteins are essential for T6SS-mediated secretion and target cell killing by Vibrio cholerae and Acinetobacter baylyi. Our results indicate a new model of the T6SS organelle in which the VgrG–PAAR spike complex is decorated with multiple effectors that are delivered simultaneously into target cells in a single contraction-driven translocation event.

The tail sheath structure of bacteriophage T4: a molecular machine for infecting bacteria

The contractile tail of bacteriophage T4 is a molecular machine that facilitates very high viral infection efficiency. Its major component is a tail sheath, which contracts during infection to less than half of its initial length. The sheath consists of 138 copies of the tail sheath protein, gene product (gp) 18, which surrounds the central non‐contractile tail tube. The contraction of the sheath drives the tail tube through the outer membrane, creating a channel for the viral genome delivery. A crystal structure of about three quarters of gp18 has been determined and was fitted into cryo‐electron microscopy reconstructions of the tail sheath before and after contraction. It was shown that during contraction, gp18 subunits slide over each other with no apparent change in their structure.

Structure of the T4 baseplate and its function in triggering sheath contraction.

Several systems, including contractile tail bacteriophages, the type VI secretion system and R-type pyocins, use a multiprotein tubular apparatus to attach to and penetrate host cell membranes. This macromolecular machine resembles a stretched, coiled spring (or sheath) wound around a rigid tube with a spike-shaped protein at its tip. A baseplate structure, which is arguably the most complex part of this assembly, relays the contraction signal to the sheath. Here we present the atomic structure of the approximately 6-megadalton bacteriophage T4 baseplate in its pre- and post-host attachment states and explain the events that lead to sheath contraction in atomic detail. We establish the identity and function of a minimal set of components that is conserved in all contractile injection systems and show that the triggering mechanism is universally conserved.

Structure of the bacteriophage phi KZ lytic transglycosylase gp144.

Lytic transglycosylases are enzymes that act on the peptidoglycan of bacterial cell walls. They cleave the glycosidic linkage between N-acetylmuramoyl and N-acetylglucosaminyl residues with the concomitant formation of a 1,6-anhydromuramoyl product. The x-ray structure of the lytic transglycosylase gp144 from the Pseudomonas bacteriophage φKZ has been determined to 2.5-Å resolution. This protein is probably employed by the bacteriophage in the late stage of the virus reproduction cycle to destroy the bacterial cell wall to release the phage progeny. φKZ gp144 is a 260-residue α-helical protein composed of a 70-residue N-terminal cell wall-binding domain and a C-terminal catalytic domain. The fold of the N-terminal domain is similar to the peptidoglycan-binding domain from Streptomyces albus G d-Ala-d-Ala carboxypeptidase and to the N-terminal prodomain of human metalloproteinases that act on extracellular matrices. The C-terminal catalytic domain of gp144 has a structural similarity to the catalytic domain of the transglycosylase Slt70 from Escherichia coli and to lysozymes. The gp144 catalytic domain has an elongated groove that can bind at least five sugar residues at sites A-E. As in other lysozymes, the peptidoglycan cleavage (catalyzed by Glu115 in gp144) occurs between sugar-binding subsites D and E. The x-ray structure of the φKZ transglycosylase complexed with the chitotetraose (N-acetylglucosamine)4 has been determined to 2.6-Å resolution. The N-acetylglucosamine residues of the chitotetraose bind in sites A-D.

Structure and location of gene product 8 in the bacteriophage T4 baseplate

Many bacteriophages, such as T4, T7, RB49, and phi29, have complex, sometimes multilayered, tails that facilitate an almost 100% success rate for the viral particles to infect host cells. In bacteriophage T4, there is a baseplate, which is a multiprotein assembly, at the distal end of the contractile tail. The baseplate communicates to the tail that the phage fibers have attached to the host cell, thereby initiating the infection process. Gene product 8 (gp8), whose amino acid sequence consists of 334 residues, is one of at least 16 different structural proteins that constitute the T4 baseplate and is the sixth baseplate protein whose structure has been determined. A 2.0A resolution X-ray structure of gp8 shows that the two-domain protein forms a dimer, in which each monomer consists of a three-layered beta-sandwich with two loops, each containing an alpha-helix at the opposite sides of the sandwich. The crystals of gp8 were produced in the presence of concentrated chloride and bromide ions, resulting in at least 11 halide-binding sites per monomer. Five halide sites, situated at the N termini of alpha-helices, have a protein environment observed in other halide-containing protein crystal structures. The computer programs EMfit and SITUS were used to determine the positions of six gp8 dimers within the 12A resolution cryo-electron microscopy image reconstruction of the baseplate-tail tube complex. The gp8 dimers were found to be located in the upper part of the baseplate outer rim. About 20% of the gp8 surface is involved in contacts with other baseplate proteins, presumed to be gp6, gp7, and gp10. With the structure determination of gp8, a total of 53% of the volume of the baseplate has now been interpreted in terms of its atomic structure.

Molecular architecture of bacteriophage T4

In studying bacteriophage T4—one of the basic models of molecular biology for several decades—there has come a Renaissance, and this virus is now actively used as object of structural biology. The structures of six proteins of the phage particle have recently been determined at atomic resolution by X-ray crystallography. Three-dimensional reconstruction of the infection device—one of the most complex multiprotein components—has been developed on the basis of cryo-electron microscopy images. The further study of bacteriophage T4 structure will allow a better understanding of the regulation of protein folding, assembly of biological structures, and also mechanisms of functioning of the complex biological molecular machines.

Structure of the capsular polysaccharide of Acinetobacter baumannii ACICU containing di-N-acetylpseudaminic acid

Capsular polysaccharide was isolated by the phenol-water extraction of Acinetobacter baumannii ACICU cells and studied by sugar analysis, partial acid hydrolysis, and 1D and 2D (1)H and (13)C NMR spectroscopy. The polysaccharide was found to contain 5,7-diacetamido-3,5,7,9-tetradeoxy-l-glycero-l-manno-non-2-ulosonic or di-N-acetylpseudaminic acid (Pse5Ac7Ac), and the following structure of the branched tetrasaccharide repeating unit was established: The genes present in the polysaccharide gene cluster of A. baumannii ACICU are appropriate to the structure established.

Listeria phage A511, a model for the contractile tail machineries of SPO1-related bacteriophages

Recognition of the bacterial host and attachment to its surface are two critical steps in phage infection. Here we report the identification of Gp108 as the host receptor‐binding protein of the broad host‐range, virulent Listeria phage A511. The ligands for Gp108 were found to be N‐acetylglucosamine and rhamnose substituents of the wall teichoic acids of the bacterial cell wall. Transmission electron microscopy and immunogold‐labelling allowed us to create a model of the A511 baseplate in which Gp108 forms emanating short tail fibres. Data obtained for related phages, such as Staphylococcus phages ISP and Twort, demonstrate the evolutionary conservation of baseplate components and receptor‐binding proteins within the Spounavirinae subfamily, and contractile tail machineries in general. Our data reveal key elements in the infection process of large phages infecting Gram‐positive bacteria and generate insights into the complex adsorption process of phage A511 to its bacterial host.

Structure elucidation of the capsular polysaccharide of Acinetobacter baumannii AB5075 having the KL25 capsule biosynthesis locus

Capsular polysaccharide was isolated by the phenol-water extraction of Acinetobacter baumannii AB5075 and studied by 1D and 2D (1)H and (13)C NMR spectroscopy. The following structure of the linear trisaccharide repeating unit was established: → 3)-β-D-ManpNAcA-(1 → 4)-β-D-ManpNAcA-(1 → 3)-α-D-QuipNAc4NR-(1 → where R indicates (S)-3-hydroxybutanoyl or acetyl in the ratio ∼ 2.5:1. The genes in the polysaccharide biosynthesis locus designated KL25 are appropriate to the established CPS structure.

Structure of Bacteriophage T4 Fibritin M: a Troublesome Packing Arrangement

Fibritin, a 52 kDa product of bacteriophage T4 gene wac, forms 530 A long fibers, named whiskers, that attach to the phage neck and perform a helper function during phage assembly. Fibritin is a homotrimer, with its predominant central domain consisting of 12 consecutive alpha-helical coiled-coil segments linked together by loops. The central domain is flanked by small globular domains at both ends. Fibritin M is a genetically engineered fragment of the wild type and contains 74 amino-acid residues corresponding to the last coiled-coil segment and the complete carboxy-terminal domain. The crystals of fibritin M belong to the rare space group P3 with three crystallographically independent trimers in the unit cell. The structure has been established at 1.85 A resolution by combining molecular and isomorphous replacement techniques. One of the two heavy-atom derivatives used was gaseous xenon. A substantial fraction of residues in each independent trimer is disordered to various extents in proportion to the lack of restraints on the molecules provided by the lattice contacts. Accurate modeling of the solvent present in the crystals was crucial for achieving good agreement with experimental data.