Mikihiko Miura

Structural characteristics and properties of Bombyx mori silk fiber obtained by different artificial forcibly silking speeds

To study the spinning condition of natural biopolymer silk, the silk fibers were directly acquired from Bombyx mori silkworm, N140 x C140 by a simple artificial forcibly silking method at the speed of 60, 120, 180 and 240 cm min(-1), respectively and its microstructure and physical properties were evaluated. The fine silk fibers (about 8 microm) were obtained at faster spinning speed, 240 cm min(-1). The tensile properties of silk fibers were remarkably increased with raising the forcibly spinning speeds. The beta-sheet structure contents of silk fibers obtained at higher speed were considerably increased. The fibers obtained by different spinning speeds exhibited a fairly similar X-ray crystallinity, while the degree of molecular orientation increased with decreasing the fiber diameter. The fine silk fibers obtained at higher speed (240 cm min(-1)) exhibited a slightly higher thermal stability, as shown by the upward shift of differential scanning calorimetry (DSC) decomposition temperature.

Production of silk sericin/silk fibroin blend nanofibers

Silk sericin (SS)/silk fibroin (SF) blend nanofibers have been produced by electrospinning in a binary SS/SF trifluoroacetic acid (TFA) solution system, which was prepared by mixing 20 wt.% SS TFA solution and 10 wt.% SF TFA solution to give different compositions. The diameters of the SS/SF nanofibers ranged from 33 to 837 nm, and they showed a round cross section. The surface of the SS/SF nanofibers was smooth, and the fibers possessed a bead-free structure. The average diameters of the SS/SF (75/25, 50/50, and 25/75) blend nanofibers were much thicker than that of SS and SF nanofibers. The SS/SF (100/0, 75/25, and 50/50) blend nanofibers were easily dissolved in water, while the SS/SF (25/75 and 0/100) blend nanofibers could not be completely dissolved in water. The SS/SF blend nanofibers could not be completely dissolved in methanol. The SS/SF blend nanofibers were characterized by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry, and differential thermal analysis. FTIR showed that the SS/SF blend nanofibers possessed a random coil conformation and ß-sheet structure.

Cocoon Spinning Behavior in the Silkworm, Bombyx mori : Comparison of Three Strains Constructing Different Cocoons in Shape

Abstract The spinning behavior of the silkworm, Bombyx mori, was recorded on videotapes from two angles and analysed by three dimentional computer graphics using the Japanese (J. 124), Chinese (C.124) and their hybrid (J.124 × C.124) strains. These strains constructed typical peanut-shaped, spherical and ellipsoidal cocoons, respectively. Linear representation of the spinning posture revealed that larvae fixed the posterior half of the larval body (6th to 13th segment) and spun silk moving their anterior half (1st to 5th segment) for the most spinning period in all strains used. Little difference was observed in the average spinning speed among them. The Japanese strain spun primarily in a S-letter posture and changed its direction frequently. The larva of Chinese strain often assumed a C-letter posture and showed directionchanging behavior with comparatively lower frequency. The hybrid larva threw the head back largely in an U-letter shape during most of the spinning period and showed cocoon expansion behaviors most frequently. The cocoon expansion behavior occurred mainly at both ends of the peanut-shaped cocoon (J.124), at the center part of the spherical cocoon (C.124) and at both shoulders in the ellipsoidal cocoon of the hybrid strain. Thus, there exist strain-specific features in the spinning behavior, and it is suggested that the main behavioral factors affecting cocoon shape formation are the spinning posture and the cocoon expansion behavior during spinning.

Surface Morphology and Properties of Bombyx mori Silk Fibroin Fiber Treated with I-2-KI Aqueous Solution

The surface morphology, thermal and mechanical properties of Bombyx mori silk fibroin (SF) fiber treated with a 1.23 N iodine-potassium iodide (I2-KI) aqueous solution were investigated using scanning electron microscopy (SEM), atomic force microscopy (AFM), differential scanning calorimetry, thermogravimetric analysis, and tensile measurements to clarify the effects of the iodine treatment. SEM and AFM analyses indicated that the SF fiber surface became rougher by the absorption of polyiodide ions. The mechanical properties of iodinated SF showed an increase in Young’s modulus, and strain remained constant although ultimate tensile strength slightly decreased. The thermal stability of SF molecules was greatly enhanced by iodine treatment. Iodinated SF fibers should be an attractive candidate for biomedical applications such as for producing antimicrobial filters, iodine containing wound-healing anion exchange fibers, etc.

In-situ growth of ZnO particles on bamboo pulp fabric and its anti-UV property

This research presents a simple way to enhance the anti-UV property of bamboo pulp fabric trough in situ synthesis of ZnO particles on the fabric. Bamboo Pulp Fabric was treated by immersion method in Zn(NO3)2 and multi-amide compound (RSD) aqueous solution under hydrothermal condition, then the ZnO particles were grown on the surface of bamboo pulp fabric by in-situ method. In this synthesis RSD was applied as a stabilizer, reactant and dispersant agent, the reaction mechanism was investigated. The ZnO particles were characterized by transmission electron microscope (TEM), Xray diffraction (XRD) and ultraviolet/visible light spectrophotometer. The anti-UV property of Bamboo Pulp Fabric was characterized by measuring its UPF. The results indicated that the diameter of ZnO is about 150 nm, the length is about 600 nm. The Bamboo Pulp Fabric treated with ZnO particles showed good anti-UV property and its UPF can reach to 83.59. After washing for 20 times, it can also keep good anti-UV property.

Structural and physical properties ofAntheraea pernyi silk fibroin fiber treated with I2-KI aqueous solution

Silk fibroin (SF) fiber from theAntheraea pernyi silkworm was treated with a 1.23 N iodine-potassium iodide (I2-KI) aqueous solution, and the structure and physical properties were investigated to clarify the effects of the iodine treatment. The noticeably high weight gain value of SF fiber, about 25 wt% was attributed to the absorption of polyiodide ions in the form of I3− and I5−. Fourier transform infrared spectroscopy and X-ray diffraction measurements suggested that polyiodide ions mainly entered the amorphous region. In addition, a new sharp reflection on the meridional direction, corresponding to a period of 7.0 Å, was observed and indicated the possibility of the formation of mesophase structure ofβ-conformation chains. Dynamic viscoelastic measurements showed that the damping tanδ peak at 270°C gradually shifted to lower temperature in the iodinated SF fibers, suggesting an enhancement of the molecular motion of the fibroin chains induced by the presence of polyiodide ions. With heating above 254 °C, the iodine component introduced intermolecular cross-linking of SF, and the melt flow of the sample was inhibited. The thermal decomposition stability of fibroin molecules was greatly enhanced by iodine treatment.