Mila Ilić

Ex situ bioremediation of a soil contaminated by mazut (heavy residual fuel oil)--a field experiment.

Mazut (heavy residual fuel oil)-polluted soil was exposed to bioremediation in an ex situ field-scale (600 m(3)) study. Re-inoculation was performed periodically with biomasses of microbial consortia isolated from the mazut-contaminated soil. Biostimulation was conducted by adding nutritional elements (N, P and K). The biopile (depth 0.4m) was comprised of mechanically mixed polluted soil with softwood sawdust and crude river sand. Aeration was improved by systematic mixing. The biopile was protected from direct external influences by a polyethylene cover. Part (10 m(3)) of the material prepared for bioremediation was set aside uninoculated, and maintained as an untreated control pile (CP). Biostimulation and re-inoculation with zymogenous microorganisms increased the number of hydrocarbon degraders after 50 d by more than 20 times in the treated soil. During the 5 months, the total petroleum hydrocarbon (TPH) content of the contaminated soil was reduced to 6% of the initial value, from 5.2 to 0.3 g kg(-1) dry matter, while TPH reduced to only 90% of the initial value in the CP. After 150 d there were 96%, 97% and 83% reductions for the aliphatic, aromatic, and nitrogen-sulphur-oxygen and asphaltene fractions, respectively. The isoprenoids, pristane and phytane, were more than 55% biodegraded, which indicated that they are not suitable biomarkers for following bioremediation. According to the available data, this is the first field-scale study of the bioremediation of mazut and mazut sediment-polluted soil, and the efficiency achieved was far above that described in the literature to date for heavy fuel oil.

Biodegradation of petroleum sludge and petroleum polluted soil by a bacterial consortium: a laboratory study

This article presents a study of the efficiency and degradation pattern of samples of petroleum sludge and polluted sandy soil from an oil refinery. A bacterial consortium, consisting of strains from the genera Pseudomonas, Achromobacter, Bacillus and Micromonospora, was isolated from a petroleum sludge sample and characterized. The addition of nitrogen and phosphorus nutrients and a chemical surfactant to both the samples and bioaugmentation to the soil sample were applied under laboratory conditions. The extent of biodegradation was monitored by the gravimetric method and analysis of the residual oil by gas chromatography. Over a 12-week experiment, the achieved degree of TPH (total petroleum hydrocarbon) degradation amounted to 82–88% in the petroleum sludge and 86–91% in the polluted soil. Gas chromatography–mass spectrometry was utilized to determine the biodegradability and degradation rates of n-alkanes, isoprenoids, steranes, diasteranes and terpanes. Complete degradation of the n-alkanes and isoprenoids fractions occurred in both the samples. In addition, the intensities of the peaks corresponding to tricyclic terpenes and homohopanes were decreased, while significant changes were also observed in the distribution of diasteranes and steranes.

Perfluorinated compounds in sediment samples from the wastewater canal of Pančevo (Serbia) industrial area

Perfluoroalkyl sulfonates (PFSAs) and perfluoroalkyl carboxylates (PFCAs) were analyzed in sediment samples from the wastewater canal draining the industrial complex of Pančevo, Serbia (oil refinery, petrochemical plant, and fertilizer factory). The canal is directly connected to Europes second largest river, the Danube, which drains its water into the Black Sea. Perfluorooctane sulfonate (PFOS) up to 5.7ngg(-1) dry weight (dw) and total Perfluorinated compounds (PFCs) up to 6.3ngg(-1) dw were detected. Compared to other reports, high levels of PFOS were found, even though PFCs are not used in the industrial production associated with this canal. The PFOS concentration in water was recalculated using the adsorption coefficient, KOC from literature. Using the average output of wastewater from the canal, a mass load of 1.38kg PFOS per year discharged in the Danube River has been calculated, which undoubtedly points to the contribution to global persistent organic pollution of surface waters originating from this industrial place.

Bioremediation of soil polluted with crude oil and its derivatives: Microorganisms, degradation pathways, technologies

The contamination of soil and water with petroleum and its products occurs due to accidental spills during exploitation, transport, processing, storing and use. In order to control the environmental risks caused by petroleum products a variety of techniques based on physical, chemical and biological methods have been used. Biological methods are considered to have a comparative advantage as cost effective and environmentally friendly technologies. Bioremediation, defined as the use of biological systems to destroy and reduce the concentrations of hazardous waste from contaminated sites, is an evolving technology for the removal and degradation of petroleum hydrocarbons as well as industrial solvents, phenols and pesticides. Microorganisms are the main bioremediation agents due to their diverse metabolic capacities. In order to enhance the rate of pollutant degradation the technology optimizes the conditions for the growth of microorganisms present in soil by aeration, nutrient addition and, if necessary, by adding separately prepared microorganisms cultures. The other factors that influence the efficiency of process are temperature, humidity, presence of surfactants, soil pH, mineral composition, content of organic substance of soil as well as type and concentration of contaminant. This paper presents a review of our ex situ bioremediation procedures successfully implemented on the industrial level. This technology was used for treatment of soils contaminated by crude oil and its derivatives originated from refinery as well as soils polluted with oil fuel and transformer oil.

Treatment of a mud pit by bioremediation.

The mud generated from oil and natural gas drilling, presents a considerable ecological problem. There are still insufficient remedies for the removal and minimization of these very stable emulsions. Existing technologies that are in use, more or less successfully, treat about 20% of generated waste drilling mud, while the rest is temporarily deposited in so-called mud pits. This study investigated in situ bioremediation of a mud pit. The bioremediation technology used in this case was based on the use of naturally occurring microorganisms, isolated from the contaminated site, which were capable of using the contaminating substances as nutrients. The bioremediation was stimulated through repeated inoculation with a zymogenous microbial consortium, along with mixing, watering and biostimulation. Application of these bioremediation techniques reduced the concentration of total petroleum hydrocarbons from 32.2 to 1.5 g kg−1 (95% degradation) during six months of treatment.

Biodegradation of the aromatic fraction from petroleum diesel fuel by Oerskovia sp. followed by comprehensive GC×GC-TOF MS

Polycyclic aromatic hydrocarbons (PAHs) from petroleum and fossil fuels are one of the most dominant pollutants in the environment. Since aromatic fraction from petroleum diesel fuel is mainly composed of PAHs, it is important to discover new microorganisms that can biodegrade these compounds. This article describes the biodegradation of the aromatic fraction separated from petroleum diesel fuel using the strain Oerskovia sp. CHP-ZH25 isolated from petroleum oil-contaminated soil. The biodegradation was monitored by gravimetry and GC × GC-TOF MS. An innovative method was applied to visualize degraded compounds in the data provided by a GC × GC-TOF MS. It was shown that Oerskovia sp. CHP-ZH25 degraded 77.4% based on gravimetric analysis within 30 days. Average rate of degradation was 14.4 mg/L/day, 10.5 mg/l/day and 4.0 mg/l/day from 0 to 10 day, 10-20 and 20-30 day, respectively. The order of PAH degradation based on decrease in peak volume after 30 days of incubation was as follows: dibenzothiophene derivatives > benzo[b]thiophene derivatives > naphthalene derivatives > acenaphthene derivatives > acenaphthylene/biphenyl derivatives > fluorene derivatives > phenanthrene/anthracene derivatives. Here we demonstrated that Oerskovia sp. CHP-ZH25 could potentially be a suitable candidate for use in bioremediation of environments polluted with different PAHs.

Natural attenuation of petroleum hydrocarbons—a study of biodegradation effects in groundwater (Vitanovac, Serbia)

The role of natural attenuation processes in groundwater contamination by petroleum hydrocarbons is of intense scientific and practical interest. This study provides insight into the biodegradation effects in groundwater at a site contaminated by kerosene (jet fuel) in 1993 (Vitanovac, Serbia). Total petroleum hydrocarbons (TPH), hydrochemical indicators (O2, NO3−, Mn, Fe, SO42−, HCO3−), δ13C of dissolved inorganic carbon (DIC), and other parameters were measured to demonstrate biodegradation effects in groundwater at the contaminated site. Due to different biodegradation mechanisms, the zone of the lowest concentrations of electron acceptors and the zone of the highest concentrations of metabolic products of biodegradation overlap. Based on the analysis of redox-sensitive compounds in groundwater samples, redox processes ranged from strictly anoxic (methanogenesis) to oxic (oxygen reduction) within a short distance. The dependence of groundwater redox conditions on the distance from the source of contamination was observed. δ13C values of DIC ranged from − 15.83 to − 2.75‰, and the most positive values correspond to the zone under anaerobic and methanogenic conditions. Overall, results obtained provide clear evidence on the effects of natural attenuation processes—the activity of biodegradation mechanisms in field conditions.

Bioremediation of Complex Pollutants from the Oil Industry Containing Cobalt and Molybdenum Catalysts

Bioremediation is the process of detoxification or elimination of pollutants using microorganisms with different metabolic capabilities. Biodegradation by natural populations of microorganisms is one of the primary mechanisms by which oil and other pollutants of hydrocarbon origin can be removed from the environment and it is also much cheaper than the other remediation technologies.In this study, we analyzed the samples of historical waste from the oil industry, which contained sand, organic materials, heavy fuel oil and catalysts used during the process of hydrodesulfurization (HDS) of oil. The aim was to examine the fate of cobalt and molybdenum, toxic heavy metals present in those catalysts. A consortium of microorganisms isolated from the complex pollutants from the oil industry was added to the samples. During the study, beside the transformation of cobalt and molybdenum forms, we also monitored the biodegradation process of the total petroleum hydrocarbons (TPH).