Milena Ignatova

Electrospun Non-Woven Nanofibrous Hybrid Mats Based on Chitosan and PLA for Wound-Dressing Applications

Continuous defect-free nanofibers containing chitosan (Ch) or quaternized chitosan (QCh) were successfully prepared by one-step electrospinning of Ch or QCh solutions mixed with poly[(L-lactide)-co-(D,L-lactide)] in common solvent. XPS revealed the surface chemical composition of the bicomponent electrospun mats. Crosslinked Ch- and QCh-containing nanofibers exhibited higher kill rates against bacteria S. aureus and E. coli than the corresponding solvent-cast films. SEM observations showed that hybrid mats were very effective in suppressing the adhesion of pathogenic bacteria S. aureus. The hybrid nanofibers are promising for wound-healing applications.

Electrospun Antibacterial Chitosan-Based Fibers

Chitosan is non-toxic, biocompatible, and biodegradable polysaccharide from renewable resources, known to have inherent antibacterial activity, which is mainly due to its polycationic nature. The combining of all assets of chitosan and its derivatives with the unique properties of electrospun nanofibrous materials is a powerful strategy to prepare new materials that can find variety of biomedical applications. In this article the most recent studies on different approaches for preparation of antibacterial fibrous materials from chitosan and its derivatives such as electrospinning, coating, and electrospinning-electrospraying, loading of drugs or bioactive nanoparticles are summarized.

Electrospun Nanofibrous Mats Containing Quaternized Chitosan and Polylactide with In Vitro Antitumor Activity against HeLa Cells

Nanofibrous materials containing the antitumor drug doxorubicin hydrochloride (DOX) were easily prepared using a one-step method by electrospinning of DOX/poly(L-lactide-co-D,L-lactide) (coPLA) and DOX/quaternized chitosan (QCh)/coPLA solutions. The pristine and DOX-containing mats were characterized by ATR-FTIR and X-ray photoelectron spectroscopy (XPS). The release rate of DOX from the prepared fibers increased with the increase in DOX content. The DOX release process was diffusion-controlled. MTT cell viability studies revealed that incorporation of DOX and QCh in the nanofibrous mats led to a significant reduction in the HeLa cells viability. It was found, that the antitumor efficacy of the DOX-containing mats at 6 h was higher than that of the free DOX. SEM, TEM, and fluorescence microscopic observations confirmed that the antitumor effect of QCh-based and DOX-containing fibrous mats was mainly due to induction of apoptosis in the HeLa cells.

Antitumor activity of quaternized chitosan-based electrospun implants against Graffi myeloid tumor

Nanofibrous implants containing quaternized chitosan (QCh), poly(L-lactide-co-D,L-lactide) (coPLA), and the antitumor drug doxorubicin (DOX) were fabricated by electrospinning. The surface chemical composition and the morphology of the implants were characterized by XPS and SEM. In vitro cell viability studies demonstrated that QCh- and DOX-based implants exhibited high cytotoxicity against Graffi tumor cells. The implants efficiently inhibited the growth of Graffi tumor in hamsters with minimum weight loss. Insertion of QCh/coPLA/DOX implants in the place of removed tumor led to an increase in the animal survival rate and to a decrease in the percentage of recurrences.

Electrospun Mats from Styrene/Maleic Anhydride Copolymers: Modification with Amines and Assessment of Antimicrobial Activity

New antimicrobial microfibrous electrospun mats from styrene/maleic anhydride copolymers were prepared. Two approaches were applied: (i) grafting of poly(propylene glycol) monoamine (Jeffamine® M-600) on the mats followed by formation of complex with iodine; (ii) modification of the mats with amines of 8-hydroxyquinoline or biguanide type with antimicrobial activity. Microbiological screening against S. aureus, E. coli and C. albicans revealed that both the formation of complex with iodine and the covalent attachment of 5-amino-8-hydroxyquinoline or of chlorhexidine impart high antimicrobial activity to the mats. In addition, S. aureus bacteria did not adhere to modified mats.

Preparation and metal ion complexing ability of polyethers with 8-hydroxy-5-quinolinyl end-groups

Abstract Polyethers with 8-hydroxy-5-quinolinyl end-groups (P–Q) were prepared by reaction of polyethers having amino end-groups with 5-chloromethyl-8-quinolinol hydrochloride. The modified polymers were characterized by SEC, UV, IR and 1H-NMR spectroscopy. The complexation between P–Q and Fe3+ or bivalent metal ions was studied. The stability of the complexes was estimated by UV/Vis spectroscopy and the following order was found: Cu2+>Ni2+>Zn2+>Cd2+≥Mn2+. The metal ion complexes of P–Q were water-soluble.

Antibacterial and antimycotic activity of a cross-linked electrospun poly(vinyl pyrrolidone)–iodine complex and a poly(ethylene oxide)/poly(vinyl pyrrolidone)–iodine complex

Photo-cross-linked poly(vinyl pyrrolidone) (PVP) and poly(ethylene oxide)(PEO)/PVP electrospun nanofibrous mats containing complex-bound iodine have been studied. FT-IR spectroscopy analyses have proved that coordination of molecular iodine with carbonyl group and nitrogen atom of pyrrolidone rings of the PVP chains has taken place. The distribution of iodine along the fibers is uniform as revealed by X-ray mapping. The microbiological tests have demonstrated that the iodine complex-containing electrospun mats are highly effective against the Gram-positive bacterium Staphylococcus aureus, the Gram-negative bacterium Escherichia coli and the fungus Candida albicans. Comparison with iodine complex-containing films has shown that the iodine complex-containing nanofibers exhibit a higher killing rate than the films against bacteria E. coli. SEM observations showed that PVP–iodine nanofibrous mats inhibit the adhesion of bacteria S. aureus. These characteristic features make the electrospun iodine-containing nanofibers good candidates for wound-dressing materials.

Poly(3-hydroxybutyrate)/caffeic acid electrospun fibrous materials coated with polyelectrolyte complex and their antibacterial activity and in vitro antitumor effect against HeLa cells.

Abstract The purpose of this work was to investigate the possibility for the preparation of new poly(3-hydroxybutyrate) (PHB)/poly(ethylene glycol) (PEG)-based fibrous materials containing natural phenolic compound caffeic acid (CA) of diverse architectures, as well as to study the impact of the fiber composition on the in vitro CA release profile and on the biological properties of the fibrous materials. The application of the one-pot electrospinning enabled the fabrication of nanofibrous materials from PHB and PEG loaded with the CA. Materials with targeted design were obtained by coating with polyelectrolyte complex of alginate (Alg) and N,N,N-trimethylchitosan (TMCh). Three different processing paths were used to obtain coated mats: (i) with CA incorporated in the PHB/PEG core; (ii) with CA embedded in the Alg layer; and (iii) with CA included in the TMCh layer. The in vitro release of CA was modulated by controlling the composition and the architecture of the nanofibrous mats. The performed microbiological screening and MTT cell viability studies revealed that in contrast to the bare mats, the CA-containing nanofibrous materials were effective in suppressing the growth of the Gram-positive bacteria Staphylococcus aureus and the Gram-negative bacteria Escherichia coli and displayed good cytotoxicity against human cervical HeLa tumor cells. In addition, the proliferation of murine spleen lymphocytes and peritoneal macrophages was increased by the prepared CA-containing nanofibrous materials. The obtained materials are promising for antibacterial wound dressing applications as well as for application in local treatment of cervical tumors.

Quaternized chitosan-coated nanofibrous materials containing gossypol: preparation by electrospinning, characterization and antiproliferative activity towards HeLa cells.

Nanofibrous polylactide-based materials loaded with a natural polyphenolic compound gossypol (GOS) with antitumor properties were prepared by electrospinning. The nanofibrous materials were coated with a thin film of crosslinked quaternized chitosan (QCh). GOS incorporated in the nanofibrous mats was in the amorphous state. GOS release was diffusion-controlled and its in vitro release profiles depended on the mat composition. The nanofibrous materials exhibited high cytotoxicity towards HeLa tumor cells. Interestingly, it was particularly pronounced in the case of fibrous materials, which contain both QCh and GOS. The observed strong antiproliferative effect of the nanofibrous mats was mainly due to induction of cell apoptosis.

Antiproliferative activity of nanofibers containing quaternized chitosan and/or doxorubicin against MCF-7 human breast carcinoma cell line by apoptosis:

The antiproliferative activity of electrospun mats of poly(L-lactide-co-D,L-lactide) (coPLA) containing quaternized chitosan (QCh) and/or doxorubicin hydrochloride (DOX) was evaluated against the Michigan Cancer Foundation-7(MCF-7) human breast carcinoma cell line. QCh- and DOX-containing nanofibrous mats possess good antiproliferative activity and decrease considerably the viability of the MCF-7 cells for the different periods of cell incubation as confirmed by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Fluorescent microscopy analyses and scanning electron microscopy observations revealed that apoptosis was one of the major mechanisms of MCF-7 cell death induced by the QCh- and DOX-containing mats.