Min-Gon Kim

Highly Sensitive Biosensing Using Arrays of Plasmonic Au Nanodisks Realized by Nanoimprint Lithography

We describe the fabrication of elliptical Au nanodisk arrays as a localized surface plasmon resonance (LSPR) sensing substrate for clinical immunoassay via thermal nanoimprint lithography (NIL) and enhancement in the sensitivity of the detection of the prostate-specific antigen (PSA) using the precipitation of 5-bromo-4-chloro-3-indolyl phosphate p-toluidine/nitro blue tetrazolium (BCIP/NBT), catalyzed by alkaline phosphatase. Au nanodisks were fabricated on glass through an unconventional tilted evaporation, which could preserve the thickness of imprinted resists and create an undercut beneficial to the subsequent lift-off process without any damage to pattern dimension and the glass while removing the residual polymers. To investigate the optically anisotropic property of the LSPR sensors, a probe light with linear polarization parallel to and perpendicular to the long axis of the elliptical nanodisk array was utilized, and their sensitivity to the bulk refractive index (RI) was measured as 327 and 167 nm/RIU, respectively. To our knowledge, this is the first application of enzyme-substrate reaction to sandwich immunoassay-based LSPR biosensors that previously suffered from a low sensitivity due to the short penetration depth of the plasmon field, especially when large-sized antibodies were used as bioreceptors. As a result, a large change in local refractive index because of the precipitation on the Au nanodisks amplified the wavelength shift of the LSPR peak in the vis-NIR spectrum, resulting in femtomolar detection limits, which was ∼10(5)-fold lower than the label-free detection without the enzyme precipitation. This method can be extended easily to the other clinical diagnostics with a high sensitivity.

Graphene-Based Chemiluminescence Resonance Energy Transfer for Homogeneous Immunoassay

We report on chemiluminescence resonance energy transfer (CRET) between graphene nanosheets and chemiluminescent donors. In contrast to fluorescence resonance energy transfer, CRET occurs via nonradiative dipole-dipole transfer of energy from a chemiluminescent donor to a suitable acceptor molecule without an external excitation source. We designed a graphene-based CRET platform for homogeneous immunoassay of C-reactive protein (CRP), a key marker for human inflammation and cardiovascular diseases, using a luminol/hydrogen peroxide chemiluminescence (CL) reaction catalyzed by horseradish peroxidase. According to our results, anti-CRP antibody conjugated to graphene nanosheets enabled the capture of CRP at the concentration above 1.6 ng mL(-1). In the CRET platform, graphene played a key role as an energy acceptor, which was more efficient than graphene oxide, while luminol served as a donor to graphene, triggering the CRET phenomenon between luminol and graphene. The graphene-based CRET platform was successfully applied to the detection of CRP in human serum samples in the range observed during acute inflammatory stress.

A dual gold nanoparticle conjugate-based lateral flow assay (LFA) method for the analysis of troponin I.

For signal amplification without an additional operation step in a gold nanoparticle (AuNP)-based lateral flow assay (LFA), a new and simple method utilizing two AuNP-antibody conjugates was developed. The 1st conjugate was the AuNP immobilized with an anti-troponin I antibody and blocked with bovine serum albumin (BSA), and the 2nd conjugate was the AuNP immobilized with an anti-BSA antibody and blocked with human serum albumin. The two conjugates were encapsulated in different pads, respectively. A scheme of the LFA system is described in the part A of first figure. The size of the two conjugates was very critical in the detection sensitivity of troponin I. When 10nm for the 1st and 40 nm for the 2nd were used, the detection sensitivity increased about a 100-fold compared to the conventional LFA. We could detect as low as 0.01 ng/mL troponin I in 10 min using the dual AuNP conjugate-based LFA, which was successfully applied in the analysis of serum samples of patients with myocardial infarction.

Novel antibody/gold nanoparticle/magnetic nanoparticle nanocomposites for immunomagnetic separation and rapid colorimetric detection of Staphylococcus aureus in milk

We demonstrated the new antibody/gold nanoparticle/magnetic nanoparticle nanocomposites (antibody/AuNP/MNPs) and their application in the detection of the foodborne pathogen, Staphylococcus aureus (S. aureus), in milk. The nanocomposites were synthesized by coating the MNPs with bovine serum albumin (BSA) then adsorbing the AuNPs and anti-S. aureus antibodies on their surface. Using the completed immunomagnetic nanostructures, S. aureus inoculated in the milk sample was captured and isolated from the medium using the permanent magnet. The nanoparticle-bound cells as well as the unbound cells in the supernatant were enumerated via surface plating to evaluate the target binding capacity of the nanocomposites. The capture efficiencies of the antibody/AuNP/MNPs were 96% and 78% for S. aureus in PBS and the milk sample respectively, which were significantly higher than those of the antibody-coupled MNPs without any AuNP. The captured cells were also applied to the selective filtration system to produce color signals that were used for the detection of the target pathogen. During the filtration, the cells bound to the antibody/AuNP/MNPs remained on the surface of the membrane filter while unbound nanoparticles passed through the uniform pores of the membrane. After the gold enhancement, the cells-particles complex resting on the membrane surface rendered a visible color, and the signal intensity became higher as the target cell concentration increased. The detection limits of this colorimetric sensor were 1.5×10(3) and 1.5×10(5)CFU for S. aureus in PBS and the milk sample respectively. This sensing mechanism also had the high specificity for S. aureus over the other pathogens such as Escherichia coli, Listeria monocytogenes, and Salmonella enterica. The assay required only 40min to obtain the results. With the use of the appropriate antibodies, our immunomagnetic nanocomposites-based detection strategy can provide an easy, convenient, and rapid sensing method for a wide range of pathogens.

An aptamer-based dipstick assay for the rapid and simple detection of aflatoxin B1.

A rapid and simple dipstick assay based on an aptamer has been developed for the determination of aflatoxin B1 (AFB1). The dipstick assay format was based on a competitive reaction of the biotin-modified aptamer specific to AFB1 between target and cy5-modified DNA probes. Streptavidin and anti-cy5 antibody as capture reagents were immobilized at test and control lines on a membrane of the dipstick assay. After optimization, the limit of detection for the dipstick assay was 0.1 ng/ml AFB1 in buffer. The method was confirmed to be specific to AFB1, and the entire process of the assay can be completed within 30 min. Aqueous methanol (20%) provided a good extraction efficiency, and the matrix influence from corn extracts was successfully reduced through 2-fold dilution. The results of AFB1 analysis for corn samples spiked with known concentration of AFB1 by the dipstick assay and ELISA showed good agreement. The cut-off value of the dipstick assay for corn samples was 0.3 ng/g AFB1. Therefore, the dipstick assay is first reported and considered as a rapid, simple, on-site and inexpensive screening tool for AFB1 determination in grains as well as a corn.

A regeneratable, label-free, localized surface plasmon resonance (LSPR) aptasensor for the detection of ochratoxin A.

Binding of an analyte on the surface of a nanoparticle typically promotes a change in the local refractive index, which gives rise to a shift in the wavelength of the localized surface plasmon resonance (LSPR) absorption band. The magnitude of the LSPR wavelength change is dependent on both the location of the analyte relative to the surface of the nanoparticle and the degree of alteration of the refractive index. We have employed this phenomenon as the basis for designing a new, label-free approach for the detection of the toxic mold mycotoxin, ochratoxin A (OTA) that employs a gold nanorod (GNR) and an aptamer target binding mechanism. In this system, binding of OTA causes an accumulation of OTA and G-quadruplex structure of the aptamer. This process results in a longitudinal wavelength shift of the LSPR peak associated with a change in the local refractive index near the GNR surface. By using this method, OTA can be quantitatively detected at concentrations lower than 1 nM. In addition, the results of this effort show that aptamer functionalized GNR substrate is robust in that it can be regenerated for reuse over seven times by heating in methanol at 70 °C to remove OTA. Moreover, the proposed biosensor system exhibits high selectivity for OTA over other mycotoxins. Finally, the sensor can be employed to detect OTA in ground corn samples with excellent recovery levels.

Addressable micropatterning of multiple proteins and cells by microscope projection photolithography based on a protein friendly photoresist.

We report a new method for the micropatterning of multiple proteins and cells with micrometer-scale precision. Microscope projection photolithography based on a new protein-friendly photoresist, poly(2,2-dimethoxy nitrobenzyl methacrylate-r-methyl methacrylate-r-poly(ethylene glycol) methacrylate) (PDMP), was used for the fabrication of multicomponent protein/cell arrays. Microscope projection lithography allows precise registration between multiple patterns as well as facile fabrication of microscale features. Thin films of PDMP became soluble in near-neutral physiological buffer solutions upon UV exposure and exhibited excellent resistance to protein adsorption and cell adhesion. By harnessing advantages in microscope projection photolithography and properties of PDMP thin films, we could successfully fabricate protein arrays composed of multiple proteins. Furthermore, we could extend this method for the patterning of two different types of immune cells for the potential study of immune cell interactions. This technique will in general be useful for protein chip fabrication and high-throughput cell-cell communication study.

Surface Plasmon Resonance Analysis of Alzheimer's β-Amyloid Aggregation on a Solid Surface: From Monomers to Fully-Grown Fibrils

We analyzed the aggregation of Alzheimers beta-amyloid (1-42) (Abeta42) peptides from fresh monomers to fully grown fibrils by using in situ surface plasmon resonance (SPR) spectrometry and ex situ atomic force microscopy (AFM). To immobilize Abeta42 peptide on an SPR chip surface, different carboxy-terminated surfaces were investigated: (1) self-assembled monolayer of 11-mercaptoundecanoic acid and (2) carboxylated dextran-modified surface. It was found that the carboxylated dextran surface was more appropriate due to a much lower degree of nonspecific binding. By using the carboxylated dextran surface, we further investigated effects of key environmental factors, such as the density of surface-bound Abeta42, the concentration of Abeta42 in solution phase, and the presence of Fe3+ ions on Abeta42 fibrillation. The increase in either the surface density of Abeta42 or its concentration in incubation solution highly accelerated the formation of amyloid fibrils on the chip surface. The presence of Fe3+ ions in the incubation solution induced significantly denser aggregates, resulting in a nearly 6-fold increase of SPR angle shift. This work shows that SPR analysis coupled with AFM can be effectively used for analyzing amyloid aggregation and deposition on a solid surface from the very beginning to fully grown fibrils.

High sensitivity detection of 16s rRNA using peptide nucleic acid probes and a surface plasmon resonance biosensor

A signal enhancing method allowing highly sensitive detection of E. coli 16s rRNA was developed using peptide nucleic acid (PNA) as a capture probe and a surface plasmon resonance (SPR) sensor as a detector. 16s rRNA has been used as a genetic marker for identification of organisms, and can be analyzed directly without PCR amplification due to the relatively high number of copies. PNA has a neutral backbone structure, therefore hybridization with 16s rRNA results in the ionic condition being changed from neutral to negative. A cationic Au nanoparticle was synthesized and used for signal amplification by ionic interaction with 16s rRNA hybridized on the PNA probe-immobilized SPR sensor chip. This method resulted in a detection limit of E. coli rRNA of 58.2+/-1.37 pg mL(-1). Using this analytical method, Staphylococcus aureus was detected without purification of rRNA.

An automatic enzyme immunoassay based on a chemiluminescent lateral flow immunosensor

Microfluidic integrated enzyme immunosorbent assay (EIA) sensors are efficient systems for point-of-care testing (POCT). However, such systems are not only relatively expensive but also require a complicated manufacturing process. Therefore, additional fluidic control systems are required for the implementation of EIAs in a lateral flow immunosensor (LFI) strip sensor. In this study, we describe a novel LFI for EIA, the use of which does not require additional steps such as mechanical fluidic control, washing, or injecting. The key concept relies on a delayed-release effect of chemiluminescence substrates (luminol enhancer and hydrogen peroxide generator) by an asymmetric polysulfone membrane (ASPM). When the ASPM was placed between the nitrocellulose (NC) membrane and the substrate pad, substrates encapsulated in the substrate pad were released after 5.3 ± 0.3 min. Using this delayed-release effect, we designed and implemented the chemiluminescent LFI-based automatic EIA system, which sequentially performed the immunoreaction, pH change, substrate release, hydrogen peroxide generation, and chemiluminescent reaction with only 1 sample injection. In a model study, implementation of the sensor was validated by measuring the high sensitivity C-reactive protein (hs-CRP) level in human serum.