Mindi Feilmeier

Observed Changes in Radiographic Measurements of the First Ray after Frontal and Transverse Plane Rotation of the Hallux: Does the Hallux Drive the Metatarsal in a Bunion Deformity?

It is well known that the pathologic positions of the hallux and the first metatarsal in a bunion deformity are multiplanar. It is not universally understood whether the pathologic changes in the hallux or first metatarsal drive the deformity. We have observed that frontal plane rotation of the hallux can result in concurrent positional changes proximally in the first metatarsal in hallux abducto valgus. In the present study, we observed the changes in common radiographic measurements used to evaluate a bunion deformity in 5 fresh frozen cadaveric limbs. We measured the tibial sesamoid position, 1-2 intermetatarsal angle, and first metatarsal cuneiform angle on anteroposterior radiographs after frontal and transverse plane manipulation of the hallux. When the hallux was moved into an abducted and valgus position, a statistically significant increase was found in the tibial sesamoid position (p = .016). However, we did not observe a significant increase in the intermetatarsal angle (p = .070) or medial cuneiform angle (p = .309). When the hallux was manipulated into an adducted and varus position, a statistically significant decrease in the intermetatarsal angle (p = .02) and a decrease in the tibial sesamoid position (p = .016) was seen, with no significant change in the medial cuneiform angle (p = .360). We also observed a consistent rounding of the lateral aspect of the first metatarsal head and an increase in the concavity of the lateral metatarsal shaft, with valgus rotation of the hallux. From these observations, it is possible that the hallux could drive the proximal changes in the first ray that lead to metatarsus primus adducto valgus deformity.

Clarification of the Anatomic Definition of the Bunion Deformity

Evolution of the terminology applied to the bunion deformity has progressed in parallel with our changing understanding of the deformity itself. Along this path of progression have been multiple terms, sometimes with multiple meanings. Hallux valgus and metatarsus primus varus are 2 of the most common terms for the deformity. Although commonly used, these descriptors can have multiple meanings, and inconsistencies in interpretation can lead to confusion. We propose a more detailed terminology to provide a more accurate description of the entire bunion deformity in 3 planes and for both the hallux and the metatarsal component of the deformity. The term we propose is hallux abducto valgus with metatarsus primus adducto valgus. An accurate understanding of the multiplanar position of the deformed foot is important for planning deformity correction. The descriptors in the terminology proposed will keep in the forefront the aspects of correction required for the first ray and hallux to be returned to an anatomically correct position.

Quantitative Analysis of the Degree of Frontal Rotation Required to Anatomically Align the First Metatarsal Phalangeal Joint During Modified Tarsal-Metatarsal Arthrodesis Without Capsular Balancing

The data from 35 consecutive patients with hallux valgus undergoing triplane arthrodesis at the first tarsal metatarsal joint were studied to determine the amount of first metatarsal frontal plane rotation (supination) needed to anatomically align the first metatarsal phalangeal joint on an anterior posterior radiograph without soft tissue balancing at the first metatarsal phalangeal joint. Radiographs were measured both pre- and postoperatively to assess the 1-2 intermetatarsal angle, hallux abductus angle, and tibial sesamoid position (TSP). The mean amount of varus (supination) rotation performed during correction was 22.1° ± 5.2° and the mean amount of intermetatarsal angle reduction achieved after completion of the procedure was 6.9° ± 3.0°. The TSP changed by a mean of 3.3° ± 1.2°. A series of univariate linear regression analyses was performed to analyze the relationship between the frontal plane rotation of the first metatarsal performed during the operation and the preoperative intermetatarsal angle, hallux abductus angle, and TSP. Greater preoperative TSP scores were associated with greater intraoperative varus (supination) rotation required for joint alignment. Direct observation of the alignment changes at the first metatarsal phalangeal joint after metatarsal rotation without distal procedures strengthened the notion that the frontal plane rotational position plays an important role in the bunion deformity.

Reduction of the Intermetatarsal Angle after First Metatarsal Phalangeal Joint Arthrodesis: A Systematic Review

Arthrodesis of the first metatarsophalangeal joint (MTPJ) has commonly been used for the treatment of a variety of first MTPJ disorders, including hallux valgus. We undertook a systematic review of the electronic databases and other relevant sources to identify material relating to the reduction of the first intermetatarsal angle (IMA) after first MTPJ arthrodesis. Fifteen studies with a total of 701 first MTPJ arthrodesis procedures were identified that met the inclusion criteria. Our results showed the mean preoperative IMA was 13.74° and the mean postoperative IMA was 9.38°, for a mean change in the IMA of 4.36°. The data were analyzed further in 2 subsets. The first subset included 8 studies (434 procedures) that reported a mean preoperative IMA of less than 15°. The mean change in the IMA in this group was 3.70°. The second subset included 7 studies (267 procedures) that reported a mean preoperative IMA of greater than 15°. The mean change in the IMA in this group was 5.42°. The results of the present systematic review have confirmed that a significant reduction of the first IMA can be achieved by first MTPJ arthrodesis alone and that additional procedures to correct the IMA will not be necessary.

Incidence of Surgical Site Infection in the Foot and Ankle with Early Exposure and Showering of Surgical Sites: A Prospective Observation

The incidence of postoperative surgical site infection (SSI) reported in the published data for foot and ankle surgery has been 1.0% to 5.3%. A variety of interventions have been used before, during, and after surgery to decrease the patients risk of acquiring an infection at the surgical site. Foot and ankle surgeons often keep the incision site dry and covered until the sutures and pins have been removed, with the goal of preventing a SSI, despite the lack of available published evidence to support this practice. We undertook a prospective observation of 110 elective surgical patients to determine the rate of SSI when early surgical site exposure and showering were allowed. The risk factors for infection were recorded, and a series of logistic regression analyses was performed to determine the associations between the infection rate and early showering. The patients were evaluated at each postoperative appointment for signs of infection. For the present study, mild infection was defined as the subjective presence of erythema and/or swelling beyond that typically expected in the early postoperative period. These cases of presumed or mild SSI were managed with oral antibiotics until they had resolved. Major infection was defined as any infection altering the course of recovery or requiring admission or additional surgery. The overall infection rate was 4.5%, with all infections considered mild. Logistic regression analysis showed that none of the recorded risk factors significantly predicted infection. The results of the present study suggest that early daily showering of a surgical site after foot and ankle surgery will not be significantly associated with an increased risk of infection.

Does Postoperative Showering or Bathing of a Surgical Site Increase the Incidence of Infection? A Systematic Review of the Literature

Infection is one of the many postoperative complications a surgeon must attempt to control during the perioperative period. Surgeons have used a variety of modalities to prevent surgical site infection and have adhered to a variety of protocols. It has been common for foot and ankle surgeons to recommend that a patient keep the surgical incision covered and dry and to instruct the patient to avoid bathing and showering until the sutures have been removed. Surgeons have theorized that this will reduce contamination of the surgical site and help to prevent infection. We questioned the evidence basis for this practice and undertook a systematic review of electronic databases and other relevant sources regarding the incidence of infection when patients had been allowed to wet their surgical incision site by showering or bathing before suture removal. Nine studies involving 2150 patients met our inclusion criteria. No increased incidence of infection was found in the patients allowed to shower or bathe as a part of their normal daily hygiene before suture removal compared with those who were instructed to keep the site dry until suture removal.

Complications of Metatarsal Suture Techniques for Bunion Correction: A Systematic Review of the Literature

To better understand the safety of suture techniques to reduce the intermetatarsal angle in patients with hallux valgus deformity, we undertook a systematic review of the complications associated with the use of this technique. The suture procedures of 197 patients were analyzed for complications. The number of complications in the total group (n = 197) at a pooled mean follow-up period of 23.2 months was 39 (19.8%) and included 21 fractures (10.7%), 11 cases of hardware failure (5.6%), and 7 cases of hallux varus (3.6%). The cohort of patients was further categorized by the specific procedure technique. The number of complications in the Mini TightRope(®) group (n = 132) at a pooled mean follow-up period of 16.2 months was 33 (25%) and included 18 fractures (13.6%), 10 cases of hardware failure (7.6%), and 5 cases of hallux varus (3.8%). The number of complications in the syndesmosis technique group (n = 65) at a pooled mean follow-up period of 56.1 months was 6 (9.2%) and included 3 fractures (5%), 1 case of hardware failure (1.5%), and 2 cases of hallux varus (3%). From our review of the published experience with this technique, a high complication rate can be expected.

Technique for Minimally Invasive Reduction of Calcaneal Fractures Using Small Bilateral External Fixation

Soft tissue complications are well known after extensile exposure of the calcaneus for open reduction internal fixation of fractures. A variety of recommendations have been proposed to reduce soft tissue healing issues and infection. Despite these recommendations, some surgeons believe that soft tissue complication rates have remained unacceptably high with lateral extensile incisions. Recently, interest in minimally invasive repair techniques for calcaneal fractures has increased. These techniques have been purported to avoid some of the common soft tissue problems seen with calcaneal open reduction internal fixation. The focus of the present communication is to share a minimally invasive surgical method for the reduction and fixation of calcaneal fractures. Percutaneous fixation of the posterior facet fragments can be facilitated by distraction of the fractured calcaneus using skeletal traction and a small bilateral external fixator. Final stability is achieved with a combination of the external fixator and percutaneous screws and/or wires. We present our technique and discuss recent published studies on minimally invasive repair of calcaneal fractures.

Comparison of Transverse and Coronal Plane Stability at the First Tarsal-Metatarsal Joint With Multiple Screw Orientations.

Intercuneiform instability has been recognized as a potential cause of hallux valgus recurrence following tarsal-metatarsal joint (TMTJ) fusion. Recommendations have been made for additional screw placement between the metatarsals and/or the cuneiforms to improve stability. The screw orientation that provides the best stability has not been documented. Twelve cadavers with the first TMTJ fixated were used for testing. Using a consistent force application of 15 pounds in both the transverse and coronal planes, we measured the change in intermetatarsal angle on radiographs. Force testing was repeated with screws deployed individually in the following orientations: first to second cuneiform (CC), first to second metatarsal (MM), and first metatarsal to middle cuneiform (MC). Our results indicate that stability of the first ray in the transverse and coronal planes is not improved with TMTJ fixation alone or with an additional CC screw. The MM screw consistently reduced first metatarsal instability in both planes. The MC screw had intermediate results. These findings strengthen the notion that first ray instability is complex and involves the tarsal and metatarsal articulations at multiple levels outside of the TMTJ alone. Levels of Evidence: Diagnostic and Therapeutic, Level IV: Cadaveric Study

Measurement of mid-calcaneal length on plain radiographs: reliability of a new method.

The authors present a new method to reliably measure the length of the mid-portion of the calcaneus. The authors defined the “mid-calcaneal length” as the line connecting the high point of the convex arc of the posterior subtalar joint facet and the low point of the concave arc of the calcaneocuboid joint. Statistical analysis of 810 measurements taken by 6 observers confirmed high intraobserver reliability, interobserver reliability, and internal consistency (Cronbach coefficient α = .98) and low error rate (Pearson correlation coefficient = .0001). The authors have used this measurement as a tool to determine the change in calcaneal length after osteotomy lengthening procedures and present it as a tool for clinical practice and research. Level of Evidence: Diagnostic, Level III