Ming-Fei Shao

A comparative study of the bacterial community in denitrifying and traditional enhanced biological phosphorus removal processes.

Denitrifying phosphorus removal is an attractive wastewater treatment process due to its reduced carbon source demand and sludge minimization potential. Two lab-scale sequencing batch reactors (SBRs) were operated in alternating anaerobic-anoxic (A-A) or anaerobic-oxic (A-O) conditions to achieve denitrifying enhanced biological phosphate removal (EBPR) and traditional EBPR. No significant differences were observed in phosphorus removal efficiencies between A-A SBR and A-O SBR, with phosphorus removal rates being 87.9% and 89.0% respectively. The community structures in denitrifying and traditional EBPR processes were evaluated by high-throughput sequencing of the PCR-amplified partial 16S rRNA genes from each sludge. The results obtained showed that the bacterial community was more diverse in A-O sludge than in A-A sludge. Taxonomy and β-diversity analyses indicated that a significant shift occurred in the dominant microbial community in A-A sludge compared with the seed sludge during the whole acclimation phase, while a slight fluctuation was observed in the abundance of the major taxonomies in A-O sludge. One Dechloromonas-related OTU outside the 4 known Candidatus “Accumulibacter” clades was detected as the main OTU in A-A sludge at the stationary operation, while Candidatus “Accumulibacter” dominated in A-O sludge.

Aerobic methane oxidation coupled to denitrification in a membrane biofilm reactor: Treatment performance and the effect of oxygen ventilation

Aerobic methane-oxidation coupled to denitrification (AME-D) process was successfully achieved in a membrane biofilm reactor (MBfR). PVDF membrane was employed to supply the methane and oxygen for biofilm, which was coexistence of methanotrophs and denitrifier. With a feeding NO3(-)-N of 30 mg/L, up to 97% nitrate could be removed stably. The oxygen ventilation modes impacted the denitrification performance remarkably, resulting in different nitrate removal efficiencies and biofilm microorganism distribution. The biofilm sludge showed a high resistance to the DO inhibition, mainly due to the co-existing methanotroph being capable of utilizing oxygen perferentially within biofilm, and create an anoxic micro-environment. The denitrification of both nitrate and nitrite by biofilm sludge conformed to the Monod equation, and the maximum specific nitrate utilization rate (k) ranged from 1.55 to 1.78 NO3(-)-N/g VSS-d. The research findings should be significant to understand the considerable potential of MBfR as a bioprocess for denitrification.

Metagenomic Analysis of the Sludge Microbial Community in a Lab-Scale Denitrifying Phosphorus Removal Reactor

Denitrifying phosphorus removal is an attractive wastewater treatment process due to its reduced carbon source demand and sludge minimization potential. In the present study, the metagenome of denitrifying phosphorus removal sludge from a lab-scale anaerobic–anoxic SBR was generated by Illumina sequencing to study the microbial community. Compared with the aerobic phosphorus removal sludge, the denitrifying phosphorus removal sludge demonstrated quite similar microbial community profile and microbial diversity with sludge from Aalborg East EBPR WWTP. Proteobacteria was the most dominant phylum; within Proteobacteria, β-Proteobacteria was the most dominant class, followed by α-, γ-, δ-, and ε-Proteobacteria. The genes involved in phosphate metabolism and biofilm formation reflected the selective pressure of the phosphorus removal process. Moreover, ppk sequence from DPAO was outside the Accumulibacter clusters, which suggested different core phosphorus removal bacteria in denitrifying and aerobic phosphorus removal systems. In a summary, putative DPAO might be a novel genus that is closely related between Accumulibacter and Dechloromonas within Rhodocyclus. The microbial community and metabolic profiles achieved in this study will eventually help to improve the understanding of key microorganisms and the entire community in order to improve the phosphorus removal efficiency of EBPR processes.

Activated sludge filterability improvement by nitrifying bacteria abundance regulation in an adsorption membrane bioreactor (Ad-MBR)

Autotrophic nitrifying bacteria have its intrinsic properties including low EPS production, dense colonial structure and slow-growth rate, favoring the sludge filterability improvement. An adsorption-MBR (Ad-MBR) was developed to enrich nitrifier abundance in the MBR chamber by inlet C/N regulation, and its possible positive effect on sludge filterability and underlying mechanisms were investigated. By DNA extraction, PCR amplification and Illumina high-throughput pyrosequencing, the abundance of nitrifying bacteria was accurately quantified. More than 8.29% nitrifier abundance was achieved in Ad-MBR sludge, which was above three times of that in conventional MBR. Regulated C/N ratio and thereafter nitrifier abundance enrichment improved sludge filterability by altering sludge mixture and its supernatant properties, reflected by a good sludge settleability, a low supernatant viscosity and turbidity, a low supernatant organic substances concentration, and a small amount of strong hydrophobic fractional components, thus to profoundly improve sludge filterability and decelerate membrane fouling.

Nitrate removal with lateral flow sulphur autotrophic denitrification reactor

An innovative lateral flow sulphur autotrophic denitrification (LFSAD) reactor was developed in this study; the treatment performance was evaluated and compared with traditional sulphur/limestone autotrophic denitrification (SLAD) reactor. Results showed that nitrite accumulation in the LFSAD reactor was less than 1.0 mg/L during the whole operation. Denitrification rate increased with the increased initial alkalinity and was approaching saturation when initial alkalinity exceeded 2.5 times the theoretical value. Higher influent nitrate concentration could facilitate nitrate removal capacity. In addition, denitrification efficiency could be promoted under an appropriate reflux ratio, and the highest nitrate removal percentage was achieved under reflux ratio of 200%, increased by 23.8% than that without reflux. Running resistance was only about 1/9 of that in SLAD reactor with equal amount of nitrate removed, which was the prominent excellence of the new reactor. In short, this study indicated that the developed reactor was feasible for nitrate removal from waters with lower concentrations, including contaminated surface water, groundwater or secondary effluent of municipal wastewater treatment with fairly low running resistance. The innovation in reactor design in this study may bring forth new ideas of reactor development of sulphur autotrophic denitrification for nitrate-contaminated water treatment.

Airborne bacterial contaminations in typical Chinese wet market with live poultry trade.

Chinese wet markets with live poultry trade have been considered as major sources of pathogen dissemination, and sites for horizontal transfer of bacterial and viral pathogens. In this study, the pathogenic bacteria and antibiotic resistant genes (ARGs) in air samples collected at a typical Chinese wet market had been analysis and quantified. Corynebacterium minutissimum and other pathogenic bacteria accounted for 0.81-8.02% of the whole microbial community in different air samples. The four ARGs quantified in this study showed a comparable relative concentration (copies/ng_DNA) with municipal wastewater. Poultry manures were demonstrated to be important microbial contamination source in wet market, which was supported by both microbial composition based source tracking and the quantification of airborne microbial density. A series of Firmicutes and Bacteroidetes indicators of poultry area contamination were successfully screened, which will be useful for the more convenient monitoring of airborne poultry area contamination. Our results indicate bioaerosols acted as important route for the transmissions of pathogens and ARGs. Continued surveillance of airborne microbial contamination is required in poultry trade wet market. PRACTICAL IMPLICATIONS Urban live poultry markets are important sources of pathogen dissemination, and sites for horizontal transfer of viral and bacterial pathogens. In the present field-study, pathogenic bacteria and antibiotic resistance genes were focused to provide quantitative information on the levels of microbial contaminations at the indoor air of wet markets. Results demonstrated that poultry manures were important microbial contamination source in wet market, and in the meanwhile bioaerosols were identified as important route for the transmissions of microbial contaminants. A series of Firmicutes and Bacteroidetes indicators of poultry area contamination were successfully screened, which will be useful for the more convenient monitoring of airborne poultry area contamination.

Non-selective Separation of Bacterial Cells with Magnetic Nanoparticles Facilitated by Varying Surface Charge

Recovering microorganisms from environmental samples is a crucial primary step for understanding microbial communities using molecular ecological approaches. It is often challenging to harvest microorganisms both efficiently and unselectively, guaranteeing a similar microbial composition between original and separated biomasses. A magnetic nanoparticles (MNPs) based method was developed to effectively separate microbial biomass from glass fiber pulp entrapped bacteria. Buffering pH and nanoparticle silica encapsulation significantly affected both biomass recovery and microbial selectivity. Under optimized conditions (using citric acid coated Fe3O4, buffering pH = 2.2), the method was applied in the pretreatment of total suspended particle sampler collected bioaerosols, the effective volume for DNA extraction was increased 10-folds, and the overall method detection limit of microbial contaminants in bioaerosols significantly decreased. A consistent recovery of the majority of airborne bacterial populations was demonstrated by in-depth comparison of microbial composition using 16S rRNA gene high-throughput sequencing. Surface charge was shown as the deciding factor for the interaction between MNPs and microorganisms, which helps developing materials with high microbial selectivity. To our knowledge, this study is the first report using MNPs to separate diverse microbial community unselectively from a complex environmental matrix. The technique is convenient and sensitive, as well as feasible to apply in monitoring of microbial transport and other related fields.

Stabilization of source-separated urine by biological nitrification process: treatment performance and nitrite accumulation.

A laboratory study on nitrification of high-strength source-separated urine was conducted by means of sequencing batch reactors (SBR) and membrane bioreactors (MBR). The highest influent ammonia concentration for SBR and MBR reached more than 2,400 and 1,000 mg N/L, while the maximum pH was about 9 and 8.9, respectively. The ammonia oxidizing efficiency in both SBRs and MBRs was around 50%, which was restrained mainly by the deficiency of alkalinity in bulks. Meanwhile, the nitrite accumulation did also dominate in these two systems, and the major factor to inhibit the nitrite oxidization was thought to be the high free ammonia and free nitrous acid content in bulks. Hence, an ammonia nitrite solution was achieved with concentration ratio of 1:1; after that ammonia oxidation was restrained owing to the deficiency of alkalinity in urine. The temperature and influent ammonia content have no great influence on the nitrification process in both kinds of bioreactors. The nitrification can be progressed under a solids retention time (SRT) longer than 30 d; however, termination of ammonia oxidization was observed as the SRT fell below 20 d. The nitrifier biomass showed an excellent settleability, such that the suspended solids (SS) in effluent was of a low average, about 60 mg/L. This study on the stabilization of human urine will be useful to understand the process of urine separation from source.

Airborne microbial communities in the atmospheric environment of urban hospitals in China

Clinically relevant antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) in bioaerosols have become a greater threat to public health. However, few reports have shown that ARB and ARGs were found in the atmosphere. High-throughput sequencing applied to environmental sciences has enhanced the exploration of microbial populations in atmospheric samples. Thus, five nosocomial bioaerosols were collected, and the dominant microbial and pathogenic microorganisms were identified by high-throughput sequencing in this study. The results suggested that the dominant microorganisms at the genus level were Massilia, Sphingomonas, Methylobacterium, Methylophilus, Micrococcineae, and Corynebacterineae. The most abundant pathogenic microorganisms were Staphylococcus saprophyticus, Corynebacterium minutissimum, Streptococcus pneumoniae, Escherichia coli, Arcobacter butzleri, Aeromonas veronii, Pseudomonas aeruginosa, and Bacillus cereus. The relationship between microbial communities and environmental factors was evaluated with canonical correspondence analysis (CCA). Meanwhile, differences in the pathogenic bacteria between bioaerosols and dust in a typical hospital was investigated. Furthermore, cultivable Staphylococcus isolates with multi-drug resistance phenotype (>3 antibiotics) in the inpatient departments were much higher than those in the transfusion area and out-patient departments, possibly attributed to the dense usage of antibiotics in inpatient departments. The results of this study might be helpful for scientifically air quality control in hospitals.