Mingdong Yi

Vertical structure p-type permeable metal-base organic transistors based on N,N′-diphentyl-N,N′-bis(1-naphthylphenyl)-1,1′-biphenyl-4,4′-diamine

In this article, vertical structure p-type permeable-base organic transistors were proposed and demonstrated. A hole-type organic semiconductor N,N′-diphentyl-N,N′-bis(1-naphthylphenyl)-1,1′-biphenyl-4,4′-diamine was used as emitter and collector. In the permeable-base transistors, the metal base was formed by firstly coevaporating Al and Ca in vacuum and then annealing at 120°C for 5min in air, followed by a thin Al deposition. These devices show a common-base current gain of near 1.0 and a common-emitter current gain of ∼270.

High current density tris(8-hydroxyquinoline) aluminum-based hybrid transistor in vertical architecture

We report the construction of hybrid permeable-base transistors, in vertical architecture, using tris(8-hydroxyquinoline) aluminum as emitter, a thin gold layer as base, and n-type silicon as collector. These transistors present high common-base current gain, can be operated at low driving voltages, and allow high current density.

Copper phthalocyanine based hybrid p-type permeable-base transistor in vertical architecture

We demonstrate the production of copper phthalocyanine (CuPc) based p-type hybrid permeable-base transistors, which operate at low voltages having high common-base current gains. These transistors are prepared by evaporating a thin metal layer (Ag or Al) that acts as base on top of a Si substrate that acts as collector. In the sequence CuPc and Au are thermally sublimated to produce the emitter, constituting a quite simple device production procedure with the additional advantage of allowing higher integration due to its vertical architecture.

High gain in hybrid transistors with BAlq3∕Alq3 isotype heterostructure emitter

We report the fabrication of permeable metal-base transistors based on bis(2-methyl-8-quinolinolato-N1,O8)-(1,1’-biphenyl-4-olato) aluminum (BAlq3)/tri(8-hydroxyquinoline) aluminum (Alq3) isotype heterostructure as emitter layer. In this transistor, n-Si was used as the collector, LiF∕Al as the emitter electrode, and Au∕Al bilayer metal as the base. We show that the leakage current is greatly reduced in Al∕n-Si∕Au∕Al∕BAlq3∕Alq3∕LiF∕Al devices with respect to Al∕n-Si∕Au∕Al∕Alq3∕LiF∕Al devices due to the utilization of BAlq3∕Alq3 isotype heterostructure emitter, leading to high common-base and common-emitter current gains at low driving voltages.

Copper phthalocyanine organic thin-film transistors with calcium fluoride gate insulator

We report the fabrication of organic thin-film transistors (OTFTs) with copper phthalocyanine (CuPc) as the semiconductor and calcium fluoride (CaF2) as the gate dielectric on the glass substrate. The fabricated transistors show a gate voltage dependent carrier field effect mobility that ranges from 0.001 to 0.5 cm2 V−1 s−1. In the devices, the CaF2 dielectric is formed by thermal evaporation; thus OTFTs with a top-gate structure can be fabricated. This provides a convenient way to produce high-performance OTFTs on a large scale and should be useful for the integration of organic displays.