Minserk Cheong

Ether-functionalized ionic liquids as highly efficient SO2 absorbents

Room temperature ionic liquids (RTILs), ether-functionalized imidazolium methanesulfonates, exhibit extremely high SO2 solubility, at least 2 moles of SO2 per mole of RTIL at 30 °C and at atmospheric pressure. The solubility of SO2 in these RTILs increases with increasing number of tethered ether oxygen atoms and also with the pressure rise. FT-IR spectroscopic and quantum mechanical calculation results show that such high SO2 solubility is originated from the combined interactions of SO2 with methanesulfonate anion and ether oxygen atom or atoms on the imidazolium ring. The absorbed SO2 gas can be readily and completely desorbed from the RTILs by heating at 100 °C in a N2 flow, thereby allowing the RTILs to be reused up to 5 cycles without loss of their initial capacity.

Correlation between Hydrogen Bond Basicity and Acetylene Solubility in Room Temperature Ionic Liquids

Room temperature ionic liquids (RTILs) are proposed as the alternative solvents for the acetylene separation in ethylene generated from the naphtha cracking process. The solubility behavior of acetylene in RTILs was examined using a linear solvation energy relationship based on Kamlet-Taft solvent parameters including the hydrogen-bond acidity or donor ability (α), the hydrogen-bond basicity or acceptor ability (β), and the polarity/polarizability (π*). It is found that the solubility of acetylene linearly correlates with β value and is almost independent of α or π*. The solubility of acetylene in RTILs increases with increasing hydrogen-bond acceptor (HBA) ability of the anion, but is little affected by the nature of the cation. Quantum mechanical calculations demonstrate that the acidic proton of acetylene specifically forms hydrogen bond with a basic oxygen atom on the anion of a RTIL. On the other hand, although C-H···π interaction is plausible, all optimized structures indicate that the acidic protons on the cation do not specifically associate with the π cloud of acetylene. Thermodynamic analysis agrees well with the proposed correlation: the higher the β value of a RTIL is, the more negative the enthalpy of acetylene absorption in the RTIL is.

Ionic liquid-assisted carboxylation of amines by CO2: a mechanistic consideration

The catalytic roles of ionic liquids (ILs) in the syntheses of 1,3-disubstituted ureas from the carboxylation of amines by CO(2) were experimentally and theoretically investigated. The carboxylation reaction of n-butylamine was greatly facilitated by the presence of an IL and the catalytic activity of the IL was strongly affected by the nucleophilicity of the anion. Computational study on the mechanistic aspects of the carboxylation with methylamine with or without the presence of an IL, 1-ethyl-3-methylimidazolium chloride, implies that the activation energies of the transition states and the intermediate ionic species could be lowered significantly through the multi-interactions of the carbonyl group of CO(2) with both cations and anions of the ILs.

Steric hindrance-induced zwitterionic carbonates from alkanolamines and CO2: highly efficient CO2 absorbents

Sterically hindered amines such as 2-[(1,1-dimethylethyl)amino]ethanol (TBAE) and 1-[(1,1-dimethylethyl)amino]-2-propanol (TBAP) were found to reversibly interact with CO2 in a 1 : 1 molar ratio exclusively through the hydroxyl group, producing zwitterionic carbonate species, which lose CO2 at considerably lower temperatures than the CO2-adducts of other alkanolamines including monoethanolamine and diethanolamine. The formation of zwitterionic carbonate species from TBAE and TBAP was supported by spectroscopic and computational studies.

Dicarbollylamine Ligand as a Tunable Template for σ,σ- and π,σ-Bonding Modes: Syntheses, Structures, and Theoretical Studies of η5:η1-Coordinated Constrained-Geometry Group 13 Metal Complexes

A series of group 13 main group complexes with pi,sigma-type bonding interaction of the formula [{(eta (5)-RC 2B 9H 9)(CH 2)(eta (1)-NMe 2)}MMe] (M = Al, R = H 5, Me 6; Ga, R = H 7, Me 8; In, R = H 9, Me 10) was produced by the reaction of group 13 metal alkyls (MMe 3; M = Al, Ga, In) with the dicarbollylamine ligands, nido-8-R-7,8-C 2B 9H 10-7-(CH 2)NHMe 2 (R = H 1, Me 2). The reactions of 1 and 2 with AlMe 3 in toluene initially afforded tetra-coordinated aluminum complexes with sigma,sigma-type bonding interaction, [{(eta (1)-RC 2B 9H 10)(CH 2)(eta (1)-NMe 2)}AlMe 2] (R = H 3, Me 4), which readily underwent further methane elimination to yield the corresponding constrained geometry complexes (CGCs, 5 and 6) of aluminum with pi,sigma-bonding interaction. However, the reactions between 1 and 2 and MMe 3 (M = Ga, In) in toluene produced gallium and indium pi,sigma-CGCs of 7 and 10 directly, not proceeding through sigma,sigma-intermediates. The structures of group 13 metal CGCs were established by X-ray diffraction studies of 5, 6, and 8, which authenticated a characteristic eta (5):eta (1)-coordination mode of the dicarbollylamino ligand to the group 13 metals. A similar pi,sigma-bonding interaction was also established in ethylene-bridged dicarbollylethylamine series. Thus, aluminum pi,sigma-CGCs of dicarbollylethylamine, [{(eta (5)-RC 2B 9H 9)(CH 2) 2(eta (1)-NBz 2)}AlMe] (R = H 17, Me 18), were prepared by the trans-metalation of the [{(eta (5)-RC 2B 9H 9)(CH 2) 2(eta (1)-NBz 2)}Ti(NMe 2) 2] (R = H 15, Me 16) with AlMe 3. However, only sigma,sigma-bonded complexes of the formula [{(eta (1)-RC 2B 9H 9)(CH 2) 2(eta (1)-NBz 2)}AlMe 2] (R = H 13, Me 14) were isolated by the reaction between [ nido-7-8-R-7,8-C 2B 9H 10-(CH 2) 2HNBz 2] (R = H 11, Me 12) and AlMe 3. When methane-elimination reactions between metal alkyls and dicarbollylamines were carried out with either the gallium atom or monobenzyl aminoethyl tethered ligands, [ nido-7-H 2NBz(CH 2) 2-8-R-7,8-C 2B 9H 10] (R = H 21, Me 22), desired pi,sigma-CGCs, [{(eta (5)-RC 2B 9H 9)(CH 2) 2(eta (1)-NBz 2)}GaMe] (R = H 19, Me 20) or [{(eta (5)-RC 2B 9H 9)(CH 2) 2(eta (1)-NHBz)}AlMe] (R = H 23, Me 24), were generated, respectively. DFT calculation on 5 provides evidence of existence of pi,sigma-bonding of dicarbollylamine ligand to the aluminum atom: pi-bonding interaction of a dicarbollyl unit becomes intensified in the presence of a weak sigma-bonding amine-tethered group. Furthermore, preference for the formation of pi,sigma-bonding was predicted by optimizing a reaction profile including sigma,sigma- and pi,sigma-structures as well as transition state structures for each methylene- and ethylene-spaced ligand system, 3-5 and 14- 18, to reveal that pi,sigma-bonding interaction is more favorable in the case of a methylene-tethered ligand system.

CO2 Absorption and Desorption in an Aqueous Solution of Heavily Hindered Alkanolamine: Structural Elucidation of CO2-Containing Species

The pathways for the CO2 absorption and desorption in an aqueous solution of a heavily hindered alkanolamine, 2-(t-butylamino)ethanol (TBAE) were elucidated by X-ray crystallographic and (13)C NMR spectroscopic analysis. In the early stage of the CO2 absorption, the formation of carbonate species ([TBAEH]2CO3) was predominant, along with the generation of small amounts of zwitterionic species. With the progress of the absorption, the carbonate species was rapidly transformed into bicarbonate species ([TBAEH]HCO3), and the amounts of the zwitterionic species increased gradually. During desorption at elevated temperature in the absence of CO2, [TBAEH]HCO3 was found to transform into [TBAEH]2CO3, where CO3(2-) strongly interacts with two [TBAEH](+) via hydrogen bondings.

Two‐Dimensional Infrared Correlation Spectroscopy and Principal Component Analysis on the Carbonation of Sterically Hindered Alkanolamines

Despite the academic and industrial importance of the chemical reaction between carbon dioxide (CO(2)) and alkanolamine, the delicate and precise monitoring of the reaction dynamics by conventional one-dimensional (1D) spectroscopy is still challenging, due to the overlapped bands and the restricted static information. Herein, we report two-dimensional infrared correlation spectroscopy (2D IR COS) and principal component analysis (PCA) on the reaction dynamics of a sterically hindered amine, 2-[(1,1-dimethylethyl)amino]ethanol (TBAE) and CO(2). The formation of carbonate rather than carbamate species, which contribute to the unusual high working capacity of ∼1 mole CO(2) per mole of TBAE at 40 °C, occurs through deprotonation of the hydroxyl group, protonation on the nitrogen atom of the amino group, and formation of a carbonate species due to the steric hindrance of the tert-butyl group. In particular, PCA captures the chemical transition into a carbonate species and the main contributions of ν(CO(2)), ν(OH), ν(C - N), and ν(C=O) bands to the carbonation, while 2D IR COS verifies the interrelation of four bands and their changes. Therefore, these results provide a powerful analytic method to understand the complex and abnormal reaction dynamics as well as the rational design strategy for the CO(2) absorbents.

Synthesis of dimethyl carbonate from carbon dioxide over polymer-supported iodide catalysts

Abstract Polymer-supported iodide catalysts are effective heterogeneous catalysts for the synthesis of dimethyl carbonate via carbon dioxide activation in the presence of trimethyl orthoesters.

Absorption and desorption of SO2 in aqueous solutions of diamine-based molten salts

SO2 absorption and desorption behaviors were investigated in aqueous solutions of diamine-derived molten salts with a tertiary amine group on the cation and a chloride anion, including butyl-(2-dimethylaminoethyl)-dimethylammonium chloride ([BTMEDA]Cl, pKb=8.2), 1-butyl-1,4-dimethylpiperazinium chloride ([BDMP]Cl, pKb=9.8), and 1-butyl-4-aza-1-azoniabicyclo[2,2,2]octane chloride ([BDABCO]Cl, pKb=11.1). The SO2 absorption and desorption performance of the molten salt were greatly affected by the basicity of the molten salt. Spectroscopic, X-ray crystallographic, and computational results for the interactions of SO2 with molten salts suggest that two types of SO2-containg species could be generated depending on the basicity of the unquaternized amino group: a dicationic species comprising two different anions, HSO3(-) and Cl(-), and a monocationic species bearing Cl(-) interacting with neutral H2SO3.

Nitrile-functionalized tertiary amines as highly efficient and reversible SO2 absorbents.

Three different types of nitrile-functionalized amines, including 3-(N,N-diethylamino)propionitrile (DEAPN), 3-(N,N-dibutylamino)propionitrile (DBAPN), and N-methyl-N,N-dipropionitrile amine (MADPN) were synthesized, and their SO2 absorption performances were evaluated and compared with those of hydroxy-functionalized amines such as N,N-diethyl-N-ethanol amine (DEEA), N,N-dibutyl-N-ethanol amine (DBEA), and N-methyl-N,N-diethanol amine (MDEA). Absorption-desorption cycle experiments clearly demonstrate that the nitrile-functionalized amines are more efficient than the hydroxy-functionalized amines in terms of absorption rate and regenerability. Computational calculations with DBEA and DBAPN revealed that DBEA bearing a hydroxyethyl group chemically interacts with SO2 through oxygen atom, forming an ionic compound with a covalently bound OSO2(-) group. On the contrary, DBAPN bearing a nitrile group physically interacts with SO2 through the nitrogen and the hydrogen atoms of the two methylene groups adjacent to the amino and nitrile functionalities.