Miquel Gimeno

Structural Characterization of Chitin and Chitosan Obtained by Biological and Chemical Methods

Chitin production was biologically achieved by lactic acid fermentation (LAF) of shrimp waste (Litopenaeus vannameii) in a packed bed column reactor with maximal percentages of demineralization (D(MIN)) and deproteinization (D(PROT)) after 96 h of 92 and 94%, respectively. This procedure also afforded high free astaxanthin recovery with up to 2400 μg per gram of silage. Chitin product was also obtained from the shrimp waste by a chemical method using acid and alkali for comparison. The biologically obtained chitin (BIO-C) showed higher M(w) (1200 kDa) and crystallinity index (I(CR)) (86%) than the chemically extracted chitin (CH-C). A multistep freeze-pump-thaw (FPT) methodology was applied to obtain medium M(w) chitosan (400 kDa) with degree of acetylation (DA) ca. 10% from BIO-C, which was higher than that from CH-C. Additionally, I(CR) values showed the preservation of crystalline chitin structure in BIO-C derivatives at low DA (40-25%). Moreover, the FPT deacetylation of the attained BIO-C produced chitosans with bloc copolymer structure inherited from a coarse chitin crystalline morphology. Therefore, our LAF method combined with FPT proved to be an affective biological method to avoid excessive depolymerization and loss of crystallinity during chitosan production, which offers new perspective applications for this material.

Effect of temperature on chitin and astaxanthin recoveries from shrimp waste using lactic acid bacteria.

The chitin and astaxanthin recoveries by lactic acid fermentation of shrimp wastes (Litopenaeus sp) were conducted in bed-column reactors at 15, 20, 25, 30, 35, 40 and 45 degrees C. The response surface methodology showed that the fermentations carried out in the 27-36 degrees C temperature range with lactic acid above 0.319 mmol/g resulted in the highest demineralization. The maximal deproteinizations were attained from 30 to 40 degrees C. The extraction of free-astaxanthin did not present significant differences between 20 and 35 degrees C and the proportion of cis-stereoisomer forms increased with temperature. The growth rates of Lactobacillus plantarum were estimated in the 15-45 degrees C range and analyzed by Arrhenius and square root models. The cardinal values were 3.94 and 51.7 degrees C for minimum and maximum temperatures, respectively, with activation energy of 43.38 Jmol(-1).

Ultrasonication and steam-explosion as chitin pretreatments for chitin oligosaccharide production by chitinases of Lecanicillium lecanii

In this study, chitin oligosaccharides have been successfully produced using chitinases from submerged fermentation of Lecanicillium lecanii. The highest Hex, Chit and Prot production was 0.14, 0.26 and 2.05 U/mg of protein, respectively, which were attained varying pH from 5 to 8 after 96 h. Culture conditions conducted at constant pH of 6 resulted in significantly lower enzyme production. The crude enzyme was partially purified by salting out with (NH4)2SO4 followed by size exclusion chromatography to isolate the chitinase mixture for further chitin hydrolysis assays. In this regard, chitin substrates were pretreated with sonication and steam explosion prior to enzymatic reaction. Structural changes were observed with steam explosion with 11.28% reduction of the crystallinity index attained with the lowest chitin/water ratio (0.1g/mL). Pretreated chitins reached the highest production of reducing sugars (0.37 mg/mL) and GlcNAc (0.59 mg/mL) in 23.6% yield.

Chitosan-based microcapsules containing grapefruit seed extract grafted onto cellulose fibers by a non-toxic procedure

A novel non-toxic procedure is described for the grafting of chitosan-based microcapsules containing grapefruit seed oil extract onto cellulose. The cellulose was previously UV-irradiated and then functionalized from an aqueous emulsion of the chitosan with the essential oil. The novel materials are readily attained with durable fragrance and enhanced antimicrobial properties. The incorporation of chitosan as determined from the elemental analyses data was 16.08+/-0.29 mg/g of sample. Scanning electron microscopy (SEM) and gas chromatography-mass spectroscopy (GC-MS) provided further evidence for the successful attachment of chitosan microcapsules containing the essential oil to the treated cellulose fibers. The materials thus produced displayed 100% inhibition of Escherichia coli and Staphylococcus epidermidis up to 48 h of incubation. Inhibition of bacteria by the essential oil was also evaluated at several concentrations.

Lipase-catalyzed synthesis of hyperbranched poly-L-lactide in an ionic liquid

Hyperbranched poly-l-lactides have been synthesized by eROP in [C4MIM][PF6] media. The bis(hydroxymethyl)butyric acid molecule was used as the AB2 core co-monomer and immobilized lipase B from Candida antarctica as biocatalyst. The degree of branching could be controlled by the reaction conditions, with the maximum achieved being 0.21. The successful achievement of the hyperbranched structure is attributed to the high solvent power of substrates and products in the ionic liquid besides sustained lipase activity.

Enzymatic synthesis of poly-l-lactide-co-glycolide in the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate

This article reports the lipase-catalyzed ring-opening copolymerization of l-lactide (LLA) and glycolide using the commercially available ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate as solvent media. Candida antarctica lipase B, immobilized in an acrylic support was used as biocatalyst. The reaction temperature had a direct influence on yields and molecular weights of the copolymers as well as LLA incorporation. The materials presented semi-crystalline structures assessed by DSC and powder XR diffraction analyses.

Enzymatic hydrolysis of chitin pretreated by rapid depressurization from supercritical 1,1,1,2-tetrafluoroethane toward highly acetylated oligosaccharides.

The hydrolysis of chitin treated under supercritical conditions was successfully carried out using chitinases obtained by an optimized fermentation of the fungus Lecanicillium lecanii. The biopolymer was subjected to a pretreatment based on suspension in supercritical 1,1,1,2-tetrafluoroethane (scR134a), which possesses a critical temperature and pressure of 101°C and 40bar, respectively, followed by rapid depressurization to atmospheric pressure and further fibrillation. This methodology was compared to control untreated chitins and chitin subjected to steam explosion showing improved production of reducing sugars (0.18mg/mL), enzymatic hydrolysis and high acetylation (FA of 0.45) in products with degrees of polymerization between 2 and 5.

Inhibition of Listeria monocytogenes in Fresh Cheese Using Chitosan-Grafted Lactic Acid Packaging

A chitosan from biologically obtained chitin was successfully grafted with d,l-lactic acid (LA) in aqueous media using p-toluenesulfonic acid as catalyst to obtain a non-toxic, biodegradable packaging material that was characterized using scanning electron microscopy, water vapor permeability, and relative humidity (RH) losses. Additionally, the grafting in chitosan with LA produced films with improved mechanical properties. This material successfully extended the shelf life of fresh cheese and inhibited the growth of Listeria monocytogenes during 14 days at 4 °C and 22% RH, whereby inoculated samples with chitosan-g-LA packaging presented full bacterial inhibition. The results were compared to control samples and commercial low-density polyethylene packaging.

Chemoenzymatic synthesis of polypeptides in neat 1,1,1,2-tetrafluoroethane solvent

Chemoenzymatic polypeptide synthesis offers several advantages over chemical or other biological routes, however, the use of aqueous-based media suffers from reverse hydrolysis reactions that challenge peptide chain propagation. Herein, the protease from subtilisin Carlsberg biocatalyzed the synthesis of poly-L-PheOEt, poly-L-LeuOEt, and the copolymers poly-L-PheOEt-co-L-LeuOEt from their amino acid ethyl ester substrates in a neat liquid 1,1,1,2-tetrafluoroethane solvent. The products, achieved in acceptable yields (ca. 50%), were fully characterized showing relatively high molar mass (ca. 20 000 Da for poly-L-PheOEt). This non-toxic low-boiling hydrofluorocarbon enhances enzymatic peptide propagation by limiting hydrolysis owing to its hydrophobic and relatively polar characteristics that sustain the protease activity and solubilize substrates and products. Computational molecular dynamic calculations were used to assess the L-PheOEt/L-LeuOEt-solvent and polypeptide-solvent interactions in this system. Additionally, the homopolypeptides displayed higher crystallinity than the copolypeptides with random incorporation of amino acid ethyl esters, notwithstanding the significantly highest specificity for Phe in this system. Interestingly, secondary structure characterization of the products by FTIR and circular dichroism suggests a non-common peptide folding.

Production and characterization of a nanocomposite of highly crystalline nanowhiskers from biologically extracted chitin in enzymatic poly(ε-caprolactone)

A nano-composite from biologically obtained chitin nanofillers homogenously dispersed in a poly(ε-caprolactone) matrix was successfully achieved by an ultrasonication-assisted non-toxic and non-aqueous methodology. For this purpose, biological chitin was obtained from lactic acid fermentation of shrimp wastes and converted into chitin whiskers by acidic hydrolysis in a novel process at low temperature (4°C) that enhanced the distribution and yield. Additionally, the polyester matrix was enzymatically produced in a non-toxic compressed fluid (1,1,1,2-tetrafluoroethane at 25bar and 65°C) medium. The homogeneous distribution of the nanofiller in the matrix was corroborated by confocal and atomic force microscopies. Films of the nanocomposite were physicochemically characterized to assess its adequate properties. Additionally, the qualitative viability of human fibroblasts and osteoblasts cells was studied on the produced nanocomposite films showing good biocompatibility.