Miria Finckenor
Marshall Space Flight Center
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Miria Finckenor.
PROTECTION OF MATERIALS AND STRUCTURES FROM SPACE ENVIRONMENT: Proceedings of the#N#9th International Conference: Protection of Materials and Structures From Space#N#Environment | 2009
J. I. Kleiman; Z. Iskanderova; V. Issoupov; A. V. Grigorevskiy; L. V. Kiseleva; Miria Finckenor; S. F. Naumov; S. P. Sokolova; A. O. Kurilenok
An international program on comparative evaluation of space durability of thermal control paints from a number of countries was initiated a few years ago at ITL with coatings from Russia, France and USA being studied. This paper describes the results of the study on space durability of three types of charge‐dissipative and conductive Russian advanced polymer‐based EKOM thermal control paints. Extensive ground‐based testing in fast atomic oxygen (FAO) beam facilities was used to test the space durability of these paints and the enhancement of their atomic oxygen erosion resistance by a surface modification technology, Photosil™. All pristine EKOM paints were also tested in a direct materials exposure experiment on Russian module “Zvezda” onboard the International Space Station.Space durability and change of the major physical properties were evaluated after these experiments using a number of analytical techniques. Both, the ground‐based testing and the flight experiments indicated signs of surface erosion...
Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control | 2004
Carlos Soares; Ronald Mikatarian; Danny Schmidl; Miria Finckenor; Michael J. Neish; Kichiro Imagawa; Magdeleine Dinguirard; Marc Van Eesbeek; S. F. Naumov; A. N. Krylov; L. V. Mishina; Y. I. Gerasimov; S. P. Sokolova; A. O. Kurilyonok; N. G. Alexandrov; T. N. Smirnova
This paper presents an overview of International Space Station (ISS) on-orbit environments exposure flight experiments. International teams are flying, or preparing to fly, externally mounted materials exposure trays and sensor packages. The samples in these trays are exposed to a combination of induced molecular contamination, ultraviolet radiation, atomic oxygen, ionizing radiation, micrometeoroids and orbital debris. Exposed materials samples are analyzed upon return. Typical analyses performed on these samples include optical property measurements, X-ray photo spectroscopy (XPS) depth profiles, scanning electron microscope (SEM) surface morphology and materials properties measurements. The objective of these studies is to characterize the long-term effects of the natural and induced environments on spacecraft materials. Ongoing flight experiments include the U.S. Materials International Space Station Experiment (MISSE) program, the Japanese Micro-Particles Capturer and Space Environment Exposure Device (SM/MPAC&SEED) experiment, the Russian SKK and Kromka experiments from RSC-Energia, and the Komplast flight experiment. Flight experiments being prepared for flight, or in development stage, include the Japanese Space Environment Data Acquisition Attached Payload (SEDA-AP), the Russian BKDO monitoring package from RSC-Energia, and the European Materials Exposure and Degradation Experiment (MEDET). Results from these ISS flight experiments will be crucial to extending the performance and life of long-duration space systems such as Space Station, Space Transportation System, and other missions for Moon and Mars exploration.
PROTECTION OF MATERIALS AND STRUCTURES FROM SPACE ENVIRONMENT: Proceedings of the#N#9th International Conference: Protection of Materials and Structures From Space#N#Environment | 2009
Miria Finckenor
Many different passive thermal control materials were flown as part of the Materials on International Space Station Experiment, including inorganic coatings, anodized aluminum, and multi‐layer insulation materials. These and other material samples were exposed to the low Earth orbital environment of atomic oxygen, ultraviolet radiation, thermal cycling, and hard vacuum, though atomic oxygen exposure was limited for some samples. Materials flown on MISSE‐1 and MISSE‐2 were exposed to the space environment for nearly four years. Materials flown on MISSE‐3, MISSE‐4, and MISSE‐5 were exposed to the space environment for one year.Solar absorptance, infrared emittance, and mass measurements indicate the durability of these materials to withstand the space environment. Effects of short duration versus long duration exposure on ISS are explored, as well as comparable data from previous flight experiments, such as the Passive Optical Sample Assembly (POSA), Optical Properties Monitor (OPM), and Long Duration Expos...
43rd AIAA Aerospace Sciences Meeting and Exhibit | 2005
Paul Boeder; Ron Mikatarian; Steve Koontz; Keith Albyn; Miria Finckenor
The International Space Station (ISS) solar arrays utilize MD-944 diode tape to protect the underlying diodes in the solar array panel circuit and also provide thermal conditioning and mechanical support. The diode tape consists of silicone pressure sensitive adhesive (Dow Coming QC-7725) with a protective Kapton over-layer. On-orbit, the Kapton over-layer will erode under exposure to atomic oxygen (AO) and the underlying exposed silicone adhesive will ultimately convert, under additional AO exposure, to a glass like silicate. The current operational plan is to retract ISS solar array P6 and leave it stored under load for a long duration (6 months or more) during ISS assembly. With the Kapton over-layer eroded away, the exposed silicone adhesive must not cause the solar array to stick to itself or cause the solar array to fail during redeployment. Previous testing by Lockheed-Martin Space Systems (LMSS) characterized silicone blocking following exposure to low energy atomic oxygen (AO) in an asher facility, but this is believed to be conservative. An additional series of tests was performed by the Environmental Effects Group at MSFC under direction from the ISS Program Office Environments Team. This test series included high energy AO (5 eV), near ultraviolet (NUV) radiation and ionizing radiation, singly and in combination. Additional samples were exposed to thermal energy AO (<0.1 ev) for comparison to the LMSS tests. Diode tape samples were exposed to each environment constituent individually, put under preload for seven days and then the resulting blocking force was measured using a tensile machine. Additional samples were exposed to AO, NUV and electrons in series and then put under long term (three to ten months) preload to determine the effect of preload duration on the resulting blocking force of the silicone-to-silicone bond. Test results indicate that high energy AO, ultraviolet radiation and electron ionizing radiation exposure all reduce the blocking force for a silicone-to-silicone bond. AO exposure produces the most significant reduction in blocking force.
Advanced Optical Materials | 2013
Hilal Cansizoglu; Mehmet F. Cansizoglu; Miria Finckenor; Tansel Karabacak
42nd AIAA Aerospace Sciences Meeting and Exhibit | 2004
Jasha Jacob Kleiman; Yuri Gudimenko; Zelina Iskanderova; A. Grigorevski; Miria Finckenor; David L. Edwards
European Polymer Journal | 2017
Xiaobing Li; Ahmed Al-Ostaz; Mohammed Jaradat; Farzin Rahmani; Sasan Nouranian; Grace Rushing; Alharith Manasrah; Hunain Alkhateb; Miria Finckenor; Joseph Lichtenhan
Archive | 2003
Y. Gudimenko; Raymond Ng; Jacob I. Kleiman; Z. A. Iskanderova; R. C. Tennyson; Patrick Hughes; David Milligan; A. Grigorevski; M. Shuiski; L. V. Kiseleva; David G. Edwards; Miria Finckenor
Archive | 2006
Paul Boeder; Ron Mikatarian; Mary J. Lorenz; Steve Koontz; Keith Albyn; Miria Finckenor
Archive | 2016
Jan Rogers; Miria Finckenor; Mary Nehls