Miriam Diamond

Contaminants in the Canadian Arctic: 5 years of progress in understanding sources, occurrence and pathways

Recent studies of contaminants under the Canadian Northern Contaminants Program (NCP) have substantially enhanced our understanding of the pathways by which contaminants enter Canadas Arctic and move through terrestrial and marine ecosystems there. Building on a previous review (Barrie et al., Arctic contaminants: sources, occurrence and pathways. Sci Total Environ 1992:1-74), we highlight new knowledge developed under the NCP on the sources, occurrence and pathways of contaminants (organochlorines, Hg, Pb and Cd, PAHs, artificial radionuclides). Starting from the global scale, we examine emission histories and sources for selected contaminants focussing especially on the organochlorines. Physical and chemical properties, transport processes in the environment (e.g. winds, currents, partitioning), and models are then used to identify, understand and illustrate the connection between the contaminant sources in industrial and agricultural regions to the south and the eventual arrival of contaminants in remote regions of the Arctic. Within the Arctic, we examine how contaminants impinge on marine and terrestrial pathways and how they are subsequently either removed to sinks or remain where they can enter the biosphere. As a way to focus this synthesis on key concerns of northern residents, a number of special topics are examined including: a mass balance for HCH and toxaphene (CHBs) in the Arctic Ocean; a comparison of PCB sources within Canadas Arctic (Dew Line Sites) with PCBs imported through long-range transport; an evaluation of concerns posed by three priority metals--Hg, Pb and Cd; an evaluation of the risks from artificial radionuclides in the ocean; a review of what is known about new-generation pesticides that are replacing the organochlorines; and a comparison of natural vs. anthropogenic sources of PAH in the Arctic. The research and syntheses provide compelling evidence for close connectivity between the global emission of contaminants from industrial and agricultural activities and the Arctic. For semi-volatile compounds that partition strongly into cold water (e.g. HCH) we have seen an inevitable loading of Arctic aquatic reservoirs. Drastic HCH emission reductions have been rapidly followed by reduced atmospheric burdens with the result that the major reservoir and transport agent has become the ocean. In the Arctic, it will take decades for the upper ocean to clear itself of HCH. For compounds that partition strongly onto particles, and for which the soil reservoir is most important (e.g. PCBs), we have seen a delay in their arrival in the Arctic and some fractionation toward more volatile compounds (e.g. lower-chlorinated PCBs). Despite banning the production of PCB in the 1970s, and despite decreases of PCBs in environmental compartments in temperate regions, the Arctic presently shows little evidence of reduced PCB loadings. We anticipate a delay in PCB reductions in the Arctic and environmental lifetimes measured in decades. Although artificial radionuclides have caused great concern due to their direct disposal on Russian Shelves, they are found to pose little threat to Canadian waters and, indeed, much of the radionuclide inventory can be explained as remnant global fallout, which was sharply curtailed in the 1960s, and waste emissions released under license by the European reprocessing plants. Although Cd poses a human dietary concern both for terrestrial and marine mammals, we find little evidence that Cd in marine systems has been impacted by human activities. There is evidence of contaminant Pb in the Arctic, but loadings appear presently to be decreasing due to source controls (e.g. removal of Pb from gasoline) in Europe and North America. Of the metals, Hg provokes the greatest concern; loadings appear to be increasing in the Arctic due to global human activities, but such loadings are not evenly distributed nor are the pathways by which they enter and move within the Arctic well understood.

Application of the QWASI (Quantitative Water Air Sediment Interaction) fugacity model to the dynamics of organic and inorganic chemicals in lakes

Abstract A brief description is presented of the QWASI fugacity model which describes the fate of a chemical in a lake system consisting of water, bottom and suspended sediments, and air. Descriptions of the processes included in the model are advective flow, volatilization, sediment deposition, resuspension and burial, sediment-water diffusion, wet and dry atmospheric deposition, and degrading reactions. The steady state solution of the model is illustrated by application to PCBs in Lake Ontario using the equilibrium criterion of fugacity as the variable controlling environmental fate of the chemical. Use of fugacity as an equilibrium criterion is not suitable for involatile chemicals, such as metals, or ionic species, because fugacities are calculated from a basis of vapor phase concentrations. For metals and ions with zero or negligible vapor pressure, the use of the equilibrium criterion of activity is more appropriate since activities are calculated from a water phase base. It is, however, suggested that a new equilibrium criterion, termed the “aquivalent” concentration is preferable. It has the advantage that, with minor modifications, the formalism developed in the QWASI approach can be applied, with its attendant benefits of mathematical simplicity and the ability to readily compare equations can be assembled and solved. This criterion is illustrated by applying it on a steady state basis to the PCB example and to the fate of lead in Lake Ontario.

Estimation of PCB stocks, emissions, and urban fate: will our policies reduce concentrations and exposure?

PCBs, used to manage risks from the flammability of dielectric fluids and to increase the durability of elastic sealants, had declining environmental concentrations after legislation banning new production was passed during the 1970s and 1980s in Europe and North America. To answer why PCB temporal trends are now nearly stable and if current policies will further reduce concentrations and our exposure, we estimated PCB stocks in Toronto, Canada (population of approximately 2.5 million) of 437 (282-796) tonnes, of which 97 and 3% are in closed sources and building sealants, respectively. The greatest geographic density of PCBs is downtown, specifically in commercial, electricity-intensive skyscrapers. An unknown stock is within now-buried landfills and other waste-handling facilities as well as diffuse sources such as electrical wiring and paints. Using the Multimedia Urban Model, we estimated city-wide emissions of approximately 0.14-1.4 mg m(-2) y(-1) or 35-350 mg capita(-1) y(-1) of SigmaPCB(70), which is approximately 0.01-0.3% annually of total documented stocks. Canada, as one of 159 signatories of the Stockholm Convention and the 35 parties that have reported progress toward environmentally sound management of their PCB inventories by 2028, has passed national legislation with a timetable of inventory reductions. It is unclear whether this legislation will successfully reduce concentrations and exposures, however the analysis should inform our management of other contaminants.

Accumulation of metals, trace elements and semi-volatile organic compounds on exterior window surfaces in Baltimore

Organic films have been found to develop on window surfaces [Diamond et al., Environmental Science and Technology 34 (2000a) 2900]. The film contains organic compounds that are in dynamic equilibrium with the gas-phase in air, and organic and inorganic compounds and elements associated with deposited air particles. In this study, the exterior surfaces of windows were sampled in downtown and suburban Baltimore, Maryland. Higher concentrations of PCBs, PAH, metals and trace elements were found at downtown than a suburban site. PCBs in the films at downtown sites were dominated by penta and hexa homologue groups and PAH signatures resembled that of vehicle emissions. Twenty-six metals and trace elements were separated into two groups according to their enrichment factors (EF). Ag, Hg, Se, Sb and Zn had EF > 100, suggesting anthropogenic sources of these metals in the films; whereas Fe, Ca, Co, Cr and others had EF <10, suggesting a crustal origin. An unusual profile dominated by deca- and nona- PCBs and relatively higher concentrations of Ag, Hg and Zn may be attributable to emissions from a medical waste incinerator. Dry deposition fluxes of selected metals on windows were 1.4-94 times higher on windows with than without films, indicating that the film increases the dry deposition of particles and their associated chemicals. This implies that film development, which is associated with elevated VOC and SOC emissions to urban air, will increase film development that will, in turn, increase the accumulation of other atmospherically deposited constituents such as metals.

Sources, Emissions, and Fate of Polybrominated Diphenyl Ethers and Polychlorinated Biphenyls Indoors in Toronto, Canada

Indoor air concentrations of polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) measured in 20 locations in Toronto ranged 0.008-16 ng·m(-3) (median 0.071 ng·m(-3)) and 0.8-130.5 ng·m(-3) (median 8.5 ng·m(-3)), respectively. PBDE and PCB air concentrations in homes tended to be lower than that in offices. Principal component analysis of congener profiles suggested that electrical equipment was the main source of PBDEs in locations with higher concentrations, whereas PUF furniture and carpets were likely sources to locations with lower concentrations. PCB profiles in indoor air were similar to Aroclors 1248, 1232, and 1242 and some exterior building sealant profiles. Individual PBDE and PCB congener concentrations in air were positively correlated with colocated dust concentrations, but total PBDE and total PCB concentrations in these two media were not correlated. Equilibrium partitioning between air and dust was further examined using log-transformed dust/air concentration ratios for which lower brominated PBDEs and all PCBs were correlated with K(OA). This was not the case for higher brominated BDEs for which the measured ratios fell below those based on K(OA) suggesting the air-dust partitioning process could be kinetically limited. Total emissions of PBDEs and PCBs to one intensively studied office were estimated at 87-550 ng·h(-1) and 280-5870 ng·h(-1), respectively, using the Multimedia Indoor Model of Zhang et al. Depending on the air exchange rate, up to 90% of total losses from the office could be to outdoors by means of ventilation. These results support the hypotheses that dominant sources of PBDEs differ according to location and that indoor concentrations and hence emissions contribute to outdoor concentrations due to higher indoor than outdoor concentrations along with estimates of losses via ventilation.

Concentrations and chiral signatures of POPs in soils and sediments: A comparative urban versus rural study in Canada and UK

Surface soils and sediments were collected in Toronto, Canada to investigate the concentrations and enantiomeric signatures of urban versus rural locations. Samples were analyzed for polychlorinated biphenyls (PCBs), polyaromatic hydrocarbons (PAHs) and organochlorine pesticides (OCs). In soils, the sum of 10 PCB congeners (Sigma PCB 28, 52, 95, 101, 118, 136, 138, 149, 153, 180) and 15 PAHs (Sigma PAHs) ranged from 0.76-58 to 58-3200 ng g(-1), respectively. The most abundant OCs detected were DDTs, followed by chlordanes and endosulfans. Sigma PAHs exhibited an urban-rural gradient of up to 60 times but a gradient was not observed for Sigma PCBs and OCs which may reflect local sources of these chemicals. In sediments, Sigma PCBs and Sigma PAHs ranged from 0.03-23 ng g(-1) to 42-3300 ng g(-1), respectively. Sigma PCBs, Sigma PAHs, chlordanes and DDTs exhibited weak urban-rural gradients. Chiral signatures of PCB 95, 136, 149, trans-chlordane (TC), cis-chlordane (CC) and o,p-DDT were characterized to study the enantiomeric degradation in urban versus rural areas and its relation to contaminant levels. Supplementary to these data, we also report on the chiral signatures of PCBs in UK lake sediments from a variety of urban and rural locations. The extent of enantiomeric degradation was expressed as the enantiomeric excess (EE%) which is defined as 100x(E1-E2)/(E1+E2), where E1 is always the most abundant enantiomer and E2 is the least abundant enantiomer. The EE% of PCB 149 in the UK sediments was negatively correlated (p<0.05) with Sigma PAHs suggesting either more recent emissions of this PCB congener in the more contaminated urban locations and hence a more racemic signature or less enantiomeric degradation of the congener in more contaminated urban soils. However, no significant correlation was observed between EE% of any of the chiral chemicals and contaminant levels in the Toronto soils.

Polychlorinated biphenyls in domestic dust from Canada, New Zealand, United Kingdom and United States: Implications for human exposure

Ingestion of indoor dust has been highlighted as an important pathway of exposure to brominated flame retardants. Hence, polychlorinated biphenyls (PCBs) were determined in indoor dust from homes in Amarillo/Austin, TX, USA (n=20; median concentration=200 ng Sigma PCB g(-1)); Birmingham, UK (n=20; 48 ng Sigma PCB g(-1)); Toronto, Canada (n=10; 260 ng Sigma PCB g(-1)); and Wellington, New Zealand (n=20; 46 ng Sigma PCB g(-1)). Concentrations in Canadian and US samples were statistically indistinguishable, but exceeded significantly (p<0.05) those in both New Zealand and UK dust. Principal component analysis revealed that while UK samples were enriched comparatively in lower molecular weight congeners; samples from other countries contained proportionally more mid-to-high molecular weight congeners. Concentrations of PCBs determined in air from the same 10 Canadian homes showed concentrations (median=4.9 ng Sigma PCB m(-3)) higher than those reported previously for UK homes (1.8 ng Sigma PCB m(-3)). Interpretation of these data alongside that for dietary exposure from other studies suggest that indoor exposures (i.e. air and dust combined) may be a significant contributor to overall exposure for the majority of the population - ranging from 4.3% to 87% in adults and 1.6-73% in toddlers. While inhalation is the principal indoor pathway under a typical dust ingestion scenario, exposure via dust ingestion exceeds that from either inhalation or diet for a small proportion of North American toddlers.

Stocks and flows of PBDEs in products from use to waste in the U.S. and canada from 1970 to 2020

The time-dependent stock of PBDEs contained in in-use products (excluding building materials and large vehicles) was estimated for the U.S. and Canada from 1970 to 2020 based on product consumption patterns, PBDE contents, and product lifespan. The stocks of penta- and octaBDE peaked in in-use products at 17,000 (95% confidence interval: 6000-70,000) and 4,000 (1,000-50,000) tonnes in 2004, respectively, and for decaBDE at 140,000 (40,000-300,000) tonnes in 2008. Products dominating PBDE usage were polyurethane foam used in furniture (65% of pentaBDE), casings of electrical and electronic equipment or EEE (80% of octaBDE), and EEE and automotive seating (35% of decaBDE for each category). The largest flow of PBDEs in products, excluding automotive sector, to the waste phase occurred between 2005 and 2008 at ∼10,000 tonnes per year. Total consumption of penta-, octa-, and decaBDE from 1970 to 2020 in products considered was estimated at ∼46,000, ∼25,000, and ∼380,000 tonnes, respectively. Per capita usage was estimated at 10-250, 10-150, and 200-2000 g·capita(-1)·y(-1) for penta-, octa-, and decaBDE, respectively, over the time span. Considering only the first use (no reuse and/or storage) of PBDE-containing products, approximately 60% of the stock of PBDEs in 2014 or ∼70,000 tonnes, of which 95% is decaBDE, will remain in the use phase in 2020. Total emissions to air of all PBDEs from the in-use product stock was estimated at 70-700 tonnes between 1970 and 2020, with annual emissions of 0.4-4 tonnes·y(-1) for each of penta- and octaBDE and 0.35-3.5 tonnes·y(-1) for decaBDE in 2014.

PCBs, PBDEs, and PAHs in Toronto air: Spatial and seasonal trends and implications for contaminant transport

The distributions of polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), and polycyclic aromatic hydrocarbons (PAHs) in the atmosphere of Toronto, Canada and the surrounding suburban/rural area were examined. A series of temporally- and spatially-distributed air samples was collected over a 1-year period with a high-volume active air sampler at one downtown site and polyurethane foam passive air samplers at 19 sites. Passive sampler air concentrations of ΣPAHs ranged from 0.27 to 51 ng/m³. Concentrations of ΣPCBs ranged from 6.0 to 1300 pg/m³, and concentrations of ΣPBDEs ranged from 0.47 to 110 pg/m³. All compounds exhibited the highest concentrations in the urban core, and lowest concentrations in the surrounding rural areas, however the exact ratio depended on location since concentrations varied considerably within the city. Results from the application of a radial dilution model highlighted the influence of the central business district (CBD) of the city as a source of contaminants to the surrounding environment, however the radial dilution comparison also demonstrated that sources outside the CBD have a significant influence on regional contaminant concentrations. A strong relationship between temperature and partial pressure of the gas-phase PCBs, low molecular weight PBDEs and less-reactive PAHs suggested that their dominant emissions originated from temperature-controlled processes such as volatilization from local sources of PCBs, PAHs and PBDEs at warm temperatures, condensation and deposition of emissions at cold temperatures, and ventilation of indoor air with elevated concentrations. The relationship between temperature and atmospheric PAH concentrations varied along the urban-rural gradient, which suggested that in highly urbanized areas, such as downtown Toronto, temperature-related processes have a significant impact on air concentrations, whereas winter emissions from domestic heating have a greater influence in areas with less impervious surface coverage.

Risks and benefits of consumption of great lakes fish

Background: Beneficial effects of fish consumption on early cognitive development and cardiovascular health have been attributed to the omega-3 fatty acids in fish and fish oils, but toxic chemicals in fish may adversely affect these health outcomes. Risk–benefit assessments of fish consumption have frequently focused on methylmercury and omega-3 fatty acids, not persistent pollutants such as polychlorinated biphenyls, and none have evaluated Great Lakes fish consumption. Objectives: The risks and benefits of fish consumption have been established primarily for marine fish. Here, we examine whether sufficient data are available to evaluate the risks and benefits of eating freshwater fish from the Great Lakes. Methods: We used a scoping review to integrate information from multiple state, provincial, and federal agency sources regarding the contaminants and omega-3 fatty acids in Great Lakes fish and fish consumers, consumption rates and fish consumption advisories, and health effects of contaminants and omega-3 fatty acids. Data synthesis: Great Lakes fish contain persistent contaminants—many of which have documented adverse health effects —that accumulate in humans consuming them. In contrast, data are sparse on omega-3 fatty acids in the fish and their consumers. Moreover, few studies have documented the social and cultural benefits of Great Lakes fish consumption, particularly for subsistence fishers and native communities. At this time, federal and state/provincial governments provide fish consumption advisories based solely on risk. Conclusions: Our knowledge of Great Lakes fish has critical gaps, particularly regarding the benefits of consumption. A risk–benefit analysis requires more information than is currently available on the concentration of omega-3 fatty acids in Great Lakes fish and their absorption by fish eaters in addition to more information on the social, cultural, and health consequences of changes in the amount of fish consumed.