Mirosław Topol

The Aberrant Right Subclavian Artery (Arteria Lusoria): The Morphological and Clinical Aspects of One of the Most Important Variations—A Systematic Study of 141 Reports

The most important abnormality of the aortic arch is arguably the presence of an aberrant right subclavian artery (arteria lusoria). If this vessel compresses the adjacent structures, several symptoms may be produced. The aim of the study is to present the morphological and clinical aspects of the aberrant right subclavian artery. Three different databases searched for a review of pertinent literature using strictly predetermined criteria. Of 141 cases, 15 were cadaveric and 126 were clinically documented. The gender distribution of the subjects was 55.3% female and 44.7% male. The mean age of the patients at symptoms onset was 49.9 ± 19.4 years for all patients but 54.0 ± 19.6 years and 44.9 ± 18.1 years for female and male subjects, respectively (P = 0.0061). The most common symptoms in this group were dysphagia (71.2%), dyspnea (18.7%), retrosternal pain (17.0%), cough (7.6%), and weight loss (5.9%). The vascular anomalies coexisting with an arteria lusoria were truncus bicaroticus (19.2%), Kommerells diverticulum (14.9%), aneurysm of the artery itself (12.8%), and a right sided aortic arch (9.2%). In conclusion, compression of adjacent structures by an aberrant right subclavian artery needs to be differentiated from other conditions presenting dysphagia, dyspnea, retrosternal pain, cough, and weight loss.

The right accessory hepatic artery; a case report and review of the literature

A rare case of the right accessory hepatic artery was observed during multidetector-row Computer Tomography examination in a 65-year-old Caucasian female with portal vein thrombosis. This artery arose from the common hepatic artery near the celiac trunk and ran behind the hepatic portal vein to the right lobe of the liver. The diameter of the right accessory hepatic artery when compared to the diameter of the proper hepatic and common hepatic arteries corroborated the functional importance of this vessel. In-depth knowledge of not only “standard” anatomy but also of the numerous angiological variants is necessary in clinical practice. The variation shown in our case has very rarely been reported in medical literature.

Fenestration and duplication of the vertebral artery: the anatomical and clinical points of view.

The vertebral artery (VA) acts as a foundation for the posterior circulation of the head and neck. It presents a number of anomalies that can be easily visualized thanks to modern imaging techniques, such as MR and CT angiography or color Doppler ulrasonography. Determining the appropriate terminology for those anomalies can be sometimes more challenging than their recognition. One particular challenge concerns the differentiation betweenVA fenestration and duplication. Because of the different clinical prognoses associated with those anomalies, confusion should be avoided. Knowledge of the morphological anomalies associated with the VA is important for both radiologists and head and neck surgeons, because any injury to the VA can result in a threat to the vascular supply of the brain stem, the cerebral or cerebellar hemispheres, the thalamus, cervical nerve roots and particularly the lateral medulla (Wallenbergs syndrome). This article analyses world literature concerning the issue of VA fenestration and duplication to facilitate a differential diagnosis. Clin. Anat. 26:933–943, 2013.

A proposal for classification of the superior transverse scapular ligament: variable morphology and its potential influence on suprascapular nerve entrapment

BACKGROUND The suprascapular region is the most common site of suprascapular nerve entrapment. The aim of the present study was to determine the morphologic variation of the superior transverse scapular ligament (STSL) and measure the reduction in size of the suprascapular opening. Other structures that might be potentially significant during open and arthroscopic procedures in this region are also described. MATERIALS AND METHODS The study used 86 randomized formalin-fixed human cadaveric shoulders. After dissection of the suprascapular region, the following measurements were defined and collected for every STSL: length, proximal width, distal width, and thickness at the proximal and distal ends. Measurements were also taken of the area of the suprascapular opening (aSSO) and the middle width of the suprascapular opening (mwSSO). RESULTS Three types of STSL may be distinguished: a fan-shaped type (54.6%), a band-shaped type (41.9%), and a bifid type (3.5%). Statistically significant differences between the specimens with fan-shaped and band-shaped types of STSL were observed in aSSO and mwSSO of the suprascapular opening. Anterior coracoscapular ligaments (ACSL) were present in 44 of 86 shoulders. The aSSO and mwSSO were smaller in specimens with an ACSL than in those without; however, this difference was only significant in the band-shaped type of STSL. CONCLUSION Knowledge of the morphologic variations of STSL presented in this study is important for better understanding the possible anatomic conditions that can promote suprascapular nerve entrapment and should be taken into particular consideration during surgical and arthroscopic procedures around the suprascapular notch.

The double suprascapular foramen: unique anatomical variation and the new hypothesis of its formation

A unique anatomical variation of the suprascapular notch was discovered in one scapula from 610 analyzed by three-dimensional CT reconstruction. Two bony bridges were found, converting it into a double suprascapular foramen, in the left upper extremity of an 56-year-old Caucasian female. This variation might be a risk factor for suprascapular nerve entrapment. Suprascapular nerve running through inferior suprascapular foramen was discovered. Suprascapular vessels passed through superior suprascapular foramen (artery lay medially and vein laterally). A new hypothesis of double suprascapular foramen formation (mechanism of creation) is presented based on recent anatomical findings (e.g., the discovery in 2002 of the anterior coracoscapular ligament). Knowledge of the anatomical variations described in this study should be helpful in arthroscopic and open procedures at the suprascapular region and also confirms the safety of operative decompression for the suprascapular nerve.

Angioarchitecture of the bovine spermatic cord

We described the topography and morphometry of the testicular artery, pampiniform plexus veins, and indirect connections between them in the spermatic cord of the bull. Sixty microcorrosive casts of bovine spermatic cords were analyzed macroscopically, by stereomicroscopy, and by scanning electron microscopy. The average size of the testicles was 94.6 × 49.7 × 54.7 mm. The testicular artery formed a superiorly pointed cone‐like structure with its base fixed to the proximal part of the gonad. The artery gave off one or two branches to the head of epididymis and to the deferens duct. The pampiniform plexus originated from intra‐tunical veins. Veins of the pampiniform plexus were of smaller diameter but larger number than intra‐tunical ones. The density of the veins of the pampiniform plexus was 9.37 ± 1.07 mm−2. The testicular vein began 90–121 mm above the superior pole of the testis. In 2.9% of specimens, the testicular vein was doubled. Numerous anastomoses among veins of pampiniform plexus were observed. Additionally, indirect anastomoses between the testicular artery and pampiniform plexus veins formed by the capillary network of the vasa vasorum of the testicular artery were visualized by scanning electron microscopy. In all cases, narrowings in the casts of the precapillary vessel were observed. We also documented the vasa vasorum of the testicular artery in bulls. The density of these vessels was 22.87 ± 11.48 mm−2. The indirect arteriovenous connections together with the presence of circular constrictions of the lumen in precapillary vessels may play a role in testicular blood flow regulation. J. Morphol., 2011.

Variable morphology of the anterior coracoscapular ligament - A proposal of classification

INTRODUCTION The suprascapular region is the most common site of compression and injury to the suprascapular nerve. This often results in suprascapular nerve entrapment, a possible risk factor being the anterior coracoscapular ligament (ACSL), a structure that runs in the suprascapular notch, below the superior transverse scapular ligament. The aim of the present study is to determine morphological variation of the ACSL and to measure the reduction in size of the suprascapular opening of specimens exhibiting it. MATERIALS AND METHODS A total of 84 human shoulders were included in the study. The following measurements were defined and performed for every ACSL: maximal length (ML), maximal proximal width (MPW) and maximal distal width (MPW). Additionally, two measurements of the suprascapular opening were collected: the area (aSSO) and the middle width (mwSSO). All of these measurements were taken using two independent methods: classical osteometry, and a new procedure based on the analysis of digital photographic documentation of the SSN taken using MultiScanBase v.14.02 software. RESULTS The anterior coracoscapular ligaments were present in 43 shoulders (51.2%). The analysis allowed the determination of four types of ACSL: first - fan-shaped (7%), second - band-shaped (62.8%), third - bifid (11.6%) and fourth - vestigial (18.6%). The mean area as well as the middle width of the suprascapular opening in the specimens with the anterior coracoscapular ligament was smaller than in those without this structure, however, no statistically significant differences were observed. The suprascapular nerve passed inferior to the ACSL in 2 specimens, and superior to it in 41. CONCLUSION The study presents a classification of the anterior coracoscapular ligament that has not been described in the literature and can be helpful in arthroscopic and open procedures of the suprascapular region. Knowledge of such anatomical variations confirms the safety of operative decompression to relieve entrapment of the suprascapular nerve.

The abducens nerve: its topography and anatomical variations in intracranial course with clinical commentary.

BACKGROUND The sixth cranial nerve (CN VI) - or the abducens nerve - in humans supplies only the lateral rectus muscle. Due to its topographic conditions, including angulations and fixation points along its course from the brainstem to the lateral rectus muscle, the CN VI is vulnerable to injury. Every case of CN VI palsy requires precise diagnostics, which is facilitated by an understanding of the anatomy. The present articles aims include a detailed study of the intracranial course of the CN VI, determination of occurrence of its particular anatomical variations, as well as presentation of some essential anatomical conditions which may conduce to CN VI palsy. Special emphasis was put on the correlation between craniometric measurements and a particular variation of the CN VI, which complements the data that can be found in literature. MATERIALS AND METHODS Twenty randomly selected specimens of cadaveric heads fixed in a 10% formalin solution were studied. The study used 40 specimens of the CN VI in order to examine its course variations within the section between the pontomedullary sulcus and the superior orbital fissure. RESULTS Detailed analysis of the CN VI topography and anatomy in its intracranial course revealed 3 anatomical variations of the nerve in the studied specimens. Variation I, found in 70% of cases, covers those cases in which the CN VI was found to be a single trunk. Those cases in which there was a branching of the CN VI exclusively inside the cavernous sinus were classified as variation II, occurring in 20% of cases. Cases of duplication of the CN VI were classified as variation III, found in 10% of the specimens. In 75% of cases of CN VI duplication one of the nerve trunks ran upwards from the petrosphenoidal ligament, outside Dorellos canal. CONCLUSIONS The CN VI throughout its intracranial course usually runs as a single trunk, however, common variations include also branching of the nerve in the cavernous sinus or duplication. Topographic relations of the CN VI with adjacent structures account for the risk of injuries which may be caused to the nerve as a result of a disease or surgical procedures.

Morphological and Radiological Study of Ossified Superior Transverse Scapular Ligament as Potential Risk Factor of Suprascapular Nerve Entrapment

The suprascapular notch is covered superiorly by the superior transverse scapular ligament. This region is the most common place of suprascapular nerve entrapment formation. The study was performed on 812 specimens: 86 dry scapulae, 104 formalin-fixed cadaveric shoulders, and 622 computer topography scans of scapulae. In the cases with completely ossified superior transverse scapular ligament, the following measurements were performed: proximal and distal width of the bony bridge, middle transverse and vertical diameter of the suprascapular foramen, and area of the suprascapular foramen. An ossified superior transverse scapular ligament was observed more often in men and in the right scapula. The mean age of the subjects with a completely ossified superior transverse scapular ligament was found to be similar than in those without ossification. The ossified band-shaped type of superior transverse scapular ligament was more common than the fan-shaped type and reduced the space below the ligament to a significantly greater degree. The ossified band-shaped type should be taken into consideration as a potential risk factor in the formation of suprascapular nerve entrapment. It could explain the comparable frequency of neuropathy in various populations throughout the world despite the significant differences between them in occurrence of ossified superior transverse scapular ligament.

Sexual dimorphism of the suprascapular notch – morphometric study

Introduction The concept of the study was to compare the morphometry of the suprascapular notch (SSN) in females and males because its size and shape may be a factor in suprascapular nerve entrapment. Material and methods The measurements of 81 scapulae included morphological length and width, maximal width and length projection of the scapular spine, and width and length of the glenoid cavity. The width-length scapular and glenoid cavity indices were calculated. In addition to standard anthropometric measurements three other dimensions were defined and collected for every SSN: maximal depth (MD), superior (STD) and middle (MTD) transverse diameters. Results The analysis of the measurements allowed us to distinguish five types of SSN. Type I (26%) had longer maximal depth than superior transverse diameter. Type II (3%) had equal MD, STD and MTD. In type III (57.6%) superior transverse diameter was longer than maximal depth. In type IV (7.4%) a bony foramen was present. Type V (6%) was without a discrete notch. Types I and III were divided into two subtypes: A (MTD was longer than STD) and B (MTD < STD). Distribution of the suprascapular notch types in both sexes was similar. However, MD, STD and MTD were significantly higher in males. The superior transverse suprascapular ligament was completely and partially ossified in 7.4% and 24.7% respectively. Conclusions The presented classification of the suprascapular notch is simple, easy to use, and based on specific geometric parameters which allow one to clearly distinguish five types of these structures. All dimensions of SSN were significantly higher in males than in females.