Mohamad Hmadeh

Large-Pore Apertures in a Series of Metal-Organic Frameworks

Maximizing Molecular Pore Diameters Amorphous materials, such as activated carbon, can have pore diameters of several nanometers, but the synthesis of ordered structures with very large pore diameters is often thwarted by the creation of interpenetrating networks or difficulties in removing guest molecules. Deng et al. (p. 1018) avoided these problems in the synthesis of metal-organic frameworks (MOFs) with very large diameters (some exceeding 3 nanometers) by using a combination of short and very long linking groups. The compounds formed channels almost 10 nanometers in diameter that could be visualized by electron microscopy and that were large enough to accommodate protein molecules. Metal-organic frameworks with hexagonal channel pores up to almost 100 angstroms in diameter have been synthesized. We report a strategy to expand the pore aperture of metal-organic frameworks (MOFs) into a previously unattained size regime (>32 angstroms). Specifically, the systematic expansion of a well-known MOF structure, MOF-74, from its original link of one phenylene ring (I) to two, three, four, five, six, seven, nine, and eleven (II to XI, respectively), afforded an isoreticular series of MOF-74 structures (termed IRMOF-74-I to XI) with pore apertures ranging from 14 to 98 angstroms. All members of this series have noninterpenetrating structures and exhibit robust architectures, as evidenced by their permanent porosity and high thermal stability (up to 300°C). The pore apertures of an oligoethylene glycol–functionalized IRMOF-74-VII and IRMOF-74-IX are large enough for natural proteins to enter the pores.

Acid−Base Actuation of [c2]Daisy Chains

A versatile synthetic strategy, which was conceived and employed to prepare doubly threaded, bistable [c2]daisy chain compounds, is described. Propargyl and 1-pentenyl groups have been grafted onto the stoppers of [c2]daisy chain molecules obtained using a template-directed synthetic protocol. Such [c2]daisy chain molecules undergo reversible extension and contraction upon treatment with acid and base, respectively. The dialkyne-functionalized [c2]daisy chain (AA) was subjected to an [AA+BB] type polymerization with an appropriate diazide (BB) to afford a linear, mechanically interlocked, main-chain polymer. The macromolecular properties of this polymer were characterized by chronocoulometry, size exclusion chromatography, and static light-scattering analysis. The acid-base switching properties of both the monomers and the polymer have been studied in solution, using (1)H NMR spectroscopy, UV/vis absorption spectroscopy, and cyclic voltammetry. The experimental results demonstrate that the functionalized [c2]daisy chains, along with their polymeric derivatives, undergo quantitative, efficient, and fully reversible switching processes in solution. Kinetics measurements demonstrate that the acid/base-promoted extension/contraction movements of the polymeric [c2]daisy chain are actually faster than those of its monomeric counterpart. These observations open the door to correlated molecular motions and to changes in material properties.

Metal-Organic Frameworks Incorporating Copper-Complexed Rotaxanes

MOFs on the move: A copper-coordinated [2]pseudorotaxanate which reacts with zinc nitrate to form threefold interpenetrated networks retains most of its solution-state chemistry, including its ability to undergo electronic switching of some of the copper(I) ions under redox control.

Electrostatic Barriers in Rotaxanes and Pseudorotaxanes

The ability to control the kinetic barriers governing the relative motions of the components in mechanically interlocked molecules is important for future applications of these compounds in molecular electronic devices. In this Full Paper, we demonstrate that bipyridinium (BIPY(2+)) dications fulfill the role as effective electrostatic barriers for controlling the shuttling and threading behavior for rotaxanes and pseudorotaxanes in aqueous environments. A degenerate [2]rotaxane, composed of two 1,5-dioxynaphthalene (DNP) units flanking a central BIPY(2+) unit in the dumbbell component and encircled by the cyclobis(paraquat-p-phenylene) (CBPQT(4+)) tetracationic cyclophane, has been synthesized employing a threading-followed-by-stoppering approach. Variable-temperature (1)H NMR spectroscopy reveals that the barrier to shuttling of the CBPQT(4+) ring over the central BIPY(2+) unit is in excess of 17 kcal mol(-1) at 343 K. Further information about the nature of the BIPY(2+) unit as an electrostatic barrier was gleaned from related supramolecular systems, utilizing two threads composed of either two DNP units flanking a central BIPY(2+) moiety or a central DNP unit flanked by a BIPY(2+) moiety. The threading and dethreading processes of the CBPQT(4+) ring with these compounds, which were investigated by spectrophotometric techniques, reveal that the BIPY(2+) unit is responsible for affecting both the thermodynamics and kinetics of pseudorotaxane formation by means of an intramolecular self-folding (through donor-acceptor interactions with the DNP unit), in addition to Coulombic repulsion. In particular, the free energy barrier to threading (ΔG(f)(++)) of the CBPQT(4+) for the case of the thread composed of a DNP flanked by two BIPY(2+) units was found to be as high as 21.7 kcal mol(-1) at room temperature. These results demonstrate that we can effectively employ the BIPY(2+) unit to serve as electrostatic barriers in water in order to gain control over the motions of the CBPQT(4+) ring in both mechanically interlocked and supramolecular systems.

Redox-driven switching in pseudorotaxanes

Two donor–acceptor thread-like compounds incorporating viologen (V2+) units and 1,5-dihydroxynaphthalene (DNP) stations have been prepared. Their ability to form self-assembled charge-transfer (CT) complexes with cucurbit[8]uril (CB[8]) is evidenced by UV-Vis and NMR spectroscopies, as well as by mass spectrometry. Binding studies show the formation of 1 : 1 and 2 : 1 complexes between CB[8] and a thread-like compound containing two viologen units, while only a 1 : 1 inclusion complex was observed between CB[8] and a thread-like compound containing only a single viologen unit. The switching behavior of the threads within their pseudorotaxane frameworks was investigated by using cyclic voltammetry (CV) and UV-Vis spectroscopy.

On the thermodynamic and kinetic investigations of a [c2]daisy chain polymer

We report a variety of [c2]daisy chain molecules which undergo quantitative, efficient, and fully reversible molecular movements upon the addition of base/acid in organic solvents. Such externally triggered molecular movements can induce the contraction and extension of the [c2]daisy chain molecule as a whole. A linear polymer of such a bistable [c2]daisy chain exerts similar types of movements and can be looked upon as a candidate for the development of artificial muscles. The spectrophotometric investigations of both the monomeric and polymeric bistable [c2]daisy chains, as well as the corresponding model compounds, were performed in MeCN at room temperature, in order to obtain the thermodynamic parameters for these mechanically interlocked molecules. Based on their spectrophotometric and thermodynamic characteristics, kinetic analysis of the acid/base-induced contraction and extension of the [c2]daisy chain monomer and polymer were conducted by employing a stopped-flow technique. These kinetic data suggest that the rates of contraction and extension for these [c2]daisy chain molecules are determined by the thermodynamic stabilities of the corresponding kinetic intermediates. Faster switching rates for both the contraction and extension processes of the polymeric [c2]daisy chain were observed when compared to those of its monomeric counterpart. These kinetic and thermodynamic investigations on [c2]daisy chain-based muscle-like compounds provide important information for those seeking an understanding of the mechanisms of actuation in mechanically interlocked macromolecules.

Encapsulation of curcumin in cyclodextrin-metal organic frameworks: Dissociation of loaded CD-MOFs enhances stability of curcumin.

Curcumin has been successfully encapsulated in cyclodextrin-metal organic frameworks (CD-MOFs) without altering their crystallinity. The interaction between curcumin and CD-MOFs is strong through hydrogen bond type interaction between the OH group of cyclodextrin of CD-MOFs and the phenolic hydroxyl group of the curcumin. Interestingly, dissolving the curcumin loaded CD-MOFs crystals in water results in formation of a unique complex between curcumin, γCD and potassium cations. In fact, the initial interaction between curcumin and CD-MOF is crucial for the formation of the latter. This new complex formed in alkaline media at pH 11.5 has maximum absorbance at 520nm and emittance at 600nm. Most importantly, the stability of curcumin in this complex was enhanced by at least 3 orders of magnitude compared to free curcumin and curcumin:γ-CD at pH 11.5. These results suggest a promising benign system of CD-MOFs, which can be used to store and stabilize curcumin for food applications.

Cadmium–Aluminum Layered Double Hydroxide Microspheres for Photocatalytic CO2 Reduction

We report the synthesis of cadmium-aluminum layered double hydroxide (CdAl LDH) using the reaction-diffusion framework. As the hydroxide anions diffuse into an agar gel matrix containing the mixture of aluminum and cadmium salts at a given ratio, they react to give the LDH. The LDH self-assembles inside the pores of the gel matrix into a unique spherical-porous shaped microstructure. The internal and external morphologies of the particles are studied by electron microscopy and tomography revealing interconnected channels and a high surface area. This material is shown to exhibit a promising performance in the photoreduction of carbon dioxide using solar light. Moreover, the palladium-decorated version shows a significant improvement in its reduction potential at room temperature.

Postmetalated Zirconium Metal Organic Frameworks as a Highly Potent Bactericide

Metal-organic frameworks (MOFs) have emerged as an important class of hybrid organic-inorganic materials. One of the reasons they have gained remarkable attention is attributed to the possibility of altering them by postsynthetic modification, thereby providing access to new and novel advanced materials. MOFs have been applied in catalysis, gas storage, gas separation, chemical sensing, and drug delivery. However, their bactericidal use has rarely been explored. Herein, we developed a two-step process for the synthesis of zirconium-based MOFs metalated with silver cations as a potent antibacterial agent. The obtained products were thoroughly characterized by powder X-ray diffraction, scanning electron microscopy, UV-visible, IR, thermogravimetric, and Brunauer-Emmett-Teller analyses. Their potency was evaluated against E. coli with a reported minimal inhibitory concentration and minimal bactericidal concentration of as low as 6.5 μg/mL of silver content. Besides the novelty of the system, the advantage of this strategy is that the MOFs could be potentially regenerated and remetalated after each antibacterial test, unlike previously reported frameworks, which involved the destruction of the framework.

Synthesis, size and structural evolution of metal–organic framework-199 via a reaction–diffusion process at room temperature

Single crystals of metal–organic framework-199 are successfully synthesized in a hydrogel medium using a reaction–diffusion framework. This method is rapid, efficient, scalable, and environmentally friendly. Control over the size, dispersity and the morphology of the crystals is achieved and several key parameters in the mechanism of crystal growth are elucidated.