Mohamed A. Kassem

Efficacy of topical griseofulvin in treatment of tinea corporis

Tinea infections are among the most common dermatological conditions throughout the world. Griseofulvin is a classical oral fungistatic antibiotic, active against Epidermophyton floccosum, Trichophyton and Microsporum species, the causative fungi of tinea corporis. To evaluate the efficacy of topical griseofulvin in the treatment of tinea circinata using three different vehicles for drug delivery. Sixteen patients with tinea circinata were instructed to apply either griseofulvin gel form in group A or a similar placebo gel for control group; a niosomal gel formulation of griseofulvin for group B or; a liposomal gel formulation of griseofulvin for group C. Patients were evaluated both clinically and mycologically after 3 weeks. Marked improvement was seen for groups A, B and C both clinically and mycologically while no improvement was observed in the placebo group. Mild and transient irritation was reported in four patients. Our results show that topical griseofulvin preparations may be effective and safe in treating tinea circinata and that further large‐scale studies may establish the high efficacy of the niosomal gel formulation.

Enhanced bioavailability of buspirone hydrochloride via cup and core buccal tablets: formulation and in vitro/in vivo evaluation.

This work aims to prepare sustained release buccal mucoadhesive tablets of buspirone hydrochloride (BH) to improve its systemic bioavailability. The tablets were prepared according to 5×3 factorial design where polymer type was set at five levels (carbopol, hydroxypropyl methylcellulose, sodium alginate, sodium carboxymethyl cellulose and guar gum), and polymer to drug ratio at three levels (1:1, 2:1 and 3:1). Mucoadhesion force, ex vivo mucoadhesion time, percent BH released after 8 h (Q8h) and time for release of 50% BH (T(₅₀%)) were chosen as dependent variables. Additional BH cup and core buccal tablets were prepared to optimize BH release profile and make it uni-directional along with the tablets mucoadhesion. Tablets were evaluated in terms of content uniformity, weight variation, thickness, diameter, hardness, friability, swelling index, surface pH, mucoadhesion strength and time and in vitro release. Cup and core formula (CA10) was able to adhere to the buccal mucosa for 8h, showed the highest Q8h (97.91%) and exhibited a zero order drug release profile. Pharmacokinetic study of formula CA10 in human volunteers revealed a 5.6 fold increase in BH bioavailability compared to the oral commercial Buspar® tablets. Conducting level A in vitro/in vivo correlation showed good correlation (r²=0.9805) between fractions dissolved in vitro and fractions absorbed in vivo.

Lyophilized Sustained Release Mucoadhesive Chitosan Sponges for Buccal Buspirone Hydrochloride Delivery: Formulation and In Vitro Evaluation

This work aims to prepare sustained release buccal mucoadhesive lyophilized chitosan sponges of buspirone hydrochloride (BH) to improve its systemic bioavailability. Chitosan sponges were prepared using simple casting/freeze-drying technique according to 32 factorial design where chitosan grade was set at three levels (low, medium, and high molecular weight), and concentration of chitosan solution at three levels (0.5, 1, and 2%). Mucoadhesion force, ex vivo mucoadhesion time, percent BH released after 8 h (Q8h), and time for release of 50% BH (T50%) were chosen as dependent variables. Additional BH cup and core buccal chitosan sponge were prepared to achieve uni-directional BH release toward the buccal mucosa. Sponges were evaluated in terms of drug content, surface pH, scanning electron microscopy, swelling index, mucoadhesion strength, ex vivo mucoadhesion time, and in vitro drug release. Cup and core sponge (HCH 0.5E) were able to adhere to the buccal mucosa for 8 h. It showed Q8h of 68.89% and exhibited a uni-directional drug release profile following Higuchi diffusion model.

Development and validation of LC-MS/MS assay for the determination of the prodrug Midodrine and its active metabolite Desglymidodrine in plasma of ascitic patients: Application to individualized therapy and comparative pharmacokinetics.

Midodrine (MD) is a prodrug that is converted after oral administration to Desglymidodrine (DMD). In this study, an LC-MS/MS assay was developed and validated for investigation of the pharmacokinetics of MD and DMD in non azotemic patients with liver cirrhosis and tense ascites. Results were compared to those noted with healthy volunteers following the adminstration of a single oral dose of MD. Sample preparation was performed by liquid-liquid extraction using t-butyl methyl ether. HPLC separation was carried out using RP C18 column (4.6mm×50mm, 5μm). Isocratic elution was performed using methanol:0.2% formic acid (70:30, v/v) as the mobile phase, at a flow rate of 0.7mL/min. Tandem mass spectrometric detection was employed at positive electrospray ionization in MRM mode for the determination of MD and DMD. Analysis was carried out within 1.0min over a concentration range of 0.50-40.00ng/mL for the prodrug and its active metabolite. The assay was validated according to FDA guidelines for bioanalytical method validation and satisfactory results were obtained. The applicability of the assay for the determination of the pharmacokinetic parameters of MD and DMD and personalized therapy was demonstrated in healthy volunteers and ascitic patients. Results revealed significant differences in pharmacokinetic parameters among the studied groups. Such differences were explained on the basis of the medical condition and co-adminstered medications exerting possible drug-drug interaction. Results confirmed the need for implementation of reliable analysis tools for therapeutic dose adjustment.

In-vivo evaluation of clindamycin release from glyceryl monooleate-alginate microspheres by NIR spectroscopy

The purpose of this study was to use near-infrared (NIR) transmission spectroscopic technique to determine clindamycin plasma concentration after oral administration of clindamycin loaded GMO-alginate microspheres using rabbits as animal models. Lyophilized clindamycin-plasma standard samples at a concentration range of 0.001-10 μg/ml were prepared and analyzed by NIR and HPLC as a reference method. NIR calibration model was developed with partial least square (PLS) regression analysis. Then, a single dose in-vivo evaluation was carried out and clindamycin-plasma concentration was estimated by NIR. Over 24 h time period, the pharmacokinetic parameters of clindamycin were calculated for the clindamycin loaded GMO-alginate microspheres (F3) and alginate microspheres (F2), and compared with the plain drug (F1). PLS calibration model with 7-principal components (PC), and 8000-9200 cm(-1) spectral range shows a good correlation between HPLC and NIR values with root mean square error of cross validation (RMSECV), root mean square error of prediction (RMSEP), and calibration coefficient (R(2)) values of 0.245, 1.164, and 0.9753, respectively, which suggests that NIR transmission technique can be used for drug-plasma analysis without any extraction procedure. F3 microspheres exhibited controlled and prolonged absorption Tmax of 4.0 vs. 1.0 and 0.5 h; Cmax of 2.37±0.3 vs. 3.81±0.8 and 5.43±0.7 μg/ml for F2 and F1, respectively. These results suggest that the combination of GMO and alginate (1:4 w/w) could be successfully employed for once daily clindamycin microspheres formulation which confirmed by low Cmax and high Tmax values.

Electrosteric stealth Rivastigmine loaded liposomes for brain targeting: preparation, characterization, ex vivo, bio-distribution and in vivo pharmacokinetic studies

Abstract Being one of the highly effective drugs in treatment of Alzheimer’s disease, Rivastigmine brain targeting is highly demandable, therefore liposomal dispersion of Rivastigmine was prepared containing 2 mol% PEG-DSPE added to Lecithin, Didecyldimethyl ammonium bromide (DDAB), Tween 80 in 1:0.02:0.25 molar ratio. A major challenge during the preparation of liposomes is maintaining a stable formulation, therefore the aim of our study was to increase liposomal stability by addition of DDAB to give an electrostatic stability and PEG-DSPE to increase stability by steric hindrance, yielding what we called an electrosteric stealth (ESS) liposomes. A medium nano-sized liposome (478 ± 4.94 nm) with a nearly neutral zeta potential (ZP, −8 ± 0.2 mV) and an entrapment efficiency percentage of 48 ± 6.22 was prepared. Stability studies showed no major alteration after three months storage period concerning particle size, polydispersity index, ZP, entrapment efficiency and in vitro release study confirming the successful formation of a stable liposomes. No histopathological alteration was recorded for ESS liposomes of the sheep nasal mucosa. While ESS liposomes showed higher % of drug permeating through the sheep nasal mucosa (48.6%) than the drug solution (28.7%). On completing the in vivo pharmacokinetic studies of 36 rabbits showed 424.2% relative bioavailability of the mean plasma levels of the formula ESS compared to that of RHT intranasal solution and 486% relative bioavailability of the mean brain levels.

Enhancement of dissolution and oral bioavailability of lacidipine via pluronic P123/F127 mixed polymeric micelles: formulation, optimization using central composite design and in vivo bioavailability study

Abstract This study aims at preparing and optimizing lacidipine (LCDP) polymeric micelles using thin film hydration technique in order to overcome LCDP solubility-limited oral bioavailability. A two-factor three-level central composite face-centered design (CCFD) was employed to optimize the formulation variables to obtain LCDP polymeric micelles of high entrapment efficiency and small and uniform particle size (PS). Formulation variables were: Pluronic to drug ratio (A) and Pluronic P123 percentage (B). LCDP polymeric micelles were assessed for entrapment efficiency (EE%), PS and polydispersity index (PDI). The formula with the highest desirability (0.959) was chosen as the optimized formula. The values of the formulation variables (A and B) in the optimized polymeric micelles formula were 45% and 80%, respectively. Optimum LCDP polymeric micelles had entrapment efficiency of 99.23%, PS of 21.08 nm and PDI of 0.11. Optimum LCDP polymeric micelles formula was physically characterized using transmission electron microscopy. LCDP polymeric micelles showed saturation solubility approximately 450 times that of raw LCDP in addition to significantly enhanced dissolution rate. Bioavailability study of optimum LCDP polymeric micelles formula in rabbits revealed a 6.85-fold increase in LCDP bioavailability compared to LCDP oral suspension.