Mohamed Sahbi Loukil

Thermoelastic constants of symmetric laminates with cracks in 90-layer: application of simple models

Abstract The change of thermoelastic properties of cross-ply and quasi-isotropic laminates with intralaminar cracks in layers is analysed. Predictions are performed using previously derived general expressions for stiffness of symmetric damaged laminates as dependent on crack density and crack face opening and sliding. It is shown that the average crack opening displacement can be linked with the average value of axial stress perturbation between two cracks. Using this relationship, analytical shear lag and Hashin’s models, developed for axial modulus, can be applied for calculating thermal expansion coefficients, in-plane moduli and Poisson’s ratios of damaged laminates. The approach is evaluated using finite element method and it is shown that the accuracy is rather similar to that in axial modulus calculation.

Effective transverse modulus of a damaged layer: Potential for predicting symmetric laminate stiffness degradation

The old concept of the effective stiffness of a 90-layer with intralaminar cracks is revisited performing 3-D FEM parametric analysis of symmetric and balanced laminates. It is shown, focusing on the effective transverse modulus, that the expected dependence of this property on composite elastic properties and laminate lay-up is very weak and follows very simple rules. Calculations show that the effective longitudinal modulus and Poisson’s ratio of the layer are not affected at all by intralaminar cracking. Simple fitting curve for effective transverse modulus change with normalized crack density is obtained from analysis of GF/EP cross-ply laminate. It is shown, comparing with FEM results and experimental data, that this expression can be used as a ‘master curve’ in laminate theory to predict macroscopic elastic property change with crack density in laminates with very different lay-ups and made of different unidirectional composites.