Mohammad Ali Abdelkareem

PAN Based Carbon Nanofibers as an Active ORR Catalyst for DMFC

Polyacrylonitrile (PAN) based carbon nanofibers containing different proportions of transition metals in the form of metal phthalocyanine, MPc, where, M is Co and Fe, have been prepared by electrospinning and their activities for oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) in acidic media were investigated. Field emission electron microscope (FE-SEM), transition electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV) were carried out to investigate the surface morphology, composition, and catalytic activity. The ORR activity significantly increased with the addition of the transition metals, and also increased the pyridine N content. The highest ORR activity was obtained for CoPc PAN nanofibers at 900 oC, this would be related to the balance between electrical conductivity and pyridine N content. FePc PAN based carbon nanofibers at 900 oC showed a high stability and ORR activity comparable to that of the commercial Pt/C catalyst while FePc PAN nanofibers has no MOR activity.

A Key Factor for the Actual Application of a Vapor Feed Passive DMFC Operated with High Concentration of Methanol

The supply of water to the anode from the cathode through the electrolyte membrane is a critical factor for the operation of vapor feed DMFC at high methanol concentrations. A comparative study in a passive vapor feed DMFC employing a PCP on the anode surface had been carried out with and without a hydrophobic cathode filter. Compact and a noncompact cells were fabricated and used. The noncompact cell could be operated with high methanol concentrations of even 100 wt%, while the compact one could not be operated with 90 wt% methanol. This was related to the deficiency of water at the anode surface in the compact cell design, where heat dissipation was not enhanced. For the supply of water to the anode surface, the employment of a hydrophobic filter on the cathode surface was necessary, especially for the compact cell.

Tungsten Carbide Nanofiber Prepared by Electrospinning for Methanol Oxidation Reaction

Tungsten carbide nanofibers for the anode catalyst of direct methanol fuel cells (DMFCs) were prepared from the precursor nanofibers with the diameter around 250 nm using an electrospinning technique. The electrospun nanofibers from the mixture of ammonium metatungstate and polyvinylpyrrolidone were dried and calcined in air at 700 °C to form tungsten oxide nanofibers, and reduced in 20 vol.% CH4/H2 atmosphere at 700 °C for 2 h. Surface morphology and crystalline structure of the prepared nanofibers were investigated using FE-SEM and XRD. The methanol oxidation reaction (MOR) activity of the prepared samples was evaluated by cyclic voltammetry (CV). The FE-SEM and XRD analyses showed that beaded nanofibers of tungsten carbide were successfully obtained. The WC nanofiber electrocatalyst exhibited a MOR activity suggesting it can be a candidate of the catalyst for DMFC. The presence of impurities, carbon and tungsten oxide, which may affect the activity, were detected at the surface.

PAN Based Carbon Nanofibers as an Active ORR Catalyst

Polyacrylonitrile (PAN) based carbon nanofibers were prepared by electrospinning and their activity for oxygen reduction reaction (ORR) in acidic media was investigated. Field emission electron microscope (FE-SEM), transition electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV) were carried out to investigate the surface morphology, composition, and catalytic activity. Thin carbon nanofibers of a 150 nm diameter were successfully produced by electrospinning using 8 wt% PAN in dimethylformamide, 15 cm pin to plate distance, and applying voltage of 18 kV at different carbonization temperatures of 700, 900, 1000, 1100, and 1200 °C. The ORR activity of the prepared carbon nanofibers was evaluated. The PAN based carbon nanofibers showed a considerable ORR activity and this activity was increased by increasing the carbonization temperature. The high ORR onset potentials over 700 mV vs. RHE (milli-volt versus reversible hydrogen electrode) were obtained at temperatures over 1000 °C. The activity of PAN based carbon nanofibers increased with increasing carbonization temperature from 700 to 1100 °C, this would be related to the increasing in the electrical conductivity at low carbonization temperatures, and the high Pyridine N content at the high carbonization temperatures.