Mohammad Amin Mohammadifar

Composition and physicochemical properties of Zedo gum exudates from Amygdalus scoparia

Composition and physicochemical properties of three types of Zedo gum exudates from Amygdalus scoparia were investigated. Monosaccharide analysis by GC-MS indicated the occurrence of arabinose and galactose as the main sugars. FTIR spectra showed no differences in functional groups among the samples. Steady shear rheological data and power law parameters revealed that the white gum (W) was the most shear sensitive type and had the highest value of consistency coefficient. The mechanical spectra derived from the strain and frequency sweep measurements indicated a liquid viscoelastic behavior for Zedo gum dispersions. GPC-MALLS revealed that the white sample had the highest apparent average molecular weight (4.74 × 10(6)Da) and the lowest dispersity (1.045). TG-DTA analysis showed that the character of gum decomposition significantly depended on the gum type and the white sample had the highest thermal stability.

Preparation and characterization of alginate and alginate-resistant starch microparticles containing nisin.

Delivery systems with sustained release of nisin have been proposed to improve stability and long-term effectiveness of this bacteriocin in foods. In this study, nisin was encapsulated in alginate (Alg) and alginate-resistant starch (Alg-RS) microparticles and its release was investigated. Studies found that the nisin concentration has significant influence on encapsulation efficiency (EE), loading capacity (LC) and size of both microparticles. Furthermore, encapsulation efficiency and loading capacity values were more increased by the addition of resistant starch to the alginate formulation. The highest encapsulation efficiency was obtained with Alg-RS microparticles prepared using initial nisin to alginate weight ratio of 25% w/w (59.77 ± 2.26%). Fourier transform-infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and differential scanning calorimetry (DSC) results confirmed the presence of nisin in the microparticles. The in vitro nisin release from these microparticles followed a controlled-release pattern consistent with a Fickian diffusion mechanism. The release rate from Alg-RS microparticles was less than that from the Alg microparticles.

Characterization of nanobiocomposite kappa-carrageenan film with Zataria multiflora essential oil and nanoclay.

In this study, we aimed to improve the physical, mechanical and water-vapor permeability (WVP) properties of kappa-carrageenan (KC) films by including montmorillonite (MMT) nanoclay in the film-forming solution. To further improve these properties, the combined effect of Zataria multiflora Boiss essential oil (ZEO) and MMT was also investigated. The incorporation of MMT improved the physical and mechanical properties of KC film. Film made from KC alone had a tensile strength (TS) of 26.29MPa, while the KC film with 10% nanoclay had a TS of 34.67. Further analysis was provided by X-ray diffraction and scanning electron microscopy that confirmed the dispersion of MMT in the KC matrix. It was also shown that the combined effect of nanoclay and ZEO significantly improved the TS and EB of KC films. ZEO decreased the WVP of the nanocomposite films; for example, 3% ZEO reduced WVP by around 78%. The antimicrobial activity of nanocomposite films was also studied using the overlay and vapor-phase methods; the films effectively inhibited the growth of five pathogens tested. Thus, the incorporation of both nanoclay and ZEO into KC films is a promising way to manufacture films with better mechanical, antimicrobial and WVP properties.

Incorporation of essential oil in alginate microparticles by multiple emulsion/ionic gelation process

In this study, an o/w/o multiple emulsion/ionic gelation method was developed for production of alginate microparticles loaded with Satureja hortensis essential oil (SEO). It was found that the essential oil concentration has significant influence on encapsulation efficiency (EE), loading capacity (LC) and size of microparticles. The values of EE, LC and particle mean diameter were about 52-66%, 20-26%, and 47-117 μm, respectively, when the initial SEO content was 1-3% (v/v) .The essential oil-loaded microparticles were porous, as displayed by scanning electron micrograph. The presence of SEO in alginate microparticles was confirmed by Fourier transform-infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) analyses. SEO-loaded microparticles showed good antioxidant (with DPPH radical scavenging activity of 40.7-73.5%) and antibacterial properties; this effect was greatly improved when the concentration of SEO was 3% (v/v). S. aureus was found to be the most sensitive bacterium to SEO and showed a highest inhibition zone of 304.37 mm(2) in the microparticles incorporated with 3% (v/v) SEO. In vitro release studies showed an initial burst release and followed by a slow release. In addition, the release of SEO from the microparticles followed Fickian diffusion with acceptable release.

Extraction optimization of pepsin-soluble collagen from eggshell membrane by response surface methodology (RSM).

Response surface methodology (RSM) was used to investigate the effect of extraction-process variables on pepsin-soluble collagen (PSC) from eggshell membrane. A central composite design (CCD) was employed for experimental design and analysis of the results to obtain the best possible combination of NaOH concentration (X1: 0.4-1.2 mol/l), alkali treatment time (X2: 6-30 h), enzyme concentration (X3: 15-75 U/mg) and hydrolysis time (X4: 12-60 h) for maximum PSC extraction. The experimental data obtained were fitted to a second-order polynomial equation using multiple regression analysis and analyzed by appropriate statistical methods. According to the results, optimum extraction conditions were as follows: NaOH concentration of 0.76 mol/l, alkali treatment time of 18 h, enzyme concentration of 50 U/mg and hydrolysis time of 43.42 h. The experimental extraction yield under optimal conditions was found to be 30.049%, which is in good agreement with the predicted value of 30.054%.

Complex coacervation of β-lactoglobulin - κ-carrageenan aqueous mixtures as affected by polysaccharide sonication.

The influence of κ-carrageenan (KC) depolymerization using ultrasound on its interaction with β-lactoglobulin (BLG) was investigated by isothermal titration calorimetry (ITC), turbidity measurement, dynamic light scattering and zeta-potential analyses. Time and amplitude of the sonication had a direct effect on the viscosity depression, while the sonication temperature had an opposite effect. ITC measurements indicated that the sonication significantly decreased the affinity constant between KC and BLG. The zeta-potential of the nanoparticles produced from ultrasonicated (US) KC-BLG associative interaction was lower than of those produced from intact (IN) KC-BLG interaction. These differences were attributed to the lower charge density of the KC (US) as a result of sonochemical interactions. Polydispersity and particle size measurements showed that the effect of the sonication was the homogenisation of the nanoparticles in the mixed dispersion. The nanoparticles formed may therefore be useful as a delivery system for fortification purposes of acidic beverages.

A comparative study on the emulsifying properties of various species of gum tragacanth

Emulsification activities of three different species of gum tragacanth containing Astragalus gossypinus, A. compactus and A. rahensis were investigated. Emulsion stability indexes, particle size distributions, steady and unsteady rheological properties and some other physicochemical attributes including the surface tensions and uronic acid contents were taken into consideration. It was revealed that A. gossypinus created the most stable emulsions although having lower viscosity than A. compactus. It is believed that higher insoluble fraction and higher uronic content made this species a good steric and electrostatic emulsifier.

Effect of gamma irradiation on rheological properties of polysaccharides exuded by A. fluccosus and A. gossypinus.

In this study, Iranian gum tragacanth (GT) exudates from Astragalus fluccosus (AFG) and Astragalus gossypinus (AGG) were irradiated at 3, 7, 10 and 15 kGy. Fourier transform infrared spectroscopy (FTIR) data showed that irradiation did not induce changes in the chemical structure of either type of gum. Although particle size distribution and both steady shear and dynamic rheological properties were considerably affected by the irradiation process, the magnitude of the effect of irradiation on each of the rheological and size variables was different for the hydrocolloids. For instance, for AGG, increasing the irradiation dose from 3 to 10 kGy, the d(0.5) and D[3,2] values were reduced by one-sixth to one-eighth fold. Colour measurement revealed that the radiation process led to an increase in the yellow index and b* values for both types of GT in powder form, but it was more pronounced for AGG samples. Irradiation led to an approximate 13-fold increase in redness in AFG. Surface and shape changes of the gum crystals were studied by scanning electron microscope (SEM) and a smoother surface for irradiated samples was detected. The notable changes in functional properties of each variety of irradiated gum should be taken into consideration before using the radiation technology as a commercial tool for sterilisation.

The effect of pH and salt on the stability and physicochemical properties of oil-in-water emulsions prepared with gum tragacanth.

The effect of pH (2.5, 4.0 and 5.4) and salt concentration (0.0, 0.5 and 1.0wt%) on the physical stability of oil-in-water emulsions stabilized with gum tragacanth were investigated during 150 days of storage. Mean droplet diameter, zeta-potential, interfacial tension and steady-shear and dynamic rheological properties were determined to achieve more information about the likely stability mechanisms. The results showed that increasing salt concentration did not have a significant effect on emulsion stability. Emulsions were highly unstable at pH 2.5, with their emulsion-stability index declining almost three times more than that of other emulsions during the storage time. Based on the size distribution data, a direct correlation was not observed between droplet size distribution and emulsion stability. Rheological analysis revealed that pH 2.5 had the lowest apparent viscosity, storage modulus, energy of cohesion (EC) and a-value, and the highest tanδ and b-value.

Influence of gum tragacanth on the physicochemical and rheological properties of kashk

In this study, the physicochemical properties of a low-fat dried yogurt paste (kashk) were determined, and the effects of different concentrations (0, 0·1, 0·3 and 0·5% w/w) of gum tragacanth exudates from Astragalus gossypinus on the stability and texture of the samples were investigated by measuring amount of syneresis, turbidity, particle size distribution (PSD), flow behaviour and viscoelastic properties. The flow behaviour index was not very sensitive to the concentration of gum, while a remarkable concentration dependency of the power-law consistency coefficient and Herschel-Bulkley yield stress was observed. The initial increase in the gum concentration at 0·1 and 0·3% levels led to a higher degree of syneresis, which was related to the depletion flocculation mechanism. However, the reduced amount of syneresis in samples containing 0·5% gum tragacanth was attributed to the significant increase in viscosity of the continuous phase, which is also accompanied by trapping of the aggregated casein particles. The presence of 3% salt in the samples may have led to the neutralization of charges on the surface of gum tragacanth; consequently, the non-adsorbing behaviour of high-ionic-strength polysaccharides inhibited the formation of electrostatic protein-polysaccharide complexes. Furthermore, maximum values of polydispersity, syneresis and tan δ at high frequencies were found in samples containing 0·1% gum tragacanth.