Mohammad Raoufi

Enhanced Removal of Methylene Blue and Methyl Violet Dyes from Aqueous Solution Using a Nanocomposite of Hydrolyzed Polyacrylamide Grafted Xanthan Gum and Incorporated Nanosilica

The synthesis and characterization of a novel nanocomposite is reported that was developed as an efficient adsorbent for the removal of toxic methylene blue (MB) and methyl violet (MV) from aqueous solution. The nanocomposite comprises hydrolyzed polyacrylamide grafted onto xanthan gum as well as incorporated nanosilica. The synthesis exploits the saponification of the grafted polyacrylamide and the in situ formation of nanoscale SiO2 by a sol-gel reaction, in which the biopolymer matrix promotes the silica polymerization and therefore acts as a novel template for nanosilica formation. The detailed investigation of the kinetics and the adsorption isotherms of MB and MV from aqueous solution showed that the dyes adsorb rapidly, in accordance with a pseudo-second-order kinetics and a Langmuir adsorption isotherm. The entropy driven process was furthermore found to strongly depend on the point of zero charge (pzc) of the adsorbent. The remarkably high adsorption capacity of dyes on the nanocomposites (efficiency of MB removal, 99.4%; maximum specific removal Qmax, 497.5 mg g(-1); and efficiency of MV removal, 99.1%; Qmax, 378.8 mg g(-1)) is rationalized on the basis of H-bonding interactions as well as dipole-dipole and electrostatic interactions between anionic adsorbent and cationic dye molecules. Because of the excellent regeneration capacity the nanocomposites are considered interesting materials for the uptake of, for instance, toxic dyes from wastewater.

Targeted superparamagnetic iron oxide nanoparticles for early detection of cancer: Possibilities and challenges

UNLABELLED Nanomedicine, the integration of nanotechnological tools in medicine demonstrated promising potential to revolutionize the diagnosis and treatment of various human health conditions. Nanoparticles (NPs) have shown much promise in diagnostics of cancer, especially since they can accommodate targeting molecules on their surface, which search for specific tumor cell receptors upon injection into the blood stream. This concentrates the NPs in the desired tumor location. Furthermore, such receptor-specific targeting may be exploited for detection of potential metastases in an early stage. Some NPs, such as superparamagnetic iron oxide NPs (SPIONs), are also compatible with magnetic resonance imaging (MRI), which makes their clinical translation and application rather easy and accessible for tumor imaging purposes. Furthermore, multifunctional and/or theranostic NPs can be used for simultaneous imaging of cancer and drug delivery. In this review article, we will specifically focus on the application of SPIONs in early detection and imaging of major cancer types. FROM THE CLINICAL EDITOR Super-paramagnetic iron oxide nanoparticles (SPIONs) have been reported by many to be useful as an MRI contrast agent in the detection of tumors. To further enhance the tumor imaging, SPIONs can be coupled with tumor targeting motifs. In this article, the authors performed a comprehensive review on the current status of using targeted SPIONS in tumor detection and also the potential hurdles to overcome.

Enzyme degradable polymersomes from hyaluronic acid-block-poly(ε-caprolactone) copolymers for the detection of enzymes of pathogenic bacteria.

We introduce a new hyaluronidase-responsive amphiphilic block copolymer system, based on hyaluronic acid (HYA) and polycaprolactone (PCL), that can be assembled into polymersomes by an inversed solvent shift method. By exploiting the triggered release of encapsulated dye molecules, these HYA-block-PCL polymersomes lend themselves as an autonomous sensing system for the detection of the presence of hyaluronidase, which is produced among others by the pathogenic bacterium Staphylococcus aureus. The synthesis of the enzyme-responsive HYA-block-PCL block copolymers was carried out by copper-catalyzed Huisgen 1,3-dipolar cycloaddition of ω-azide-terminated PCL and ω-alkyne-functionalized HYA. The structure of the HYA-block-PCL assemblies and their enzyme-triggered degradation and concomitant cargo release were investigated by dynamic light scattering, fluorescence spectroscopy, confocal laser-scanning microscopy, scanning and transmission electron, and atomic force microscopy. As shown, a wide range of reporter dye molecules as well as antimicrobials can be encapsulated into the vesicles during formation and are released upon the addition of hyaluronidase.

Pushing the size limits in the replication of nanopores in anodized aluminum oxide via the layer-by-layer deposition of polyelectrolytes.

We report on the successful replication of the smallest pores in anodized aluminum oxide (AAO) via the layer-by-layer (LBL) deposition of polyelectrolytes to date to yield free-standing, open nanotubes with inner and outer diameters (±2σ) down to 37 ± 4 and 52 ± 19 nm, respectively. This work is based on the fabrication of defined arrays of highly regular nanopores by anodic oxidation of aluminum. Pores with pore diameters between 53 ± 9 and 356 ± 14 nm and interpore distances between 110 ± 3 and 500 ± 17 nm were obtained using an optimized two-step anodization procedure. 3-(Ethoxydimethylsilyl)propylamine-coated pores were replicated by alternating LBL deposition of poly(styrenesulfonate) and poly(allylamine). The detrimental adsorption of polyelectrolyte on the top surface of the template that typically results in partial pore blocking was eliminated by controlling the surface energy of the top surface via deposition of an ultrathin gold layer. The thickness of the deposited LBL multilayer assembly at the pore orifice agreed to within the experimental error with the thicknesses measured by variable angle spectroscopic ellipsometry and atomic force microscopy (AFM) for layers assembled on flat substrates. The selective dissolution of the alumina template afforded free-standing, open polymer nanotubes that were stable without any cross-linking procedure. The nanotubes thus obtained possessed mean outer diameters as small as 52 nm, limited by the size of the AAO template.

Improved synthesis of anodized aluminum oxide with modulated pore diameters for the fabrication of polymeric nanotubes

We report on the fabrication and characterization of unprecedented anodized aluminum oxide (AAO) templates and their replication to yield dye-functionalized polymeric nanotubes with modulated outer diameters between 83 ± 3 nm and 167 ± 8 nm by wetting the templates with a polymer solution. In particular, modulated diameter AAO nanopores with interpore distances of 234 ± 9 nm, 273 ± 6 nm, and 332 ± 11 nm and diameters ranging between 40 nm and 120 nm were fabricated with segment lengths of the thinner and the thicker pore portion of 250 nm to ≥100 μm and 300 nm to 18 μm, respectively, in a highly controlled continuous anodization process. In this process the temperature at the Al/Al2O3 interface was altered in situ during hard anodization at constant potential by modulating the flow rate of the cooling electrolyte. The pores, which could be widened at constant etch rate in phosphoric acid, were subsequently successfully replicated by the solution-wetting method using a solution of poly(methyl methacrylate) (PMMA) and a fluorescent dye in toluene. Removal of the AAO templates in aqueous KOH yielded open nanotubes with precisely controllable outer diameters. This versatile strategy, which afforded polymeric nanotubes corresponding accurately to the advanced AAO templates with radii of curvature along the nanostructures between 296 ± 13 nm and 121 ± 11 nm, can be expanded to the fabrication of unprecedented functional nanoobjects, such as nanotubes and nanorods, of a broad range of materials.

Nanopore diameters tune strain in extruded fibronectin fibers

Fibronectin is present in the extracellular matrix and can be assembled into nanofibers in vivo by undergoing conformational changes. Here, we present a novel approach to prepare fibronectin nanofibers under physiological conditions using an extrusion approach through nanoporous aluminum oxide membranes. This one-step process can prepare nanofiber bundles up to a millimeter in length and with uniform fiber diameters in the nanometer range. Most importantly, by using different pore diameters and protein concentrations in the extrusion process, we could induce varying lasting structural changes in the fibers, which were monitored by Förster resonance energy transfer and should impose different physiological functions.

Fabrication of complex free-standing nanostructures with concave and convex curvature via the layer-by-layer approach.

We report on the fabrication of unprecedented free-standing complex polymeric nanoobjects, which possess both concave and convex curvatures, by exploiting the layer-by-layer (LBL) deposition of polyelectrolytes. In a combined top-down/bottom-up replication approach pore diameter-modulated anodic aluminum oxide (AAO) templates, fabricated by temperature modulation hard anodization (TMHA), were replicated with multilayers of poly(styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) to yield open nanotubes with diameters in the wide and narrow segments of 210 and 150 nm, respectively. To obtain stable pore diameter-modulated nanopores, which possess segment lengths between 1 and 5 μm and 5 and 10 μm in the narrow and wide pore portion, respectively, conventional hard anodization of aluminum was followed by a subsequent temperature-modulated anodization. After removing the backside aluminum electrode, silanizing the aluminum oxide, and passivating the exposed membrane surface with a thin layer of gold, PSS and PAH were deposited alternatingly to yield LBL multilayers. For optimized LBL multilayer thicknesses and compactness, established in separate experiments on silicon substrates and nanoporous AAO with straight pores, free-standing polymeric nanoobjects with concave and convex curvatures, were obtained. These were stable for wall thickness to pore diameter ratios of ≥0.08.

Sensing of Alzheimer's Disease and Multiple Sclerosis Using Nano-Bio Interfaces.

It is well understood that patients with different diseases may have a variety of specific proteins (e.g., type, amount, and configuration) in their plasmas. When nanoparticles (NPs) are exposed to these plasmas, the resulting coronas may incorporate some of the disease-specific proteins. Using gold (Au) NPs with different surface properties and corona composition, we have developed a technology for the discrimination and detection of two neurodegenerative diseases, Alzheimers disease (AD) and multiple sclerosis (MS). Applying a variety of techniques, including UV-visible spectra, colorimetric response analyses and liquid chromatography-tandem mass spectrometry, we found the corona-NP complexes, obtained from different human serums, had distinct protein composition, including some specific proteins that are known as AD and MS biomarkers. The colorimetric responses, analyzed by chemometrics and statistical methods, demonstrate promising capabilities of the technology to unambiguously identify and discriminate AD and MS. The developed colorimetric technology might enable a simple, inexpensive and rapid detection/discrimination of neurodegenerative diseases.

Template-assisted extrusion of biopolymer nanofibers under physiological conditions

Biomedical applications ranging from tissue engineering to drug delivery systems require versatile biomaterials based on the scalable and tunable production of biopolymer nanofibers under physiological conditions. These requirements can be successfully met by a novel extrusion process through nanoporous aluminum oxide templates, which is presented in this study. With this simple method we are able to control the nanofiber diameter by chosing the size of the nanopores and the concentration of the biopolymer feed solution. Nanofiber assembly into different hierarchical fiber arrangements can be achieved with a wide variety of different proteins ranging from the intracellular proteins actin, α-actinin and myosin to the extracellular matrix components collagen, fibronectin, fibrinogen, elastin and laminin. The extrusion of nanofibers can even be applied to the polysaccharides hyaluronan, chitosan and chondroitin sulphate. Moreover, blends of different proteins or proteins and polysaccharides can be extruded into composite nanofibers. With these features our template-assisted extrusion process will lead to new avenues in the development of nanofibrous biomaterials.

Double domain polyethylenimine-based nanoparticles for integrin receptor mediated delivery of plasmid DNA

The objective of the present study is to conjugate L-thyroxine PEI derivative onto another PEI to compensate the amine content of the whole structure which has been utilized for the ligand conjugation. Since αvβ3 integrin receptors are over-expressed on cancer cells and there is binding site for L-thyroxine on these receptors, PEI conjugation by L-thyroxine along with restoring the PEI amine content might be an efficient strategy for targeted delivery using polymeric nanoparticles. The results demonstrated the ability of the PEI conjugate in the formation of nanoparticles with the size of around 210 nm with higher buffering capacity. The conjugated PEI derivative increased the transfection efficiency in the cell lines over-expressing integrin by up to two folds higher than unmodified PEI, whereas in the cell lines lacking the integrin receptors there was no ligand conjugation-associated difference in gene transfer ability. The specificity of transfection demonstrated the delivery of plasmid DNA through integrin receptors. Also, the results of in vivo imaging of the polyplexes revealed that 99mTc-labeled PEI/plasmid DNA complexes accumulated in kidney and bladder 4 h post injection. Therefore, this PEI derivative could be considered as an efficient targeted delivery system for plasmid DNA.