Mohammad Soheilmoghaddam

Development of regenerated cellulose/halloysite nanotube bionanocomposite films with ionic liquid

In this study, novel nanocomposite films based on regenerated cellulose/halloysite nanotube (RC/HNT) have been prepared using an environmentally friendly ionic liquid 1-butyl-3-methylimidazolium chloride (BMIMCl) through a simple green method. The structural, morphological, thermal and mechanical properties of the RC/HNT nanocomposites were investigated using X-ray diffraction (XRD), Fourier transform infrared (FTIR), field emission scanning electron microscopy (FESEM), thermal analysis and tensile strength measurements. The results obtained revealed interactions between the halloysite nanotubes and regenerated cellulose matrix. The thermal stability and mechanical properties of the nanocomposite films, compared with pure regenerated cellulose film, were significantly improved When the halloysite nanotube (HNT) loading was only 2 wt.%, the 20% weight loss temperature (T20) increased 20°C. The Youngs modulus increased from 1.8 to 4.1 GPa, while tensile strength increased from 35.30 to 60.50 MPa when 8 wt.% halloysite nanotube (HNT) was incorporated, interestingly without loss of ductility. The nanocomposite films exhibited improved oxygen barrier properties and water absorption resistance compared to regenerated cellulose.

Development of regenerated cellulose/halloysites nanocomposites via ionic liquids.

In this study, regenerated cellulose/halloysites (RC/HNT) nanocomposites with different nanofillers loading were fabricated by dissolving the cellulose in 1-ethyl-3-methylimidazolium chloride (EMIMCl) ionic liquid. The films were prepared via solution casting method and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The mechanical properties were investigated by tensile testing. It clearly displayed a good enhancement of both tensile strength and Youngs modulus with HNT loading up to 5 wt%. As the HNT loadings increased to 5 wt%, the thermal behaviour and water resistance rate was also increased. The TEM and SEM images also depicted even dispersion of the HNT and a good intertubular interaction between the HNT and the cellulose matrix.

Bionanocomposites of regenerated cellulose/zeolite prepared using environmentally benign ionic liquid solvent

Bionanocomposite films based on regenerated cellulose (RC) and incorporated with zeolite at different concentrations were fabricated by dissolving cellulose in 1-ethyl-3-methylimidazolium chloride (EMIMCl) ionic liquid using a simple green method. The interactions between the zeolite and the cellulose matrix were confirmed by Fourier transform infrared spectra. Mechanical properties of the nanocomposite films significantly improved as compared with the pure regenerated cellulose film, without the loss of extensibility. Zeolite incorporation enhanced the thermal stability and char yield of the nanocomposites. The scanning electron microscopy and transmission electron microscopy showed that zeolite was uniformly dispersed in the regenerated cellulose matrix. In vitro cytotoxicity test demonstrated that both RC and RC/zeolite nanocomposite films are cytocompatible. These results indicate that the prepared nanocomposites have potential applications in biodegradable packaging, membranes and biomedical areas.

Bionanocomposites of Regenerated Cellulose Reinforced with Halloysite Nanoclay and Graphene Nanoplatelets: Characterizations and Properties

In recent years, the development of environmentally friendly materials obtained from renewable resources has attracted immense interest due to the new sustainable development policies. Cellulose is a readily available, naturally occurring biodegradable, and biocompatible linear polysaccharide. Recently, room temperature ionic liquids have been used as solvents to produce regenerated cellulose (RC) due to their attractive properties such as good chemical and thermal stability, low flammability, low melting point, and ease of recycling. Polymer/nanofiller nanocomposites are believed to have strong potential to widen polymer applications due to enhanced performance. It is also widely accepted that the incorporation of small amount of nanofiller (less than 5 wt%) into bio-based matrixes to produce nano-biocomposite materials with enhanced mechanical, permeability, and thermal properties. The tubular silica-based naturally occurring nanofiller, halloysite nanotubes (HNT), has been investigated due to its high surface area, unique geometry, and its potential to make the hydrogen bonding with polymers to disperse well in the matrix. Graphene nanoplatelets (GNP) have also attracted enormous attention among polymer engineers over the last few years due to its unique electrical, thermal, and mechanical properties. Single layer two-dimensional GNP sheet is considered as the strongest material along with the high surface area and aspect ratio. The chapter aims to highlight the effect of the addition of two different types of nanofillers such as HNT and GNP to produce RC nanocomposites on selected properties.