Mohammad Taghi Khorasani

Synthesis methods for nanosized hydroxyapatite with diverse structures.

Hydroxyapatite (HAp) is the major mineral constituent of vertebrate bones and teeth. It has been well documented that HAp nanoparticles can significantly increase the biocompatibility and bioactivity of man-made biomaterials. Over the past decade, HAp nanoparticles have therefore increasingly been in demand, and extensive efforts have been devoted to develop many synthetic routes, involving both scientifically and economically new features. Several investigations have also been made to determine how critical properties of HAp can be effectively controlled by varying the processing parameters. With such a wide variety of methods for the preparation of HAp nanoparticles, choosing a specific procedure to synthesize a well-defined powder can be laborious; accordingly, in the present review, we have summarized all the available information on the preparation methodologies of HAp, and highlighted the inherent advantages and disadvantages involved in each method. This article is focused on nanosized HAp, although recent articles on microsized particles, especially those assembled from nanoparticles and/or nanocrystals, have also been reviewed for comparison. We have also provided several scientific figures and discussed a number of critical issues and challenges which require further research and development.

Types of neural guides and using nanotechnology for peripheral nerve reconstruction

Peripheral nerve injuries can lead to lifetime loss of function and permanent disfigurement. Different methods, such as conventional allograft procedures and use of biologic tubes present problems when used for damaged peripheral nerve reconstruction. Designed scaffolds comprised of natural and synthetic materials are now widely used in the reconstruction of damaged tissues. Utilization of absorbable and nonabsorbable synthetic and natural polymers with unique characteristics can be an appropriate solution to repair damaged nerve tissues. Polymeric nanofibrous scaffolds with properties similar to neural structures can be more effective in the reconstruction process. Better cell adhesion and migration, more guiding of axons, and structural features, such as porosity, provide a clearer role for nanofibers in the restoration of neural tissues. In this paper, basic concepts of peripheral nerve injury, types of artificial and natural guides, and methods to improve the performance of tubes, such as orientation, nanotechnology applications for nerve reconstruction, fibers and nanofibers, electrospinning methods, and their application in peripheral nerve reconstruction are reviewed.

Laser surface modification of polymers to improve biocompatibility: HEMA grafted PDMS, in vitro assay—III

Abstract Polydimethylsiloxane (PDMS) surface modifications were carried out using CO2-pulsed laser, without photosensitizer at ambient condition, to introduce peroxide groups onto the PDMS surface. Such peroxides were capable of initiating graft polymerization of 2-hydroxyethyl methacrylate (HEMA) onto the PDMS. The modified surfaces were characterized using a variety of techniques including scanning electron microscopy (SEM), attenuated total reflectance infrared (ATR-FTIR) and the water drop contact angle measurements. Data from in vitro assays indicated a significant reduction of the platelet adhesion and aggregation for the modified surfaces.

Laser induced surface modification of polydimethylsiloxane as a super-hydrophobic material

Abstract In order to render the surface of polydimethylsiloxane (PDMS) super-hydrophobic without changing its bulk properties, a PDMS film without photosensitizer was exposed to CO 2 pulsed laser, at room temperature, as the excitation source. The modified surfaces have been studied by performing scanning electron microscopy (SEM) combined with energy dispersive X-ray analysis (EDXA) and attenuated total reflectance infrared (ATR-IR) spectroscopy. To evaluate the surface property, the water drop contact angle was measured. The dependence of SiOSi infrared peak intensity, O/Si ratio and water drop contact angle of the treated PDMS as a function of the number of laser pulses were studied. SEM micrographs and water drop contact angle variations show the uniform porosity and super-hydrophobic nature on the surface of PDMS. ATR-FTIR spectra show that the modified PDMS surface contains carbonate groups which enriched the oxygen content of the surface. EDXA analysis shows a higher percentage of oxygen on the surface of the modified PDMS. The hydrophobicity of the samples was found to depend upon the number of laser pulses, but with significant variation between the treated samples. The bulk mechanical properties of PDMS after being laser-treated did not change as shown by dynamic mechanical thermal analysis (DMTA).

Manufacturing of biodegradable polyurethane scaffolds based on polycaprolactone using a phase separation method: physical properties and in vitro assay

Background Biodegradable polyurethanes have found widespread use in soft tissue engineering due to their suitable mechanical properties and biocompatibility. Methods In this study, polyurethane samples were synthesized from polycaprolactone, hexamethylene diisocyanate, and a copolymer of 1,4-butanediol as a chain extender. Polyurethane scaffolds were fabricated by a combination of liquid–liquid phase separation and salt leaching techniques. The effect of the NCO:OH ratio on porosity content and pore morphology was investigated. Results Scanning electron micrographs demonstrated that the scaffolds had a regular distribution of interconnected pores, with pore diameters of 50–300 μm, and porosities of 64%–83%. It was observed that, by increasing the NCO:OH ratio, the average pore size, compressive strength, and compressive modulus increased. L929 fibroblast and chondrocytes were cultured on the scaffolds, and all samples exhibited suitable cell attachment and growth, with a high level of biocompatibility. Conclusion These biodegradable polyurethane scaffolds demonstrate potential for soft tissue engineering applications.

Polyurethane/fluor-hydroxyapatite nanocomposite scaffolds for bone tissue engineering. Part I: morphological, physical, and mechanical characterization

In this study, new nano-fluor-hydroxyapatite (nFHA)/polyurethane composite scaffolds were fabricated for potential use in bone tissue engineering. Polyester urethane samples were synthesized from polycaprolactone, hexamethylene diisocyanate, and 1,4-butanediol as chain extender. Nano fluor-hydroxyapatite (nFHA) was successfully synthesized by sol-gel method. The solid–liquid phase separation and solvent sublimation methods were used for preparation of the porous composites. Mechanical properties, chemical structure, and morphological characteristics of the samples were investigated by compressive test, Fourier transform infrared, and scanning electron microscopy (SEM) techniques, respectively. The effect of nFHA powder content on porosity and pore morphology was investigated. SEM images demonstrated that the scaffolds were constituted of interconnected and homogeneously distributed pores. The pore size of the scaffolds was in the range 50–250 μm. The result obtained in this research revealed that the porosity and pore average size decreased and compressive modulus increased with nFHA percentage. Considering morphological, physical, and mechanical properties, the scaffold with a higher ratio of nFHA has suitable potential use in tissue regeneration.

Nano-hydroxyapatite reinforced polyhydroxybutyrate composites: a comprehensive study on the structural and in vitro biological properties.

Nanocomposites based on polyhydroxybutyrate (PHB) and hydroxyapatite (HAp) have recently been proposed for application in bone repair and regeneration, but very limited studies have investigated the effect of HAp on the rheological and thermal behavior of PHB. More important, the efficiency of a biomaterial depends greatly on its ability to interact with cells, but little is known about this interaction for this kind of nanocomposite. Hence, this paper dealt with some of the characteristics of solution-casted PHB/HAp nanocomposite films, and tried to explore the effect of HAp nanoparticles on cellular responses. The results showed that both rheological and thermal properties can be tailored by incorporating appropriate amounts of nanoparticles. In vitro studies showed a significant increase in proliferation and differentiation of MC3T3-E1 on nanocomposites compared to the neat polymer. Surface examination indicated that topography and chemistry of surface are important factors influencing cellular processes; while no cell differentiation was found on the neat polymer, nanocomposite with 15 wt.% filler content exhibited a pronounced differentiation resulting from high surface roughness and large amount of exposed HAp. These results suggest that HAp particles play a much more important role in determining the biological performance of PHB than has previously been supposed.

Polyhydroxybutyrate (PHB) Scaffolds as a Model for Nerve Tissue Engineering Application: Fabrication and In Vitro Assay

In this study, we fabricated PHB scaffolds by solid/liquid phase separation method. The properties of fabricated scaffolds were investigated using SEM, DMTA, and DSC. Our studies noticed that for an approach to scaffolds that contain tubular morphology and better mechanical properties, the solution should be frozen near crystallization temperature. For in vitro evaluation, the P19 mouse embryonal cell line was used as a model system. Results notice that cells attach and differentiate to the nerve cell. In vitro assay shows that it is a suitable model for use as a platform for neural tissue engineering applications.

3-Dimensional cell-laden nano-hydroxyapatite/protein hydrogels for bone regeneration applications

The ability to encapsulate cells in three-dimensional (3D) protein-based hydrogels is potentially of benefit for tissue engineering and regenerative medicine. However, as a result of their poor mechanical strength, protein-based hydrogels have traditionally been considered for soft tissue engineering only. Hence, in this study we tried to render these hydrogels suitable for hard tissue regeneration, simply by incorporation of bioactive nano-hydroxyapatite (HAp) into a photocrosslinkable gelatin hydrogel. Different cell types were also encapsulated in three dimensions in the resulting composites to prepare cell-laden constructs. According to the results, HAp significantly improves the stiffness of gelatin hydrogels, while it maintains their structural integrity and swelling ratio. It was also found that while the bare hydrogel (control) was completely inert in terms of bioactivity, a homogeneous 3D mineralization occurs throughout the nanocomposites after incubation in simulated body fluid. Moreover, encapsulated cells readily elongated, proliferated, and formed a 3D interconnected network with neighboring cells in the nanocomposite, showing the suitability of the nano-HAp/protein hydrogels for cellular growth in 3D. Therefore, the hydrogel nanocomposites developed in this study may be promising candidates for preparing cell-laden tissue-like structures with enhanced stiffness and increased osteoconductivity to induce bone formation in vivo.

Laser surface modification of silicone rubber to reduce platelet adhesion in vitro

To improve the blood compatibility, the surface of polydimethylsiloxane (PDMS) films were irradiated using a CO2-pulsed laser. Acrylamide (AAm) was grafted onto a pre-irradiated surface. The AAm-grafted and laser-treated films were characterized using different techniques. Platelet adhesion and activation onto the AAm-grafted PDMS, laser-treated (ungrafted) and unmodified PDMS film surfaces were compared. Data from in vitro assays indicated that the platelet adhesion was reduced on the AAm-grafted PDMS and laser treated PDMS films in comparison with the unmodified PDMS. The laser-irradiated sample showed the minimum platelet adhesion. It seems that laser irradiation onto a silicone rubber surface is a versatile technique to produce anti-thrombogenic surface for biomaterial applications.