Mohd Fadhil Md Din

Comprehensive review on phytotechnology: Heavy metals removal by diverse aquatic plants species from wastewater

Environmental pollution specifically water pollution is alarming both in the developed and developing countries. Heavy metal contamination of water resources is a critical issue which adversely affects humans, plants and animals. Phytoremediation is a cost-effective remediation technology which able to treat heavy metal polluted sites. This environmental friendly method has been successfully implemented in constructed wetland (CWs) which is able to restore the aquatic biosystem naturally. Nowadays, many aquatic plant species are being investigated to determine their potential and effectiveness for phytoremediation application, especially high growth rate plants i.e. macrophytes. Based on the findings, phytofiltration (rhizofiltration) is the sole method which defined as heavy metals removal from water by aquatic plants. Due to specific morphology and higher growth rate, free-floating plants were more efficient to uptake heavy metals in comparison with submerged and emergent plants. In this review, the potential of wide range of aquatic plant species with main focus on four well known species (hyper-accumulators): Pistia stratiotes, Eicchornia spp., Lemna spp. and Salvinia spp. was investigated. Moreover, we discussed about the history, methods and future prospects in phytoremediation of heavy metals by aquatic plants comprehensively.

Perspectives of phytoremediation using water hyacinth for removal of heavy metals, organic and inorganic pollutants in wastewater.

The development of eco-friendly and efficient technologies for treating wastewater is one of the attractive research area. Phytoremediation is considered to be a possible method for the removal of pollutants present in wastewater and recognized as a better green remediation technology. Nowadays the focus is to look for a sustainable approach in developing wastewater treatment capability. Water hyacinth is one of the ancient technology that has been still used in the modern era. Although, many papers in relation to wastewater treatment using water hyacinth have been published, recently removal of organic, inorganic and heavy metal have not been reviewed extensively. The main objective of this paper is to review the possibility of using water hyacinth for the removal of pollutants present in different types of wastewater. Water hyacinth is although reported to be as one of the most problematic plants worldwide due to its uncontrollable growth in water bodies but its quest for nutrient absorption has provided way for its usage in phytoremediation, along with the combination of herbicidal control, integratated biological control and watershed management controlling nutrient supply to control its growth. Moreover as a part of solving wastewater treatment problems in urban or industrial areas using this plant, a large number of useful byproducts can be developed like animal and fish feed, power plant energy (briquette), ethanol, biogas, composting and fiber board making. In focus to the future aspects of phytoremediation, the utilization of invasive plants in pollution abatement phytotechnologies can certainly assist for their sustainable management in treating waste water.

Plant-driven removal of heavy metals from soil: uptake, translocation, tolerance mechanism, challenges, and future perspectives

Increasing heavy metal (HM) concentrations in the soil have become a significant problem in the modern industrialized world due to several anthropogenic activities. Heavy metals (HMs) are non-biodegradable and have long biological half lives; thus, once entered in food chain, their concentrations keep on increasing through biomagnification. The increased concentrations of heavy metals ultimately pose threat on human life also. The one captivating solution for this problem is to use green plants for HM removal from soil and render it harmless and reusable. Although this green technology called phytoremediation has many advantages over conventional methods of HM removal from soils, there are also many challenges that need to be addressed before making this technique practically feasible and useful on a large scale. In this review, we discuss the mechanisms of HM uptake, transport, and plant tolerance mechanisms to cope with increased HM concentrations. This review article also comprehensively discusses the advantages, major challenges, and future perspectives of phytoremediation of heavy metals from the soil.

Development of Bio-PORec® system for polyhydroxyalkanoates (PHA) production and its storage in mixed cultures of palm oil mill effluent (POME).

High PHA production and storage using palm oil mill effluent (POME) was investigated using a laboratory batch Bio-PORec® system under aerobic-feeding conditions. Results showed that maximum PHA was obtained at a specific rate (q(p)) of 0.343 C-mol/C-molh when air was supplied at 20 ml/min. The PHA yield was found to be 0.80 C-mol/C-mol acetic acid (HAc) at microaerophilic condition and the mass balance calculation showed that PHA production increased up to 15.68±2.15 C-mmol/cycle. The experiments showed that short feeding rate, limited requirements for electron acceptors (e.g. O(2), NO(3)) and nutrients (N and P) showed lower tendency of glycogen accumulation and contributed more to PHA productivity.

Characteristics and performance of aerobic granular sludge treating rubber wastewater at different hydraulic retention time

The influence of hydraulic retention time (HRT, 24, 12, and 6h) on the physical characteristics of granules and performance of a sequencing batch reactor (SBR) treating rubber wastewater was investigated. Results showed larger granular sludge formation at HRT of 6h with a mean size of 2.0±0.1mm, sludge volume index of 20.1mLg(-1), settling velocity of 61mh(-1), density of 78.2gL(-1) and integrity coefficient of 9.54. Scanning electron microscope analyses revealed different morphology of microorganisms and structural features of granules when operated at various HRT. The results also demonstrated that up to 98.4% COD reduction was achieved when the reactor was operated at low HRT (6h). Around 92.7% and 89.5% removal efficiency was noted for ammonia and total nitrogen in the granular SBR system during the treatment of rubber wastewater.

Thermal comfort of various building layouts with a proposed discomfort index range for tropical climate

Recent years have seen issues related to thermal comfort gaining more momentum in tropical countries. The thermal adaptation and thermal comfort index play a significant role in evaluating the outdoor thermal comfort. In this study, the aim is to capture the thermal sensation of respondents at outdoor environment through questionnaire survey and to determine the discomfort index (DI) to measure the thermal discomfort level. The results indicated that most respondents had thermally accepted the existing environment conditions although they felt slightly warm and hot. A strong correlation between thermal sensation and measured DI was also identified. As a result, a new discomfort index range had been proposed in association with local climate and thermal sensation of occupants to evaluate thermal comfort. The results had proved that the respondents can adapt to a wider range of thermal conditions.Validation of the questionnaire data at Putrajaya was done to prove that the thermal sensation in both Putrajaya and UTM was almost similar since they are located in the same tropical climate region. Hence, a quantitative field study on building layouts was done to facilitate the outdoor human discomfort level based on newly proposed discomfort index range. The results showed that slightly shaded building layouts of type- A and B exhibited higher temperature and discomfort index. The resultant adaptive thermal comfort theory was incorporated into the field studies as well. Finally, the study also showed that the DI values were highly dependent on ambient temperature and relative humidity but had fewer effects for solar radiation intensity.

Thermal performance of developed coating material as cool pavement material for tropical regions

The amount of solar energy emitted back from conventional asphalt pavement contributes to the phenomenon of urban heat island (UHI), and the current work was focused on studying the thermal behavior of asphalt pavement developed as a coating material from wasted tile. The surface temperature of asphalt surface with and without coating material for ambient temperature and underground soil temperature was studied. Results showed that the application of developed coating materials could reduce the surface temperature of asphalt pavement up to 4.4°C. Rainfall also played a significant role as a natural coolant during the experimental run by maintaining the surface temperature continuously for 2 days after the rainfall event, with an average surface temperature of 41.9°C. The underground soil temperature of the coated surface showed reduction in the range of 0.8-1.2°C throughout the day. The coating materials achieved their efficiency in reducing the emitted radiation only during noontime and the results show that the developed coating materials have true potential to serve as cool pavement to combat UHI effects.

Lipid production by microalgae Chlorella pyrenoidosa cultivated in palm oil mill effluent (POME) using hybrid photo bioreactor (HPBR)

Palm oil mill effluent (POME) as high organic wastewater is a promising substrate in the scenario of algae bloom, by enhancing its lipid production to be further used in biofuel manufacturing. In this research, effect of POME as high nutritional substrate, different cultivation scales such as flask or hybrid photo bioreactor (HPBR), carbon-to-total nitrogen (C:TN) ratio, various light and dark cycles, and diverse organic loading rates (OLR) on the lipid productivity of microalgae Chlorella pyrenoidosa was assessed. Results demonstrated high microalgae growth rate (1.80 d �1 ) at 250 mg COD/L of substrate, while moderate increase (1.37 d �1 ) and growth inhibition (0.80 d �1 ) were recorded at 500 mg COD/L and 1,000 mg COD/L of substrate concentration, respectively. Furthermore, a result proved that low-volume cultivation of microalgae in a flask with lipid productivity at 1.78 mg/L d significantly restricted microalgae production compared with larger scale such as HPBR with lipid productivity at 230 mg/L d. Moreover, highest lipid production at 44.5, 114.9, and 100.5 mg/L d, C:TN ratio at 100:6 and OLR at 36 kg COD/m 3 d, respectively, were documented for continuous illuminaion (24 h). The combination of above conditions can be optimal setting to reach the highest lipid productivity by microalgae C. pyrenoidosa. In addition, the results of this study can be further considered in microalgae lipid production using other wastewaters in order to enhance the lipid production as well as wastewater treating functions.

A study on large scale cultivation of Microcystis aeruginosa under open raceway pond at semi-continuous mode for biodiesel production

The study explores on upstream and downstream process in Microcystis aeruginosa for biodiesel production. The alga was isolated from temple tank, acclimatized and successfully mass cultivated in open raceway pond at semi-continuous mode. A two step combined process was designed and harvested 99.3% of biomass, the daily dry biomass productivity was recorded up to 28gm(-2)day(-1). The lipid extraction was optimized and achieved 21.3%; physicochemical properties were characterized and found 11.7% of FFA, iodine value 72% and 99.2% of ester content. The lipid was transesterified by a two step simultaneous process and produced 90.1% of biodiesel; the calorific value of the biodiesel was 38.8MJ/kg. Further, the physicochemical properties of biodiesel was characterized and found to be within the limits of American ASTM D6751. Based on the areal and volumetric biomass productivity estimation, M. aeruginosa can yield 84.1 tons of dry biomass ha(-1)year(-1).

Lead induced oxidative stress and alteration in the activities of antioxidative enzymes in rice shoots

Physiological responses of Oryza sativa L. to lead excess (10 and 50 μM) were studied in a hydroponic system after 48- and 96-h exposure. Accumulation of Pb in stressed rice shoots was concomitant with an increased metal concentration in the growth media and duration of exposure. The Pb stress resulted in an enhanced lipid peroxidation accompanied by altered activities of antioxidants. A substantial increase in α-tocopherol content of the Pb stressed rice shoots was observed suggesting its important role as an antioxidant. Among the antioxidant enzymes studied, activities of superoxide dismutase (SOD) and ascorbate peroxidase (APX) increased in the Pb-treated rice shoots, whereas that of catalase (CAT) declined. Activity of an important ascorbate-glutathione cycle enzyme, glutathione reductase (GR), also increased significantly in the Pb-treated shoots. The results suggest that Pb toxicity resulted in induction of oxidative stress in rice shoots, and α-tocopherol accumulation and upregulation of SOD, APX, and GR activities play an effective role in acclimatization to Pb stress.