Mohd Sohaimi Abdullah

Precursor Selection and Process Conditions in the Preparation of Carbon Membrane for Gas Separation: A Review

Carbon membranes prepared by pyrolysis/carbonization of polymeric precursors have been studied in the last few years as a promising candidate for gas separation process. As the aim of this paper, a review on polymer precursor selection and effect of pyrolysis conditions on carbon membrane characteristics and performances were discussed in detail. A number of different polymer precursors have been surveyed for their utility as materials in carbon membrane fabrication. The gas transport properties of various types of carbon membrane that produced by different researchers was summarized. Furthermore, the potential applications and future directions of carbon membrane in gas separation processes were also briefly identified.

Antifouling polyethersulfone hemodialysis membranes incorporated with poly (citric acid) polymerized multi-walled carbon nanotubes

Poly (citric acid)-grafted-MWCNT (PCA-g-MWCNT) was incorporated as nanofiller in polyethersulfone (PES) to produce hemodialysis mixed matrix membrane (MMM). Citric acid monohydrate was polymerized onto the surface of MWCNTs by polycondensation. Neat PES membrane and PES/MWCNTs MMMs were fabricated by dry-wet spinning technique. The membranes were characterized in terms of morphology, pure water flux (PWF) and bovine serum albumin (BSA) protein rejection. The grafting yield of PCA onto MWCNTs was calculated as 149.2%. The decrease of contact angle from 77.56° to 56.06° for PES/PCA-g-MWCNTs membrane indicated the increase in surface hydrophilicity, which rendered positive impacts on the PWF and BSA rejection of the membrane. The PWF increased from 15.8Lm(-2)h(-1) to 95.36Lm(-2)h(-1) upon the incorporation of PCA-g-MWCNTs due to the attachment of abundant hydrophilic groups that present on the MWCNTs, which have improved the affinity of membrane towards the water molecules. For protein rejection, the PES/PCA-g-MWCNTs MMM rejected 95.2% of BSA whereas neat PES membrane demonstrated protein rejection of 90.2%. Compared to commercial PES hemodialysis membrane, the PES/PCA-g-MWCNTs MMMs showed less flux decline behavior and better PWF recovery ratio, suggesting that the membrane antifouling performance was improved. The incorporation of PCA-g-MWCNTs enhanced the separation features and antifouling capabilities of the PES membrane for hemodialysis application.

Porous polyethersulfone hollow fiber membrane in CO2 separation process via membrane contactor - The effect of nonsolvent additives

A membrane contactor (MC) is used for natural gas sweetening and wastewater treatment with a membrane that is acting as a separating barrier between two phases, usually liquid and gas. The performance of membrane is governed by parameters such as pore size, porosity, tortuosity and surface hydrophobicity, which can be controlled by a number of methods. Addition of nonsolvents to spinning solution is known to be one of such methods. In this study, the effects of low molecular weight additives as phase inversion promoters on the morphology of polyethersulfone hollow fiber membranes and their performance in gas-liquid MC processes were investigated. It was found that among the six nonsolvent additives under study, addition of water resulted in the highest CO2 flux, by decreasing the thermodynamic stability of polymer solution and maintaining high solvent-nonsolvent exchange rate.

Fabrication of a novel hollow fiber membrane decorated with functionalized Fe2O3 nanoparticles: towards sustainable water treatment and biofouling control

The development of sustainable, surface-functionalized hollow fiber membranes with advanced nanomaterials has enabled the tailoring and targeted control of their physicochemical properties. This provides the material with improved features of hydrophilicity and permeability, excellent selectivity, and superior antifouling and antimicrobial activity. We explored a new strategy using well dispersed functionalized Fe2O3 nanoparticles to fabricate a polyetherimide nanocomposite hollow fiber membrane with enhanced surface and anti-biofouling properties. To confirm the membrane modification, a series of characterizations such as contact angle, surface energy, water uptake capacity, porosity, zeta potential, and morphological analysis were performed. The permeation experiment indicated superior hydrodynamic permeability and antifouling properties with more than 95% rejection of BSA protein molecules after inclusion of a 1.5 wt% additive dosage. Moreover, the nanocomposite membrane exhibited a relatively higher normalized flux and rejection up to 94% during the filtration of hazardous natural organic matter (NOM) with differing parameters such as the feed solution pH and ionic strength. The presence of modified Fe2O3 nanoparticles in the membrane significantly inhibits the growth of bacteria and other microorganisms on the membrane surface, resulting in an enhanced anti-biofouling property. In particular, the demonstrated method illustrates a fast, facile strategy for the functionalization of Fe2O3 nanoparticles to improve the membrane properties and anti-biofouling activity, giving them great potential for effective and sustainable water treatment applications.

Development of biocompatible and safe polyethersulfone hemodialysis membrane incorporated with functionalized multi-walled carbon nanotubes

A novel approach in the design of a safe, high performance hemodialysis membrane is of great demand. Despite many advantages, the employment of prodigious nanomaterials in hemodialysis membrane is often restricted by their potential threat to health. Hence, this work focusses on designing a biocompatible polyethersulfone (PES) hemodialysis membrane embedded with poly (citric acid)-grafted-multi walled carbon nanotubes (PCA-g-MWCNTs). Two important elements which could assure the safety of the nanocomposite membrane, i.e. (i) dispersion stability and (ii) leaching of MWCNTs were observed. The results showed the improved dispersion stability of MWCNTs in water and organic solvent due to the enriched ratio of oxygen-rich groups which subsequently enhanced membrane separation features. It was revealed that only 0.17% of MWCNTs was leached out during the membrane fabrication process (phase inversion) while no leaching was detected during permeation. In terms of biocompatibility, PES/PCA-g-MWCNT nanocomposite membrane exhibited lesser C3 and C5 activation (189.13 and 5.29ng/mL) and proteins adsorption (bovine serum albumin=4.5μg/cm2, fibrinogen=15.95μg/cm2) as compared to the neat PES membrane, while keeping a normal blood coagulation time. Hence, the PES/PCA-g-MWCNT nanocomposite membrane is proven to have the prospect of becoming a safe and high performance hemodialysis membrane.

Hemocompatibility evaluation of poly(1,8-octanediol citrate) blend polyethersulfone membranes

In this study, poly (1,8-octanediol citrate) (POC) was used to modify polyethersulfone (PES)-based membrane to enhance its hemocompatibility. Different compositions of POC (0-3%) were added into the polyethersulfone (PES) dope solutions and polyvinylpyrrolidone (PVP) was used as pore forming agent. The hemocompatible POC modified PES membranes were fabricated through phase-inversion technique. The prepared membranes were characterized using attenuated total reflectance-Fourier transform infrared (ATR-FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), Atomic-force microscopy (AFM), contact angle, Zeta-potential, membrane porosity and pore size and pure water flux (PWF) and BSA rejection. The hemocompatibility of the modified PES membranes was evaluated by human serum fibrinogen (FBG) protein adsorption, platelet adhesion, activated partial thromboplastin time (APTT) and prothrombin time (PT), and thrombin-antithrombin III (TAT), complement (C3a and C5a) activation and Ca2+ absorption on membrane. Results showed that by increasing POC concentration, FBG adsorption was reduced, less platelets adhesion, prolonged APTT and PT, lower TAT, C5a and C3a activation and absorb more Ca2+ ion. These results indicated that modification of PES with POC has rendered improved hemocompatibility properties for potential application in the field of blood purification, especially in hemodialysis.

A REVIEW OF ASSEMBLED POLYACRYLONITRILE-BASED CARBON NANOFIBER PREPARED ELECTROSPINNING PROCESS

Electrospinning is a very simple and versatile process by which polymer nanofibers with diameters ranging from a few nanometers to several micrometers can be produced using an electrostatically driven jet of polymer solution (or polymer melt). Significant progress has been made in this process throughout the last decade and the resultant nanostructures have been exploited to a wide range of applications. An important feature of the electrospinning process is that electrospinning nanofibers are produced in atmospheric air and at room temperature. This paper reviews the assembled polyacrylonitrile (PAN)-based carbon nanofibers with various processing parameters such as electrical potential, distance between capillary and collector drum, solution flow rate (dope extrusion rate), and concentration of polymer solution. The average fiber diameter would increase with increasing concentration of the polymer solution and the flow rate. Therefore, the screen distance could also increase but the average electrical potential of the fibers diameter decreases. Electrospinning process can be conducted at higher electrical potentials, lower flow rate, nearer screen distance, and higher concentrations of dope.

Separation of heavy metal and protein from wastewater by sulfonated polyphenylsulfone ultrafiltration membrane process prepared by glycine betaine enriched coagulation bath

This work deals with a simple and eco-friendly approach for the development of ultrafiltration membranes for the separation of environmentally hazardous substances from the water source. Polysulfone and sulfonated polyphenylsulfone blend ultrafiltration membranes were fabricated by the non-solvent induced phase inversion technique. Prepared membranes were characterized for their morphology, hydrophilicity, porosity, filtration and antifouling properties. The blend membranes with 15 wt% of sPPSU demonstrated the best performance with water flux of 190.33 Lm−2h−1 and flux recovery ratio of 86.56%. The effect of aq. glycine betaine (GB) coagulation bath on the membrane property and performance was studied and compared with commonly used additives such as NaCl and NMP. The GB in coagulation bath exhibited better flux and performance with protein rejection of 66.3%, 74.0% and 91.2% for trypsin, pepsin, and bovine serum albumin, respectively, and heavy metal rejection of 75.2% and 87.6% for polymer enhanced ultrafiltration of Cd2+ and Pb2+ ions, respectively.

Highly adsorptive oxidized starch nanoparticles for efficient urea removal

Portable dialysis is a need to implement daily and nocturnal hemodialysis. To realize portable dialysis, a dialysate regeneration system comprising superior adsorbents is required to regenerate the used dialysate. This study aims to develop a nano-adsorbent, derived from corn starch for urea removal. Oxidized starch nanoparticles (oxy-SNPs) were prepared via liquid phase oxidation, followed by chemical dissolution and non-solvent precipitation. The oxy-SNPs possessed Z-average size of 177.7 nm with carbonyl and carboxyl contents of 0.068 and 0.048 per 100 glucose units, respectively. The urea adsorption achieved the equilibrium after 4 h with 95% removal. The adsorption mechanism fitted Langmuir isotherm while the adsorption kinetics obeyed pseudo-second-order model. This new material has a maximum adsorption capacity of 185.2 mg/g with a rate constant of 0.04 g/mg.h. Moreover, the oxy-SNPs exhibited the urea uptake recovery of 91.6%. Oxy-SNPs can become a promising adsorbent for dialysate regeneration system to remove urea.

Nuclear Magnetic Resonance (NMR) Spectroscopy

Abstract Nowadays, nuclear magnetic resonance (NMR) spectroscopy is one of the most essential research tools in material science and engineering. It received a considerable interest in membrane technology that offers structural information [1], blend miscibility [2], blend phase morphology [3], and purity of polymers [4]. It provides details about the stability and degradation of the polymers such as degree of acetylation, degree of amination, and degree of sulfonation [5–8]. It is also used to predict the pore size distributions of the polymer matrix [9]. The main objective of this book chapter is to increase our knowledge of using NMR spectroscopy on membrane technology. In addition, the chemical nature and the surface features of polymeric membranes and their proton conductivity properties were correlated.