Monica V. Arcos-Hernandez

Integrated production of polyhydroxyalkanoates (PHAs) with municipal wastewater and sludge treatment at pilot scale

A pilot-scale process was operated over 22 months at the Brussels North Wastewater Treatment Plant (WWTP) in order to evaluate polyhydroxyalkanoate (PHA) production integration with services of municipal wastewater and sludge management. Activated sludge was produced with PHA accumulation potential (PAP) by applying feast-famine selection while treating the readily biodegradable COD from influent wastewater (average removals of 70% COD, 60% CODsol, 24% nitrogen, and 46% phosphorus). The biomass PAP was evaluated to be in excess of 0.4gPHA/gVSS. Batch fermentation of full-scale WWTP sludge at selected temperatures (35, 42 and 55 °C) produced centrate (6-9.4 gCODVFA/L) of consistent VFA composition, with optimal fermentation performance at 42 °C. Centrate was used to accumulate PHA up to 0.39 gPHA/gVSS. The centrate nutrients are a challenge to the accumulation process but producing a biomass with 0.5 gPHA/gVSS is considered to be realistically achievable within the typically available carbon flows at municipal waste management facilities.

Rapid quantification of intracellular PHA using infrared spectroscopy: An application in mixed cultures

Fourier transform infrared (FT-IR) spectroscopy is proposed for a method for rapid quantification of polyhydroxyalkanoates (PHA) in mixed culture bacterial systems. Spectra from 122 samples from a wide range of PHA production systems were studied. The spectra were collected in a library that was used to calibrate a partial least squares (PLS) model linking FT-IR spectra with PHA content in the biomass. The library of spectra contained samples with a range of total PHA content (0.03-0.58 w/w) as well as varying compositions (poly-(3-hydroxyvalerate) (3HV) content of 0-63% in Cmol basis). A robust PLS model was developed using calibration data from a diverse range of systems and PHA content. Coupling this model with FT-IR spectra has been shown to be applicable for predicting PHA content in mixed culture production systems. The method was used to reliably determine PHA content in biomass from a new, independent PHA production system with a standard error of prediction (RMSEP) value of 0.023 w/w, despite the complexity of the matrices. This method reduces the analytical time for PHA quantification down to under 30 min (5 min handling time was achieved when FT-IR equipment was immediately available), and eliminates hazardous waste by-products. The work has demonstrated a level of accuracy and reproducibility in quantifying PHA in mixed culture systems similar to that obtained from the GC analytical technique. Further work is required to enable the use of the method to analyze crystallinity related factors that may be useful towards quantifying poly-(3-hydroxybutyrate) and poly-(3-hydroxyvalerate) (3HB/3HV) composition. The method has been shown to be suitable for rapid quantification in large scale applications and in its present form is reliable for routine process monitoring.

Integration of biopolymer production with process water treatment at a sugar factory.

The present investigation has focused on generating a surplus denitrifying biomass with high polyhydroxyalkanoate (PHA) producing potential while maintaining water treatment performance in biological nitrogen removal. The motivation for the study was to examine integration of PHA production into the water treatment and residuals management needs at the Suiker Unie sugar beet factory in Groningen, the Netherlands. At the factory, process waters are treated in nitrifying-denitrifying sequencing batch reactors (SBRs) to remove nitrogen found in condensate. Organic slippage (COD) in waters coming from beet washing is the substrate used for denitrification. The full-scale SBR was mimicked at laboratory scale. In two parallel laboratory scale SBRs, a mixed-culture biomass selection strategy of anoxic-feast and aerobic-famine was investigated using the condensate and wash water from Suiker Unie. One laboratory SBR was operated as conventional activated sludge with long solids retention time similar to the full-scale (SRT >16 days) while the other SBR was a hybrid biofilm-activated sludge (IFAS) process with short SRT (4-6 days) for the suspended solids. Both SBRs were found to produce biomass with augmented PHA production potential while sustaining process water treatment for carbon, nitrogen and phosphorus for the factory process waters. PHA producing potential in excess of 60 percent g-PHA/g-VSS was achieved with the lab scale surplus biomass. Surplus biomass of low (4-6 days) and high (>16 days) solids retention time yielded similar results in PHA accumulation potential. However, nitrification performance was found to be more robust for the IFAS SBR. Assessment of the SBR microbial ecology based on 16sDNA and selected PHA synthase genes at full-scale in comparison to biomass from the laboratory scale SBRs suggested that the full-scale process was enriched with a PHA storing microbial community. However, structure-function relationships based on RNA levels for the selected PHA synthases could not be established and, towards this ambition, it is speculated that a wider representation of PHA synthesases would need to be monitored. Additionally at the factory, beet tail press waters coming from the factory beet residuals management activities are available as a carbon source for PHA accumulation. At pilot scale, beet tail press waters were shown to provide a suitable carbon source for mixed culture PHA production in spite of otherwise being of relatively low organic strength (≤ 10 g-COD/L). A copolymer of 3-hydroxybutyrate with 3-hydroxyvalerate (PHBV with 15% HV on a molar basis) of high thermal stability and high weight average molecular mass (980 kDa) was produced from the beet tail press water. The mixed culture accumulation process sustained PHA storage with parallel biomass growth of PHA storing bacteria suggesting a strategy to further leverage the utilization of surplus functional biomass from biological treatment systems. Integration of PHA production into the existing factory water management by using surplus biomass from condensate water treatment and press waters from beet residuals processing was found to be a feasible strategy for biopolymer production.

Crystallisation and fractionation of selected polyhydroxyalkanoates produced from mixed cultures.

Poly[R-3-hydroxybutyrate-co-(R-3-hydroxyvalerate)] (PHBV) copolymers were produced from mixed cultures of biomass (activated sludge) fed with acetic acid (HAc) and propionic acid (HPr). Feeding was performed in such a way as to produce materials with a wide range of monomer compositions and microstructures. Solvent-cast thin films of these materials have recently been shown to exhibit a narrow range of mechanical properties similar to those of the homopolymer poly(R-3-hydroxybutyrate) (PHB) [1]. In this work, more detailed analyses of the thermal and crystallisation properties of these mixed-culture polyesters have revealed that they like comprise complex blends with broad compositional distribution of random and/or blocky copolymers of very different 3-hydroxyvalerate (3HV) contents and melting temperatures and thus have very different respective crystallisation kinetics. This blend complexity was confirmed by solvent fractionation of selected samples. The findings support the hypothesis that overall mechanical properties of these complex copolymer blend materials will be strongly influenced by the more rapidly crystallising components that form the matrix within which the slower crystallising components exist as microdomains. New opportunities in the material development of PHAs are likely to be found in establishing and exploiting such structure-function relationships.

A process for polyhydroxyalkanoate (PHA) production from municipal wastewater treatment with biological carbon and nitrogen removal demonstrated at pilot-scale.

A process was developed for biological treatment of municipal wastewater for carbon and nitrogen removal while producing added-value polyhydroxyalkanoates (PHAs). The process comprised steps for pre-denitrification, nitrification and post-denitrification and included integrated fixed-film activated sludge (IFAS) with biofilm carrier media to support nitrification. In a pilot-scale demonstration (500-800L), wastewater treatment performance, in line with European standards, were achieved for total chemical oxygen demand (83% removal) and total nitrogen (80% removal) while producing a biomass that was able to accumulate up to 49% PHA of volatile suspended solids with acetic acid or fermented organic residues as substrates. Robust performance in wastewater treatment and enrichment of PHA-producing biomass was demonstrated under realistic conditions including influent variability during 225days of operation. The IFAS system was found to be advantageous since maintaining nitrification on the biofilm allowed for a relatively low (2days) solids retention time (SRT) for the suspended biomass in the bulk phase. Lower SRT has advantages in higher biomass yield and higher active fraction in the biomass which leads to higher PHA productivity and content. The outcomes show that production of added-value biopolymers may be readily integrated with carbon and nitrogen removal from municipal wastewater.

In-line monitoring of thermal degradation of PHA during melt-processing by Near-Infrared spectroscopy

Polyhydroxyalkanoate (PHA) biopolymer processing is often challenged by low thermal stability, meaning that the temperatures and time for which these polymers can be processed is restrictive. Considering the sensitivity of PHA to processing conditions, there is a demand for in-line monitoring of the material behaviour in the melt. This paper investigates the application of Near-Infrared (NIR) spectroscopy for monitoring the thermal degradation of PHAs during melt-processing. Two types of materials were tested: two mixed culture PHAs extracted from biomass produced in laboratory and pilot scale after an acidic pre-treatment, and two commercially available materials derived from pure culture production systems. Thermal degradation studies were carried out in a laboratory scale extruder with conical twin screws connected to a NIR spectrometer by a fibre optic to allow in situ monitoring. Multivariate data analysis methods were applied for assessing thermal degradation kinetics and predicted the degree of degradation as measured by (1)H NMR (proton nuclear magnetic resonance spectroscopy). The pre-treated mixed culture PHAs were found to be more thermally stable when compared with the commercial pure culture PHAs as demonstrated by NIR, (1)H NMR and GPC (gel permeation chromatography).

Fluxes in PHA-storing microbial communities during enrichment and biopolymer accumulation processes.

The use of mixed microbial cultures for the production of polyhydroxyalkanoates (PHAs) is emerging as a viable technology. In this study, 16S rRNA gene amplicon pyrosequencing was used to analyse fluctuations in populations over a 63-day period within a PHA-storing mixed microbial community enriched on fermented whey permeate. This community was dominated by the genera Flavisolibacter and Zoogloea as well as an unidentified organism belonging to the phylum Bacteroidetes. The population was observed to cycle through an increase in Zoogloea followed by a return to a community composition similar to the initial one (highly enriched in Flavisolibacter). It was found that the PHA accumulation capacity of the community was robust to population flux during enrichment and even PHA accumulation, with final polymer composition dependent on the overall proportion of acetic to propionic acids in the feed. This community adaptation suggests that mixed culture PHA production is a robust process.