Monika Gosecka
Polish Academy of Sciences
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Monika Gosecka.
Langmuir | 2011
Sarra Gam-Derouich; Monika Gosecka; Sandrine Lépinay; Mireille Turmine; Benjamin Carbonnier; Teresa Basinska; Stanislaw Slomkowski; Marie-Claude Millot; Ali Othmane; Dalila Ben Hassen-Chehimi; Mohamed M. Chehimi
Homopolymer grafts from α-tert-butoxy-ω-vinylbenzyl-polyglycidol (PGL) were prepared on gold and stainless steel (SS) substrates modified by 4-benzoyl-phenyl (BP) moieties derived from the electroreduction of the parent salt 4-benzoyl benzene diazonium tetrafluoroborate. The grafted BP aryl groups efficiently served to surface-initiate photopolymerization (SIPP) of PGL. In similar conditions, SIPP of hydroxyethyl methacrylate (HEMA) permitted the production of PHEMA grafts as model surfaces. Water contact angles were found to be 66°, 15°, and 0° for SS-BP, SS-PHEMA, and SS-PPGL, respectively. The spontaneous spreading of water drops on SS-PPGL was invariably observed with 1.5 μL water drops. PPGL thus appears as a superhydrophilic polymer. Resistance to nonspecific adsorption of proteins of PPGL and PHEMA grafts on gold was evaluated by surface plasmon resonance (SPR) using antibovine serum albumin (anti-BSA). The results conclusively show that PPGL-grafts exhibit enhanced resistance to anti-BSA adsorption compared to the well-known hydrophilic PHEMA. PPGL grafts were further modified with BSA through the carbonyldiimidazole activation of the OH groups providing immunosensing surfaces. The so-prepared PPGL-grafted BSA hybrids specifically interacted with anti-BSA in PBS as compared to antimyoglobin. It is clear that the superhydrophilic character of PPGL grafts opens new avenues for biomedical applications where surfaces with dual functionality, namely, specific protein grafting together with resistance to biofouling, are required.
Polymers | 2016
Mateusz Gosecki; Mariusz Gadzinowski; Monika Gosecka; Teresa Basinska; Stanislaw Slomkowski
Polyglycidol (or polyglycerol) is a biocompatible polymer with a main chain structure similar to that of poly(ethylene oxide) but with a –CH2OH reactive side group in every structural unit. The hydroxyl groups in polyglycidol not only increase the hydrophilicity of this polymer but also allow for its modification, leading to polymers with carboxyl, amine, and vinyl groups, as well as to polymers with bonded aliphatic chains, sugar moieties, and covalently immobilized bioactive compounds in particular proteins. The paper describes the current state of knowledge on the synthesis of polyglycidols with various topology (linear, branched, and star-like) and with various molar masses. We provide information on polyglycidol-rich surfaces with protein-repelling properties. We also describe methods for the synthesis of polyglycidol-containing copolymers and the preparation of nano- and microparticles that could be derived from these copolymers. The paper summarizes recent advances in the application of polyglycidol and polyglycidol-containing polymers as drug carriers, reagents for diagnostic systems, and elements of biosensors.
Colloid and Polymer Science | 2015
Monika Gosecka; Mateusz Gosecki
The design and synthesis of various polymer core–shell particles result from their distinct characteristics, which combine the properties of two or more components into one material. Many accessible synthetic strategies for obtaining polymer core–shell particles lead to the formation of particles for which the internal morphology differs from the ideal core–shell structure. Understanding the precise morphology characteristics is important for mechanistic studies of particle formation, which ultimately results in the design of particles for specific structures and properties. The detailed characteristics of complex polymer particle structures are complicated and require more than one method. This review focuses on imaging methods such as transmission electron microscopy (TEM), cryo-TEM, scanning transmission electron microscopy (STEM) and confocal fluorescence microscopy that reveal the radial redistribution of the components and methods for the quantitative analysis of individual phases (core, shell and interfacial layer), such as small-angle X-ray scattering (SAXS), small-angle neutron scattering (SANS), differential scanning calorimetry (DSC) and nuclear magnetic resonance (NMR). Methods that can determine the surface composition and makeup of the character of interfacial layer (gradient or containing small domains, etc.) were also reviewed.
Langmuir | 2016
Monika Wasilewska; Zbigniew Adamczyk; Teresa Basinska; Monika Gosecka; Dawid Lupa
The kinetics of the self-assembly of poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol) microparticles on poly(allylamine hydrochloride)-derivatized silicon/silica substrate was determined by direct AFM imaging and streaming potential (SP) measurements. The kinetic runs acquired under diffusion-controlled transport were quantitatively interpreted in terms of the extended random sequential adsorption (RSA) model. This allowed confirmation of a core/shell morphology of the microparticles. The polyglycidol-rich shell of thickness equal to 25 nm exhibited a fuzzy structure that enabled penetration of particles into each other resulting in high coverage inaccessible for ordinary microparticles. The SP measurements interpreted by using the 3D electrokinetic model confirmed this microparticle structure. Additionally, the acid-base characteristics of the microparticle monolayers were determined for a broad pH range. By using the streaming potential measurements, human serum albumin (HSA) adsorption on the microparticle monolayers was investigated under in situ conditions. It was confirmed that the protein adsorption was considerably lower than for the reference case of bare silicon/silica substrate under the same physicochemical conditions. This effect was attributed to the presence of the shell diminishing the protein/microparticle physical interactions.
Langmuir | 2017
Maria Morga; Zbigniew Adamczyk; Teresa Basinska; Patrycja Komar; Monika Gosecka; Paulina Żeliszewska; Monika Wasilewska
An efficient method was developed enabling the synthesis of spheroidal polymer microparticles. Thorough physicochemical characteristics of the particles were acquired comprising the size, shape, electrophoretic mobility, and the diffusion coefficient. The particles were monodisperse, and their shape was well-fitted by prolate spheroids having the axis ratio equal to 4.17. Knowing the diffusion coefficient, their hydrodynamic diameter of 449 nm was calculated, which matched the value derived from Brenners analytical expression. Particle deposition kinetics on mica and silicon/silica substrates, modified by poly(allylamine hydrochloride) (PAH) adsorption, was studied by optical microscopy and AFM imaging. The validity of the random sequential adsorption model was confirmed. Additionally, monolayers of the particles on these substrates were thoroughly characterized in situ by the streaming potential measurements for different ionic strengths. These measurements confirmed that the ζ potential change with the spheroidal particle coverage is less abrupt than for spheres and agrees with theoretical predictions. Exploiting these results, a useful analytical expression was derived that allows one to calculate the spheroidal particle coverage in situ via the streaming potential measurements. This expression, especially accurate for low coverage range, can be used for a quantitative interpretation of adsorption and desorption kinetics of anisotropic macromolecules, e.g., proteins on solid substrates.
Soft Matter | 2018
Monika Gosecka; Malgorzata Urbaniak; Maciej Mikina; Mateusz Gosecki; Artur Rozanski
We present an unexpected self-assembly of a glycoluril clip-poly(ε-caprolactone) conjugate in chloroform. The conjugate forms homodimer aggregates due to supramolecular interactions between glycoluril moieties, which was confirmed with MALDI-TOF-ms and 1H NMR. TEM revealed the formation of multilayered nanosized prism-shaped objects resembling tree bark in nature.
Colloids and Surfaces B: Biointerfaces | 2017
Monika Gosecka; Mohamed M. Chehimi; Teresa Basinska; Stanislaw Slomkowski; Tomasz Makowski
We investigated the distribution of polyglycidol and polystyrene on the surface of poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol) microspheres (random distribution or segregated into hydrophilic and hydrophobic patches), using fibrinogen (Fb) as a macromolecular probe. The fibrinogen was adsorbed or covalently attached to the surface of the poly(styrene-co-α-tert-butoxy-ω-vinylbenzyl-polyglycidol) (P(S/PGLy)) microspheres. The P(S/PGLy) particles were prepared by emulsion copolymerization of styrene and α-tert-butoxy-ω-vinylbenzyl-polyglycidol (PGLy) macromonomer initiated with potassium persulfate. The polymerizations yielded P(S/PGLy) particles with various surface fractions of polyglycidol, depending on the amount of added macromonomer and the addition process. In some syntheses, the entire macromonomer amount was added once at the beginning of the polymerization, while in others, the macromonomer was added gradually after the formation of particle seeds from pure polystyrene. XPS studies revealed that the fraction of polyglycidol in the interfacial layer of the microspheres was larger when the entire amount of macromonomer was added at the beginning of the polymerization than when it was added after formation of the polystyrene seeds. Studies of fibrinogen adsorption provided the first evidence of segregation of the hydrophobic (polystyrene) and hydrophilic (polyglycidol) components at the surface of the composite P(S/PGLy) microspheres into patches. The hydrophobic patches are composed mainly of polystyrene. However, they also contain a small amount of polyglycidol chains, making the adsorption of fibrinogen weaker than the adsorption onto the pure polystyrene. Studies of covalent immobilization of fibrinogen on the microspheres via 1,3,5-trichlorotriazine confirmed these findings.
Biomacromolecules | 2017
Mateusz Gosecki; Slawomir Kazmierski; Monika Gosecka
We present biocompatible hydrogel systems suitable for biomineralization processes based on hyperbranched polyglycidol cross-linked with acrylamide copolymer bearing carbonyl-coordinated boronic acid. At neutral pH, diol functional groups of HbPGL react with boronic acid of polyacrylamide to generate 3D network in water by the formation of boronic ester cross-links. The dynamic associative/dissociative characteristics of the cross-links makes the network reversible. The presented hydrogels display self-healing properties and are injectable, facilitating gap filing of bone tissue. The 1H HR MAS DOSY NMR studies reveal that acrylamide copolymer plays the role of the network framework, whereas HbPGL macromolecules, due to their compact structure, move between reactive sites of the copolymer. The influence of the copolymer macromolecules entanglements and overall polymer concentrations on macromolecules mobility and stress relaxation processes is investigated. The process of hydrogel biomineralization results from hydrolysis of 1-naphthyl phosphate calcium salt catalyzed by encapsulation in hydrogel alkaline phosphatase. The environment of the hydrogel is entirely neutral toward the enzyme. However, the activity of alkaline phosphatase encapsulated within the hydrogel structure is diffusion-limited. In this article, based on the detailed characteristics of three model hydrogel systems, we demonstrate the influence of the hydrogel permeability on the encapsulated enzyme activity and calcium phosphate formation rate. The 1H HR MAS DOSY NMR is used to monitor diffusion low-molecular weight compound within hydrogels, whereas 31P HR MAS NMR facilitates monitoring of the progress of biomineralization in situ within hydrogels. The results show a direct correlation between low molecular diffusivity in hydrogels and network dynamics. We demonstrate that the morphology of in situ-generated calcium phosphate within three model HbPGL/poly(AM-ran-APBA) hydrogels of different low molecular permeability varies substantially from sparsely deployed large, well-defined crystals to an even distribution within the polymers polycrystalline continuous network.
Polimery | 2013
Andrzej Dworak; Stanislaw Slomkowski; Teresa Basinska; Monika Gosecka; Wojciech Wałach; Barbara Trzebicka
Colloid and Polymer Science | 2011
Monika Gosecka; Nébéwia Griffete; Claire Mangeney; Mohamed M. Chehimi; Stanislaw Slomkowski; Teresa Basinska