Monika Möder

Application of accelerated solvent extraction followed by gas chromatography, high-performance liquid chromatography and gas chromatography–mass spectrometry for the determination of polycyclic aromatic hydrocarbons, chlorinated pesticides and polychlorinated dibenzo-p-dioxins and dibenzofurans in solid wastes

Accelerated solvent extraction (ASE) is a new method for the extraction of organic compounds from soils, sludges and other wastes. Due to the elevated temperatures and pressures, the ASE is a time-saving procedure with low consumption of solvents. Applications of this procedure for the determination of chlorinated pesticides in contaminated soils, for the determination of polycyclic aromatic hydrocarbons in heap material, slurry from copper smelting (Theissenschlamm) and soils and for the determination of polychlorinated dibenzo-p-dioxins and dibenzofurans in a fly ash sample are given. Optimization of the procedure relating to extraction time, number of extractions and solvents is described. Comparisons with other extraction methods (Soxhlet extraction and automated Soxhlet extraction) are carried out.

Biodegradation of endocrine-disrupting compounds and suppression of estrogenic activity by ligninolytic fungi

Endocrine-disrupting compounds (EDCs) represent a large group of substances of natural and anthropogenic origin. They are widely distributed in the environment and can pose serious risks to aquatic organisms and to public health. In this study, 4-n-nonylphenol, technical 4-nonylphenol, bisphenol A, 17alpha-ethinylestradiol, and triclosan were biodegraded by eight ligninolytic fungal strains (Irpex lacteus 617/93, Bjerkandera adusta 606/93, Phanerochaete chrysosporium ME 446, Phanerochaete magnoliae CCBAS 134/I, Pleurotus ostreatus 3004 CCBAS 278, Trametes versicolor 167/93, Pycnoporus cinnabarinus CCBAS 595, Dichomitus squalens CCBAS 750). The results show that under the used conditions the fungi were able to degrade the EDCs within 14d of cultivation with exception of B. adusta and P. chrysosporium in the case of triclosane and bisphenol A, respectively. I. lacteus and P. ostreatus were found to be most efficient EDC degraders with their degradation efficiency exceeding 90% or 80%, respectively, in 7d. Both fungi degraded technical 4-nonylphenol, bisphenol-A, and 17alpha-ethinylestradiol below the detection limit within first 3d of cultivation. In general, estrogenic activities assayed with a recombinant yeast test decreased with advanced degradation. However, in case of I. lacteus, P. ostreatus, and P. chrysosporium the yeast assay showed a residual estrogenic activity (28-85% of initial) in 17alpha-ethinylestradiol cultures. Estrogenic activity in B. adusta cultures temporally increased during degradation of technical 4-nonylphenol, suggesting a production of endocrine-active intermediates. Attention was paid also to the effects of EDCs on the ligninolytic enzyme activities of the different fungi strains to evaluate their possible stimulation or suppression of activities during the biodegradation processes.

Synthesis of a molecularly imprinted polymer and its application for microextraction by packed sorbent for the determination of fluoroquinolone related compounds in water.

Molecularly imprinted polymer (MIP) has been synthesized by precipitation polymerization using ciprofloxacin (CIP) as template for the analysis of fluoroquinolone antibiotics (FQs). This MIP material was packed as sorbent in a device for microextraction by packed sorbent (MEPS) combined with liquid chromatography-tandem mass spectrometry (LC-MS/MS) for the analysis of selected FQs drugs including CIP, norfloxacin (NOR) and ofloxacin (OFLO) in municipal wastewater samples. In comparison to the new MIP-MEPS procedure, the target compounds were also determined by solid-phase extraction (MISPE) using the new molecular imprinted polymer material to validate the new MIP-MEPS method. The ability of the MIP for molecular recognition of CIP, NOR and OFLO was proved in presence of structurally different environmental relevant substances such as quinolones (Qs), flumequine (FLU), di(methyl)phthalate (DMP), technical 4-nonylphenol (NP), caffeine, Galaxolide(®), Tonalid(®), di(butyl)phthalate (DBP), Triclosan, bisphenol-A (BPA), carbamazepine, di(ethylhexyl)phthalate (DEHP), estradiol and octocrylene. The analysis of wastewater samples revealed the high selectivity of the synthesized polymer which was able to recognize and retain the target analytes by both extraction methods, the offline SPE with MIP material and the semi-automated MEPS packed with MIP material.

Degradation of the antibiotics norfloxacin and ciprofloxacin by a white-rot fungus and identification of degradation products.

More than 90% of the antibiotics ciprofloxacin (CIPRO) and norfloxacin (NOR) at 2 mg L(-1) were degraded by Trametes versicolor after 7 days of incubation in malt extract liquid medium. In in vitro assays with purified laccase (16.7 nkat mL(-1)), an extracellular enzyme excreted constitutively by this fungus, 16% of CIPRO was removed after 20 h. The addition of the laccase mediator 2,2-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) diammonium salt led to 97.7% and 33.7% degradation of CIPRO and NOR, respectively. Inhibition of CIPRO and NOR degradation by the cytochrome P450 inhibitor 1-aminobenzotriazole suggests that the P450 system also plays a role in the degradation of the two antibiotics. Transformation products of CIPRO and NOR were monitored at different incubation times by triple-quadrupole and quadrupole time-of-flight mass spectrometry, and can be assigned to three different reaction pathways: (i) oxidation of the piperazinyl substituent, (ii) monohydroxylation, and (iii) formation of dimeric products.

Study of fungal degradation products of polycyclic aromatic hydrocarbons using gas chromatography with ion trap mass spectrometry detection

Representatives of polycyclic aromatic hydrocarbons (PAHs) were degraded by ligninolytic fungus Irpex lacteus. The products were analyzed by GC-Ion trap mass spectrometry. The combination of full scan mass spectra, product ion scans (MS-MS) and derivatization of the degradation products of anthracene, phenanthrene, fluoranthene and pyrene provided further insight in the degradation mechanism initiated by I. lacteus. Particularly, the product ion scans enabled the interpretation of unknown degradation products, even though they were only produced at trace level. Most of the structures suggested were later confirmed with authentic standards.

Selective determination of estrogenic compounds in water by microextraction by packed sorbents and a molecularly imprinted polymer coupled with large volume injection-in-port-derivatization gas chromatography–mass spectrometry

A fully automated protocol consisting of microextraction by packed sorbents (MEPS) coupled with large volume injection-in-port-derivatization-gas chromatography-mass spectrometry (LVI-derivatization-GC-MS) was developed to determine endocrine disrupting compounds (EDCs) such as alkylphenols, bisphenol A, and natural and synthetic hormons in river and waste water samples. During method optimization, the extraction parameters as ion strength of the water sample, the MEPS extraction regime, the volume of organic solvent used for the elution/injection step, the type of elution solvents and the selectivity of the sorbents were studied. For optimum in-port-derivatization, 10 μL of the derivatization reagent N,O-bis(trimethylsilyl)triufloroacetamide with 1% of trimethylchlorosilane (BSTFA+1% TMCS) was used. 17β-Estradiol-molecularly imprinted polymer (MIP) and silica gel (modified with C-18) sorbents were examined for the enrichment of the target analytes from water samples and the obtained results revealed the high selectivity of the MIP material for extraction of substances with estrogen-like structures. Recovery values for most of the analytes ranged from 75 to 109% for the C18 sorbent and from 81 to 103% for the MIP material except for equilin (on C18 with only 57-66% recovery). Precision (n=4) of the entire analysis protocol ranged between 4% and 22% with both sorbents. Limits of detection (LODs) were at the low ngL(-1) level (0.02-87, C18 and 1.3-22, MIP) for the target analytes.

Semi-automated hollow-fibre membrane extraction, a novel enrichment technique for the determination of biologically active compounds in water samples

An automated hollow fibre membrane extraction technique was developed for the GC-MS determination of pharmaceutical and endocrine disrupting compounds in water samples. Enrichment was carried out inside a porous polypropylene hollow fibre membrane, which separated the aqueous and organic phases and regulated the transfer of analytes. n-Octanol placed inside the hollow fibre was used as the acceptor solution. A water-solvent ratio of about 300:1 was used to concentrate the analytes. After 1 hours extraction of the water sample under magnetic stirring, 1 microl of the n-octanol phase was automatically injected from the hollow fibre into the GC-MS. Development work included examining the influence of different sample matrices, volumes, extraction times and extraction solvents. The detection limits, linearity and standard deviations of the method were determined using drugs such as ibuprofen, phenazone and carbamazepine as well as the endocrine disrupting compounds. technical nonylphenols, bisphenol A, 17alpha-ethinylestradiol and tonalide by way of example.

Determination of polycyclic aromatic hydrocarbons in waste water by off-line coupling of solid-phase microextraction with column liquid chromatography

A new method for the determination of polycyclic aromatic hydrocarbons (PAHs) in waste water using solvent-free solid-phase microextraction (SPME) is described. The PAHs are extracted with a 100 microm polydimethylsiloxane (PDMS) fiber, desorbed in 40 microl acetonitrile and measured with LC and fluorescence detection. The detection limits of this very simple method under the given conditions (extraction from 5 ml sample, extraction time 1 h) are in the range of 1-6 ng l(-1). The standard deviations (n = 6) at a concentration level of 0.8 microg l(-1) are between 1.8 and 14.4%. The procedure was used for the determination of PAHs in contaminated water samples.

Plant--rhizosphere-microflora association during phytoremediation of PAH-contaminated soil.

The capability of plants to promote the microbial degradation of pollutants in rhizosphere soil is a principal mechanism of phytoremediation of PAH-contaminated soil. The formation of a specific rhizosphere microbocenosis with a high degradative potential toward contaminants is largely determined by plant species. The comparative PAH-degradation in unplanted soil and in soil planted with reed (Phragmites australis) and alfalfa (Medicago sativa) was studied in pot experiments during 2 years. Both alfalfa and reed successfully remediated contaminated soil by degrading 74.5 and 68.7% of PAHs, respectively. The study of the rhizosphere, rhizoplane, and unplanted-soil microflora in experimental pots showed that alfalfa stimulated the rhizosphere microflora of PAH-contaminated soil more effectively than did reed. Alfalfa clearly enhanced both the total number of microorganisms (1.3 times, according to fluorescence microscopy data) and the rate of the PAH-degrading population (almost seven times, according to plate counting). The degradative potential of its rhizosphere microflora toward PAHs was higher than the degradative activity of the reed rhizosphere. This study provides relevant information for the successful application of alfalfa to phytoremediate PAH-contaminated soil.

Stir bar sorptive extraction of parabens, triclosan and methyl triclosan from soil, sediment and sludge with in situ derivatization and determination by gas chromatography–mass spectrometry

The aim of this research work was the evaluation of stir-bar sorptive extraction (SBSE) in combination with an in situ derivatization to determine parabens (methylparaben, isopropylparaben, n-propylparaben, butylparaben and benzylparaben), triclosan and methyltriclosan in soil samples. This is the first time that this approach has been applied to the determination of these compounds in soil samples, providing important advantages over conventional extraction techniques, such as minimization of sampling handling, complete elimination of the use of organic solvents and simplification of the analytical procedure with reduced time consumption. The enriched target analytes were desorbed thermally using a thermodesorption system coupled to a gas chromatograph and a mass spectrometer. The optimized derivatization and SBSE extraction conditions, as well as the analytical characteristics of the method were obtained using spiked soil samples. The proposed methodology proved to be easy to use and sensitive, with limits of detection between 80 ng/kg and 1.06 μg/kg, and reproducibility values below 13%. The accuracy of the method was evaluated at two concentration levels, obtaining apparent recoveries between 91% and 110%. The matrix composition significantly influenced the extraction procedure, and a need to adopt a standard additions protocol is apparent. The analytes assayed were determined successfully in different environmental soil samples.