Montse Mari

Exposure to heavy metals and PCDD/Fs by the population living in the vicinity of a hazardous waste landfill in Catalonia, Spain: Health risk assessment

Most fly ashes produced in municipal waste incinerators of Catalonia (Spain) are deposited in a hazardous waste landfill (HWL) placed in Castellolí (Barcelona). This facility means a concern for the population living nearby. In response to this, we performed a probabilistic study focused on assessing human health risks derived from environmental exposure to heavy metals and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) around the HWL. Concentrations of various metals and PCDD/Fs were determined in soil and air samples collected at the HWL, and in 4 locations around it. Health risks were evaluated according to the distance from the sampling locations to the HWL (near and far-sites). In general terms, metal and PCCD/F levels were relatively low in air and soil samples. However, concentrations of PCDD/Fs, as well as those of some metals, were found to be relatively higher in the HWL and Castellolí (the nearest village) samples than in those collected far away, resulting in a slight increase of exposure to those pollutants. Anyhow, the current concentrations of metals and PCDD/Fs suggest that it is highly unlikely that there are any additional non-carcinogenic and carcinogenic risks for the population living near the HWL.

Multi-compartmental environmental surveillance of a petrochemical area: Levels of micropollutants

Since 2002, the chemical/petrochemical industrial zone of Tarragona County (Catalonia, Spain) is being annually monitored. As part of the environmental surveillance program, in this study the levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs), polycyclic aromatic hydrocarbons (PAHs), and metals (As, Cd, Cr, Hg, Mn, Pb and V) were determined in soil and vegetation samples collected in 4 areas of Tarragona County (chemical, petrochemical, urban/residential, and unpolluted). Moreover, the airborne concentrations of the same micropollutants were determined in each area. In soil samples, significant higher levels of PCNs and higher concentrations of PCDD/Fs and PAHs were found in the urban zone. PCDD/F levels in vegetation samples significantly decreased from 2002. The concentrations of Cr in soil samples, as well as V levels in vegetation samples collected in the vicinity of an oil refinery were significantly higher than those found in the unpolluted zones. A significant and progressive increase in V concentrations was also noted. The current results clearly indicate that the petrochemical industry is still being an important focus of inorganic pollution for the surrounding environment. In air, the higher amount of the 7 carcinogenic PAHs suggests a relatively greater impact on the petrochemical and urban areas. The temporal trend of the global pollution was also studied an Integral Risk Index was applied.

Partial replacement of fossil fuel in a cement plant: risk assessment for the population living in the neighborhood.

In cement plants, the substitution of traditional fossil fuels not only allows a reduction of CO(2), but it also means to check-out residual materials, such as sewage sludge or municipal solid wastes (MSW), which should otherwise be disposed somehow/somewhere. In recent months, a cement plant placed in Alcanar (Catalonia, Spain) has been conducting tests to replace fossil fuel by refuse-derived fuel (RDF) from MSW. In July 2009, an operational test was progressively initiated by reaching a maximum of partial substitution of 20% of the required energy. In order to study the influence of the new process, environmental monitoring surveys were performed before and after the RDF implementation. Metals and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were analyzed in soil, herbage, and air samples collected around the facility. In soils, significant decreases of PCDD/F levels, as well as in some metal concentrations were found, while no significant increases in the concentrations of these pollutants were observed. In turn, PM(10) levels remained constant, with a value of 16μgm(-3). In both surveys, the carcinogenic and non-carcinogenic risks derived from exposure to metals and PCDD/Fs for the population living in the vicinity of the facility were within the ranges considered as acceptable according to national and international standards. This means that RDF may be a successful choice in front of classical fossil fuels, being in accordance with the new EU environmental policies, which entail the reduction of CO(2) emissions and the energetic valorization of MSW. However, further long-term environmental studies are necessary to corroborate the harmlessness of RDF, in terms of human health risks.

Use of sewage sludge as secondary fuel in a cement plant: human health risks.

Since 2008, sewage sludge is being used as alternative fuel in a cement plant placed in Vallcarca (Catalonia, Spain). To evaluate the temporal trend of the environmental levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and a number of metals (As, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Sn, Tl, V, and Zn), as well as the potentially associated human health risks, samples of soil, herbage, and air were collected around the facility, after approximately one year of the permanent partial substitution of fuel. The temporal evolution of the pollutant levels was assessed by comparing the measured concentrations (2009) with those from samples collected in previous surveys (2003 and 2006) at the same sampling sites. The concentrations of PCDD/Fs in herbage and soil were 0.10 and 1.11 ng I-TEQ·kg⁻¹ dw, respectively, values very similar to those found in our previous surveys. For metals, although a clear tendency could not be observed, there were fluctuations through time. In this study, the levels of metals, which had not been analyzed in previous campaigns, were also determined in air, additionally to soil and vegetation. Airborne metal concentrations were similar to those found in other industrial areas worldwide. The human health risks for the population living around the cement plant were comparable to those obtained in previous studies, when petroleum coke was exclusively used as combustible, being in both cases tolerable according to the international standards.

Monitoring PCDD/Fs, PCBs and metals in the ambient air of an industrial area of Catalonia, Spain

In 2005 and 2006, the levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and metals (As, Be, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sn, Tl and V) were measured in air samples collected in an industrial area of Sant Adrià del Besòs (Barcelona, Catalonia, Spain) where a municipal solid waste incinerator (MSWI) is placed, and in a background/control area. In general terms, concentrations of all environmental pollutants were higher at the industrial site. No significant seasonal/temporal variations were observed in any of the areas. No Pearson correlation was found between the PCDD/F concentrations and the environmental conditions of the two sampling periods considered. Principal component analyses (PCA) were performed to get information on the relationship among samples, pollutants, and emission sources. The results indicate that the MSWI of S. Adrià de Besòs is not a significant emission source of the above compounds for the area under its direct influence. Moreover, a notable difference in the PCDD/F congener profiles was found between ambient air and stack gas emissions, indicating that the current levels of PCDD/Fs are more related to other potential emissions sources rather than to those from the MSWI.

POP accumulation in the food chain: Integrated risk model for sewage sludge application in agricultural soils

Because of its benefits to soil and crops, sewage sludge application on agricultural soils is a managing practice of increasing use. However, this practice may lead to contamination of the food chain, especially by persistent organic pollutants (POPs). The main objective of this study was to integrate probabilistic multimedia models to predict the accumulation of POPs in the food chain and the related risks to humans, as a consequence of sludge application on soil. For that, four models were integrated: (i) soil fate, (ii) plant, (iii) food chain and (iv) exposure and risk. These models were applied for two scenarios (occupational and non-occupationally exposed populations) in a time span of 30 years. The variability of the inputs and outputs was also considered. The model was applied to a case-study of 4 POPs (2,3,7,8TCDD, PCB 180, benzo(a)pyrene, and dibenzo(a,h)anthracene) in an agricultural soil located in Catalonia (NE of Spain). Some differences in cancer risk due to POP exposure were appreciated between both evaluated scenarios. However, all values were below the threshold levels. With the exception of 2,3,7,8TCDD, all the contaminants reached steady state on soil in the first five years of the evaluation. Concentration levels in food (vegetables, meat and milk) were linearly correlated to those in soils. Air inhalation was noted to be an occupational exposure route of minor importance. Sensitivity analysis for 2,3,7,8TCDD showed that exposure parameters were responsible for most of the variability in the results.

Environmental monitoring of metals, PCDD/Fs and PCBs as a complementary tool of biological surveillance to assess human health risks.

The results of an environmental program around the municipal solid waste incinerator (MSWI) of Mataró (Catalonia, Spain), which was designed to assess the potential impact of the facility on the close environment and the health of the population living in the vicinity, are here reported. Metals, polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs) were analyzed in soil and air samples collected in/around the facility. In soils, Mn and Zn showed the highest metal concentrations (ranges: 136-648 mg kg(-1) and 29.6-97.8 mg kg(-1), respectively), while total concentrations of PCDD/Fs and PCBs were 0.14-0.46 ng WHO-TEQ kg(-1) and 167-3340 ng kg(-1), respectively. In air, the highest metal levels corresponded to Cu (range: 26.9-52.9 ng m(-3)) and Mn (range: 6.92-19.3 ng m(-3)), while those of PCDD/Fs and PCBs ranged 0.008-0.015 pg WHO-TEQ m(-3) and 9.20-42.1 pg m(-3), respectively. Carcinogenic and non-carcinogenic risks derived of exposure to metals, PCDD/Fs and PCBs did not exceed the threshold values. Complementarily analyzed with the results obtained in the concurrent biomonitoring study and the stack emissions, data indicate that the MSWI of Mataró does not mean significant human health risks derived of emissions of metals, PCDD/Fs and PCBs.

Monitoring Environmental Pollutants in the Vicinity of a Cement Plant: A Temporal Study

From 2008 to 2009, we evaluated the environmental impact of a cement plant (Montcada i Reixac, Catalonia, Spain) that is located close to densely populated areas. The potential health risks for the population living in the neighborhood were also assessed. The levels of various heavy metals and the concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were determined in soil, vegetation, and air samples collected at different directions and distances from the facility. Three 6-monthly consecutive campaigns were performed to establish temporal and seasonal trends. Multivariate statistical techniques, such as principal component analysis, were used. Human exposure to metals and PCDD/Fs, as well as the associated carcinogenic and noncarcinogenic risks, were also calculated. Environmental pollutant concentrations, especially those found in urban sites, were noted to be slightly higher than those recently reported around other cement plants in Catalonia. A seasonal pattern was observed, with higher values recorded during the colder sampling periods. Despite this, the carcinogenic and noncarcinogenic risks derived from human exposure to metals and PCDD/Fs were within the ranges considered acceptable by international regulatory organisms.

Modification of an environmental surveillance program to monitor PCDD/Fs and metals around a municipal solid waste incinerator

Since the mid-90s, an environmental surveillance program has been on-going to provide information on the levels of PCDD/Fs and various metals in soil and vegetation samples collected in the vicinity of a municipal solid waste incinerator (MSWI) in Tarragona (Catalonia, Spain). However, the presence of other potential sources of pollution in the zone, such as traffic, forest fires, local industries, etc., makes hard to determine the impact concerning the MSWI. Therefore, in 2007 a change in the monitoring program was implemented by collecting additional ambient air samples through active and passive sampling devices. Mean PCDD/F levels in herbage and soil were 0.10 ng I-TEQ/kg dry weight (range: 0.05–0.17 ng I-TEQ/kg dw) and 0.64 ng I-TEQ/kg dw (range: 0.13–2.41 ng I-TEQ/kg dw), respectively. A significant reduction of the PCDD/F concentration in both monitors was observed with respect to our previous surveys. Air mean concentrations of PCDD/Fs were 12.04 and 15.21 fg WHO-TEQ/m3 in 2007 and 2008, respectively, meaning a non-significant increase of 26%. In addition, a generalized increase of environmental metal levels with respect to our baseline study was not observed. The current concentrations of PCDD/Fs and metals in the vicinity of the MSWI of Tarragona are relatively low in comparison with other areas under the influence of emissions from waste incinerators. This indicates that the environmental impact of the MSWI of Tarragona is not significant. Moreover, the modification of the surveillance program has proven to be successful.

Climate change and environmental concentrations of POPs: A review

In recent years, the climate change impact on the concentrations of persistent organic pollutants (POPs) has become a topic of notable concern. Changes in environmental conditions such as the increase of the average temperature, or the UV-B radiation, are likely to influence the fate and behavior of POPs, ultimately affecting human exposure. The state of the art of the impact of climate change on environmental concentrations of POPs, as well as on human health risks, is here reviewed. Research gaps are also identified, while future studies are suggested. Climate change and POPs are a hot issue, for which wide attention should be paid not only by scientists, but also and mainly by policy makers. Most studies reported in the scientific literature are focused on legacy POPs, mainly polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and pesticides. However, the number of investigations aimed at estimating the impact of climate change on the environmental levels of polycyclic aromatic hydrocarbons (PAHs) is scarce, despite of the fact that exposure to PAHs and photodegradation byproducts may result in adverse health effects. Furthermore, no data on emerging POPs are currently available in the scientific literature. In consequence, an intensification of studies to identify and mitigate the indirect effects of the climate change on POP fate is needed to minimize the human health impact. Furthermore, being this a global problem, interactions between climate change and POPs must be addressed from an international perspective.