Moses Chung

Analysis of continuously rotating quadrupole focusing channels using generalized Courant-Snyder theory

By extending the recently developed generalized Courant-Snyder theory for coupled transverse beam dynamics, we have constructed the Gaussian beam distribution and its projections with arbitrary mode emittance ratios. The new formulation has been applied to a continuously rotating quadrupole focusing channel because the basic properties of this channel are known theoretically and could also be investigated experimentally in a compact setup such as the linear Paul trap configuration. The new formulation retains a remarkably similar mathematical structure to the original Courant-Snyder theory, and thus, provides a powerful theoretical tool to investigate coupled transverse beam dynamics in general and more complex linear focusing channels.

Pressurized rf cavities in ionizing beams

A muon collider or Higgs factory requires significant reduction of the six dimensional emittance of the beam prior to acceleration. One method to accomplish this involves building a cooling channel using high pressure gas filled radio frequency cavities. The performance of such a cavity when subjected to an intense particle beam must be investigated before this technology can be validated. To this end, a high pressure gas filled radio frequency (rf) test cell was built and placed in a 400 MeV beam line from the Fermilab linac to study the plasma evolution and its effect on the cavity. Hydrogen, deuterium, helium and nitrogen gases were studied. Additionally, sulfur hexafluoride and dry air were used as dopants to aid in the removal of plasma electrons. Measurements were made using a variety of beam intensities, gas pressures, dopant concentrations, and cavity rf electric fields, both with and without a 3 T external solenoidal magnetic field. Energy dissipation per electron-ion pair, electron-ion recombination rates, ion-ion recombination rates, and electron attachment times to

Beam envelope calculations in general linear coupled lattices

SF_6

Thermal neutron flux monitors based on vibrating wire

and

Precise out-vacuum proton beam monitoring system based on vibrating wire

O_2

Measurement of transmission efficiency for 400 MeV proton beam through collimator at Fermilab MuCool Test Area using Chromox-6 scintillation screen

were measured.

Handbook for Gas Filled RF Cavity Aficionados

The envelope equations and Twiss parameters (β and α) provide important bases for uncoupled linear beam dynamics. For sophisticated beam manipulations, however, coupling elements between two transverse planes are intentionally introduced. The recently developed generalized Courant-Snyder theory offers an effective way of describing the linear beam dynamics in such coupled systems with a remarkably similar mathematical structure to the original Courant-Snyder theory. In this work, we present numerical solutions to the symmetrized matrix envelope equation for β which removes the gauge freedom in the matrix envelope equation for w. Furthermore, we construct the transfer and beam matrices in terms of the generalized Twiss parameters, which enables calculation of the beam envelopes in arbitrary linear coupled systems.

Effects of scanning speed on the laser beam profile measurements by vibrating wire

Abstract Two types of neutron monitors with fine spatial resolutions are proposed based on vibrating wires. In the first type, neutrons interact with a vibrating wire, heat it, and lead to the change of its natural frequency, which can be precisely measured. To increase the heat deposition during the neutron scattering, the use of gadolinium layer that has the highest thermal neutron capture cross-section among all elements is proposed. The second type uses the vibrating wire as a “resonant target.” Besides the measurement of beam profile according to the average signal, the differential signal synchronized with the wire oscillations defines the beam profile gradient. The monitor׳s spatial resolution is defined by the wire׳s diameter.

Fast resonant target vibrating wire scanner for photon beam

As an instrument for Korea Multi-purpose Accelerator Complex (KOMAC) facility proton beam profiling, a vibrating wire monitor (VWM) has been installed and tested at TR23 target room. Experiments were done at very low (100 nA) beam current conditions. At the number of particles about 1011 proton/train and trains repetition rate of 0.1 Hz we have measured the beam profile by a few scanning steps. The experience accumulated in these experiments turned out to be useful for the VWM upgrades (e. g. understanding interactions of protons with wire materials and heat transfer processes) and will be particularly helpful for the KOMAC beam halo measurements in the future high-current operation.

Envelope Hamiltonian for charged-particle dynamics in general linear coupled systems

The MuCool Test Area (MTA) at Fermilab is a facility to develop the technology required for ionization cooling for a future Muon Collider and∕or Neutrino Factory. As part of this research program, feasibility studies of various types of RF cavities in a high magnetic field environment are in progress. As a unique approach, we have tested a RF cavity filled with a high pressure hydrogen gas with a 400 MeV proton beam in an external magnetic field (B = 3 T). Quantitative information about the number of protons passing through this cavity is an essential requirement of the beam test. The MTA is a flammable gas (hydrogen) hazard zone. Due to safety reasons, no active (energized) beam diagnostic instrument can be used. Moreover, when the magnetic field is on, current transformers (toroids) used for beam intensity measurements do not work due to the saturation of the ferrite material of the transformer. Based on these requirements, we have developed a passive beam diagnostic instrumentation using a combination of a Chromox-6 scintillation screen and CCD camera. This paper describes details of the beam profile and position obtained from the CCD image with B = 0 T and B = 3 T, and for high and low intensity proton beams. A comparison is made with beam size obtained from multi-wires detector. Beam transmission efficiency through a collimator with a 4 mm diameter hole is measured by the toroids and CCD image of the scintillation screen. Results show that the transmission efficiency estimated from the CCD image is consistent with the toroid measurement, which enables us to monitor the beam transmission efficiency even in a high magnetic field environment.