Moussa Hamadouche

Alumina-on-alumina total hip arthroplasty: A minimum 18.5-year follow-up study

Background: The purpose of this retrospective study was to report the results, after a minimum of 18.5 years of follow-up, in a consecutive series of total hip arthroplasties performed with an alumina-on-alumina combination. Methods: One hundred and eighteen consecutive total hip arthroplasties were performed in 106 patients between 1979 and 1980. The prostheses combined a 32-mm alumina head and an all-alumina socket. Both components were cemented in eighty-five hips, both components were implanted without cement in twenty-nine, and only the stem was cemented in four. The mean age of the patients at the time of the index arthroplasty was 62.2 years (range, thirty-two to eighty-nine years). Results: At the 18.5 to 20.5-year follow-up evaluation, forty-five patients (fifty-one hips) were alive and had not had a revision, twenty-five patients (twenty-five hips) had undergone revision of one or both components, twenty-seven patients (thirty hips) had died, and nine patients (twelve hips) had been lost to follow-up. The mean Merle d’Aubigné hip score (and standard deviation) was 16.2 ± 1.8 points at the latest follow-up evaluation. The rate of survival at twenty years, with revision for any reason as the end-point, was 85.6% for the cementless cups compared with 61.2% for the cemented cups and 84.9% for the cementless stems compared with 87.3% for the cemented stems. Wear of the prosthetic components was undetectable on plain radiographs. Periprosthetic cystic or scalloped lesions requiring the use of allograft bone during revision were present in three of the twenty-five revised hips. In addition, seven hips had moderate acetabular osteolysis treated with a 4-mm-larger cup. No fracture of the alumina socket or head was recorded. The mean acetabular wear rate in this series was <0.025 mm/yr. Conclusion: With the alumina-on-alumina total hip arthroplasty, minimal wear rates and limited osteolysis can be expected up to twenty years after the operation, provided that sound acetabular component fixation is obtained.

Long-term in vivo bioactivity and degradability of bulk sol-gel bioactive glasses

Melt-derived bioactive glasses have been used with success in various clinical applications for over 10 years. Recently, particles of sol-gel-derived bioactive glasses with an initial high specific surface area have been shown to exhibit excellent osteoconductive properties as well as significant degradability. In this work, we explored the long-term in vivo bioactivity and degradability of bulk sol-gel-derived glasses in a rabbit model. Two sol-gel compositions (58S and 77S Bioglass) were used. Bulk 45S5 Bioglass was used as a control. Both sol-gel-derived glasses demonstrated osteoconductive properties similar to 45S5 Bioglass. In addition, absorbability was observed for both sol-gel-derived glasses starting after 12 weeks of implantation. Total absorption reached 40% after 52 weeks. No degradation could be measured in the case of bulk 45S5 melt-derived Bioglass within 1 year of implantation. The degradation process was highly time dependent, as demonstrated by regression analysis. New bone formation was found to fill in areas that had been resorbed, similar to bone remodeling. This absorbability can be assumed to be at least partially related to an osteoclastic resorption as viable osteoclasts-like cells were found to be in direct contact with the glass surfaces.

Prevention of wear and osteolysis: alumina-on-alumina bearing.

Alumina-on-alumina bearings in total hip replacement have been used for 30 years. Excellent tribologic properties and extra low debris generation could, in theory, provide an answer to osteolysis. A review of the authors’ experience with alumina-on-alumina bearings showed that, except in a few bearings that had been loose for a long time, osteolysis was not a problem. Although the cemented titanium stem and the alumina-on-alumina couple were not a problem, fixation of the socket had to be improved. To improve the socket fixation system and to avoid the use of a cemented titanium stem that may have created problems in the long-term, a new design was introduced in 1997. The current authors present the preliminary results of the first 96 hips with cementless fully-coated hydroxyapatite titanium alloy stems and sockets, 32-mm alumina femoral head, and alumina liner, both held with a Morse taper. Ninety-six consecutive hips in 89 patients (57 males, 32 females) with a median age of 46 years (range, 14–72 years) were analyzed. One socket was revised at 4 months because of poor primary stability in a patient with a severe acetabular fracture. One patient experienced a traumatic fracture of the implanted femur 3 weeks after surgery. The mean followup was 16 months (range, 4–38 months). One patient died from rupture of an aneurysm. Ninety-three hips in 86 patients were assessed regarding the clinical and radiologic ratings. Two patients (two hips) were interviewed by telephone. The Merle d’Aubigné rating system was 18 in 65 hips (59 patients), 17 in 25 hips (25 patients), and 16 in three hips (three patients) mainly related to a previous disability including limp, sciatic palsy, or stiffness. Examination of 93 available radiographs revealed no ostelolysis, no radiolucent lines at the last examination, and no subsidence. The level of excellent results, even in this young population, and lack of osteolysis and wear are encouraging, even if the followup is too short to allow any conclusions to be made.

Wear of alumina-on-alumina total hip arthroplasties at a mean 11-year followup

The surface topography of 11 alumina-onalumina hip arthroplasties retrieved for aseptic loosening at a mean 11-year followup was investigated. Macroscopic wear was assessed using a coordinate measuring machine. Microscopic wear features were evaluated by Talysurf analysis. Scanning electron microscopy was used to look at the alumina microstructure. Components were classified into three groups: (1) low wear with no sign of wear and average arithmetic roughness values below 0.05 μm; (2) stripe wear with a visible oblong worn area on the femoral heads and penetration rates below 10 μm/year; and (3) severe wear with a visible loss of material on both components, showing total roughness values as much as 4 μm and maximum penetrations higher than 150 μm. Alumina quality assessed by grain size measurements and porosity percentages improved progressively from 1977 to 1988. This resulted in a correlated decrease of the microscopic wear magnitude. However, on a macroscopic scale, factors responsible for either a load increase (weight, young age, and male gender) or impairment in the load distribution over the component surfaces (large grain size, nonoptimal initial cup inclination, and cup migration and/or tilting) increased the penetration rates.

Total hip arthroplasty for the treatment of ankylosed hips : a five to twenty-one-year follow-up study.

Background: The purpose of the present retrospective study was to report the long-term results of total hip arthroplasty following a hip fusion. Special attention was paid to the resulting function of both the involved joint and the neighboring joints, as pain in the lower back or knee was the usual indication for conversion. The factors that were likely to influence the functional outcome were analyzed. Methods: Forty-five consecutive total hip arthroplasties were performed in forty-five patients from 1969 through 1993. The mean age of the patients at the time of the operation was 55.8 years (range, twenty-eight to eighty years). Ankylosis of the hip had been spontaneous in twenty patients and postoperative in twenty-five patients. The mean duration of the ankylosis had been thirty-six years (range, three to sixty-five years). The mean duration of follow-up was 8.5 years (range, five to twenty-one years). No patient was lost to follow-up. Results: The mean hip score, according to the scale of Merle d’Aubigné, was 16.5 1.5 points at the latest follow-up evaluation. Hip function was considered to be satisfactory for forty-one (91%) of the forty-five patients. The definitive score for walking ability was not achieved by the one-year evaluation; it improved notably for two to three years and then it remained stable. At the time of the latest follow-up, the mean arc of flexion was 88° (range, 30° to 130°). Forty-three (96%) of the forty-five patients had no pain in the involved joint. The only factor that was predictive of the final functional result with regard to walking ability was the intraoperative status of the gluteal muscles. Most patients had effective pain relief in the neighboring joints. The cumulative survival rate at eight years, with revision as the end point, was 96.7% (95% confidence interval, 90.2% to 100%). Conclusions: The long-term effectiveness of total hip arthroplasty for the treatment of an ankylosed hip was clearly demonstrated in both the involved and the neighboring joints in the present study. However, the preoperative and intraoperative status of the gluteal muscles should be carefully evaluated when this procedure is being considered, as this was the only factor that was predictive of the final walking ability.

Determinants of satisfaction 1 year after total hip arthroplasty: the role of expectations fulfilment

BackgroundBetween 7% and 15% of patients are dissatisfied after total hip arthroplasty (THA). To assess predictors and postoperative determinants of satisfaction and expectation fulfilment one year after (THA).MethodsBefore THA surgery, 132 patients from three tertiary care centres and their surgeons were interviewed to assess their expectations using the Hospital for Special Surgery Total Hip Replacement Expectations Survey (THR survey). One year after surgery, patients (n = 123) were contacted by phone to complete a questionnaire on expectation fulfilment (THR survey), satisfaction, functional outcome (Womac), and health-related quality of life (SF 12). Univariate and multivariate analyses were performed.ResultsPreoperative predictors of satisfaction were a good mental wellbeing (adjusted OR 1.09 [1.02; 1.16], p = 0.01) and optimistic surgeons expectations (1.07 [1.01; 1.14], p = 0.02). The main postoperative determinant of satisfaction was the fulfilment of patient’s expectations (1.08 [1.04; 1.12], p < 0.001). Expectation fulfilment could be predicted before surgery by young age (regression coefficient −0.55 [−0.88; -0.21], p = 0.002), good physical function (−0.96 [−1.82; -0.10], p = 0.03) and good mental wellbeing (0.56 [0.14; 0.99], p = 0.01). Postoperative determinants of expectation fulfilment were functional outcome (−2.10 [−2.79; -1.42], p <0.001) and pain relief (−14.83 [−22.38; -7.29], p < 0.001).ConclusionTo improve patient satisfaction after THA, patients’ expectations and their fulfilment need to be carefully addressed. Patients with low mental wellbeing or physical function should be identified and specifically informed on expected surgical outcome. Surgeons’ expectations are predictive of satisfaction and information should aim to lower discrepancy between surgeons’ and patients’ expectations.

Alumina pairing in total hip replacement

In 1971, Boutin introduced the concept of an alumina-on-alumina bearing in total hip replacement and emphasised polyethylene wear as the major limitation of a metal-on-polyethylene articulation.[1][1],[2][2] This was further confirmed by Willert, Bertram and Buchorn.[3][3] Many pioneers from around

A comparison of the penetration rate of two polyethylene acetabular liners of different levels of cross-linking: A PROSPECTIVE RANDOMISED TRIAL

We carried out a prospective randomised study designed to compare the penetration rate of acetabular polyethylene inserts of identical design but different levels of cross-linking at a minimum of four years follow-up. A total of 102 patients (102 hips) were randomised to receive either highly cross-linked Durasul, or contemporary Sulene polyethylene inserts at total hip replacement. A single blinded observer used the Martell system to assess penetration of the femoral head. At a mean follow-up of 4.9 years (4.2 to 6.1) the mean femoral head penetration rate was 0.025 mm/year (SD 0.128) in the Durasul group compared with 0.106 mm/year (SD 0.109) in the Sulene group (Mann-Whitney test, p = 0.0027). The mean volumetric penetration rate was 29.24 mm(3)/year (SD 44.08) in the Durasul group compared with 53.32 mm(3)/year (SD 48.68) in the Sulene group. The yearly volumetric penetration rate was 55% lower in the Durasul group (Mann-Whitney test, p = 0.0058). Longer term results are needed to investigate whether less osteolysis will occur.

A comparison of patient-specific and conventional instrumentation for total knee arthroplasty

In this study we randomised 140 patients who were due to undergo primary total knee arthroplasty (TKA) to have the procedure performed using either patient-specific cutting guides (PSCG) or conventional instrumentation (CI). The primary outcome measure was the mechanical axis, as measured at three months on a standing long-leg radiograph by the hip-knee-ankle (HKA) angle. This was undertaken by an independent observer who was blinded to the instrumentation. Secondary outcome measures were component positioning, operating time, Knee Society and Oxford knee scores, blood loss and length of hospital stay. A total of 126 patients (67 in the CI group and 59 in the PSCG group) had complete clinical and radiological data. There were 88 females and 52 males with a mean age of 69.3 years (47 to 84) and a mean BMI of 28.6 kg/m(2) (20.2 to 40.8). The mean HKA angle was 178.9° (172.5 to 183.4) in the CI group and 178.2° (172.4 to 183.4) in the PSCG group (p = 0.34). Outliers were identified in 22 of 67 knees (32.8%) in the CI group and 19 of 59 knees (32.2%) in the PSCG group (p = 0.99). There was no significant difference in the clinical results (p = 0.95 and 0.59, respectively). Operating time, blood loss and length of hospital stay were not significantly reduced (p = 0.09, 0.58 and 0.50, respectively) when using PSCG. The use of PSCG in primary TKA did not reduce the proportion of outliers as measured by post-operative coronal alignment.

Hydroxyapatite-coated versus grit-blasted femoral stems: A PROSPECTIVE, RANDOMISED STUDY USING EBRA-FCA

We have carried out a prospective, randomised study designed to compare the long-term stability of the stem of cementless femoral implants with differing surface configurations. A total of 50 hips (46 patients) was randomised into two groups, according to whether the medullary stem had been grit blasted (GB) or coated with hydroxyapatite (HA). Both femoral prostheses were of the same geometrical design. We used Ein Bild Roentgen Analyse femoral component analysis (EBRA-FCA) to assess the stability of the stem. The mean follow-up was for 8.66 years. The mean migration of the stem was 1.26 mm in the HA group compared with 2.57 mm in the GB group (Mann-Whitney U test, p = 0.04). A mixed model ANOVA showed that the development of subsidence was statistically different in the two groups during the first 24 months. After this subsidence increased in both groups with no difference between them. Our results indicate that, with the same design of stem, HA coating enhanced the stability of the femoral stem when compared with GB stems.