Muhammad J. Habib

Understanding the quality of protein loaded PLGA nanoparticles variability by Plackett-Burman design.

The aim of this investigation was to screen and understand the product variability due to important factors affecting the characteristics CyA-PLGA nanoparticles prepared by O/W emulsification-solvent evaporation method. Independent variables studied were cyclosporine A (CyA) (X(1)), PLGA (X(2)), and emulsifier concentration namely SLS (X(3)), stirring rate (X(4)), type of organic solvent employed (chloroform or dichloromethane, X(5)) and organic to aqueous phase ratio (X(6)). The nanoparticles properties considered were encapsulation efficiency (Y(1)), mean particle size (Y(2)), zeta potential (Y(3)), burst effect (Y(4)) and dissolution efficiency (Y(5)). The statistical analysis of the results allowed determining the most influent factors. The nanoparticles were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X-ray powder diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. The factors combination showed variability of entrapment efficiency (Y(1)), mean particle size (Y(2)) and zeta potential (Y(3)) from 10.17% to 93.01%, 41.60 to 372.80 nm and 29.60 to 34.90 mV, respectively. Initially, nanoparticles showed burst effect followed by sustained release during the 7-day in vitro release study period. The dissolution efficiency (Y(5)) varied from 52.67% to 84.11%. The nanoparticles revealed Higuchi release pattern and release occurred by coupling of diffusion and erosion. In conclusion, this study revealed the potential of QbD in understanding the effect of formulation and process variables on the characteristics on CyA-PLGA nanoparticles.

Application of quality by design elements for the development and optimization of an analytical method for protamine sulfate.

The purpose of this study was to develop a robust reverse phase-HPLC method for the separation of hydrolyzed protamine sulfate peptides using a quality by design approach. A Plackett-Burman experimental design was utilized to screen the effects of mobile phase pH, flow rate, column temperature, injection volume and methanol concentration on peak resolution and USP tailing. Multivariate regression and Pareto ranking analyses showed that mobile phase pH, column temperature and injection volume were statistically significant (p<0.05) factors affecting the resolution and tailing of the peaks. A Box-Behnken experimental design with response surface methodology was then utilized to evaluate the main, interaction, and quadratic effects of these three factors on the selected responses. A desirability function applied to the optimized conditions predicted peak resolutions between 1.99 and 3.61 and tailing factor between 1.02 and 1.45 for the four peptide peaks of protamine sulfate with the following chromatographic conditions; an isocratic mobile phase consisting of 100mM monosodium phosphate buffer pH 2.25, 1.8% acetonitrile and 0.3% methanol. The injection volume was 20 μl, with a column temperature of 24 °C and a flow rate of 1.0 ml/min and a total run time of less than 25 min. The optimized chromatographic method was validated according to ICH Q2R1 guidelines and applied to separate and compare the peaks of protamine sulfate from five different sources. Analyses of the peptide peaks of the five protamine sulfate samples showed no significant differences in their compositions. The results clearly showed that quality by design concept could be effectively applied to optimize an HPLC chromatographic method for protein analysis with the least number of experimental runs possible.

Formulation of anastrozole microparticles as biodegradable anticancer drug carriers

The purpose of this study was to develop poly(d,1-lactic-coglycolic acid) (PLGA)-based anastrozole microparticles for treatment of breast cancer. An emulsion/extraction method was used to prepare anastrozole sustained-release PLGA-based biodegradable microspheres. Gas chromatography with mass spectroscopy detection was used for the quantitation of the drug throughout the studies. Microparticles were formulated and characterized in terms of encapsulation efficiency, particle size distribution, surface morphology, and drug release profile. Preparative variables such as concentrations of stabilizer, drug-polymer ratio polymer viscosity, stirring rate, and ratio of internal to external phases were found to be important factors for the preparation of anastrozole-loaded PLGA microparticles. Fourier transform infrared with attenuated total reflectance (FTIR-ATR) analysis and differential scanning calorimetry (DSC) were employed to determine any interactions between drug and polymer. An attempt was made to fit the data to various dissolution kinetics models for multiparticulate systems, including the zero order, first order, square root of time kinetics, and biphasic models. The FTIR-ATR studies revealed no chemical interaction between the drug and the polymer. DSC results indicated that the anastrozole trapped in the microspheres existed in an amorphous or disordered-crystalline status in the polymer matrix. The highest correlation coefficients were obtained for the Higuchi model, suggesting a diffusion mechanism for the drug release. The results demonstrated that anastrozole microparticles with PLGA could be an alternative delivery method for the long-term treatment of breast cancer.

Near-Infrared Investigations of Novel Anti-HIV Tenofovir Liposomes

Near-infrared (NIR) approaches is considered one of the most well-studied process analyzers evolving from the process analytical technology initiatives. The objective of this study was to evaluate NIR spectroscopy and imaging to assess individual components within a novel tenofovir liposomal formulation. By varying stearylamine, as a positive charge imparting agent, five batches were prepared by the thin film method. Each formulation was characterized in terms of drug entrapment efficiency, release characteristics, particle sizing, and zeta potential. Drug excipients compatibility was tested using Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction. The obtained results showed an increase in drug entrapment and a slower drug release by increasing the incorporated percentage of stearylamine. The compatibility testing revealed a significant interaction between the drug and some of the investigated excipients. The developed NIR calibration model was able to assess drug, phospholipid, and stearylamine levels along the batches. The calibration and prediction plots were linear with correlation coefficients of more than 0.9. The root square standard errors of calibration and prediction did not attain 5% of the measured values confirming the accuracy of the model. In contrast, NIR spectral imaging was capable of clearly distinguishing the different batches, both qualitatively and quantitatively. A linear relationship was obtained correlating the actual drug entrapped and the predicted values obtained from the partial least squares images.

Enhanced Dissolution and Oral Bioavailability of Piroxicam Formulations: Modulating Effect of Phospholipids.

Several biologically relevant phospholipids were assessed as potential carriers/additives for rapidly dissolving solid formulations of piroxicam (Biopharmaceutics Classification System Class II drug). On the basis of in vitro dissolution studies, dimyristoylphosphatidylglycerol (DMPG) was ranked as the first potent dissolution rate enhancer for the model drug. Subsequently, the solid dispersions of varying piroxicam/DMPG ratios were prepared and further investigated. Within the concentration range studied (6.4-16.7 wt %), the dissolution rate of piroxicam from the solid dispersions appeared to increase as a function of the carrier weight fraction, whereas the cumulative drug concentration was not significantly affected by piroxicam/DMPG ratio, presumably due to a unique phase behavior of the aqueous dispersions of this carrier phospholipid. Solid state analysis of DMPG-based formulations reveled that they are two-component systems, with a less thermodynamically stable form of piroxicam (Form II) being dispersed within the carrier. Finally, oral bioavailability of piroxicam from the DMPG-based formulations in rats was found to be superior to that of the control, as indicated by the bioavailability parameters, cmax and especially Tmax (53 μg/mL within 2 h vs. 39 μg/mL within 5.5 h, respectively). Hence, DMPG was regarded as the most promising carrier phospholipid for enhancing oral bioavailability of piroxicam and potentially other Class II drugs.

Transdermal delivery of metoprolol I: Comparison between hairless mouse and human cadaver skin and effect of n-decylmethyl sulfoxide

Abstract Metoprolol (MP) is a potent β 1 -selective adrenergic blocking agent with proven antihypertensive activity. However, it undergoes extensive hepatic first-pass metabolism and has a short biological half-life which necessitate frequent dosing to attain adequate therapeutic blood levels. To overcome this problem, the feasibility of systemic delivery of MP via the transdermal route was explored. A monolithic polyacrylate adhesive dispersion type delivery system containing MP free base was fabricated and in vitro skin permeation studies were conducted at 37°C across excised full thickness hairless mouse and dermatomed human cadaver skins. Skin permeation rate across human cadaver skin was found to be lower than that of hairless mouse. Skin permeation profiles across both types of skins showed amembrane permeation controlled Q vs t linear relationship. Skin permeation rate was found to be dependent both on adhesive film thickness and loading dose of the drug in the matrix. Maximum skin permeation rate was obtained from a system having 1.5 mm thickness with a 10% (w/w) loading dose. n -Decylmethyl sulfoxide was found to enhance skin permeation rate of MP through human cadaver skin at a loading dose of 5% (w/w).

Development and application of a validated HPLC method for the analysis of dissolution samples of levothyroxine sodium drug products

A rapid, selective, and sensitive gradient HPLC method was developed for the analysis of dissolution samples of levothyroxine sodium tablets. Current USP methodology for levothyroxine (L-T(4)) was not adequate to resolve co-elutants from a variety of levothyroxine drug product formulations. The USP method for analyzing dissolution samples of the drug product has shown significant intra- and inter-day variability. The sources of method variability include chromatographic interferences introduced by the dissolution media and the formulation excipients. In the present work, chromatographic separation of levothyroxine was achieved on an Agilent 1100 Series HPLC with a Waters Nova-pak column (250 mm × 3.9 mm) using a 0.01 M phosphate buffer (pH 3.0)-methanol (55:45, v/v) in a gradient elution mobile phase at a flow rate of 1.0 mL/min and detection UV wavelength of 225 nm. The injection volume was 800 μL and the column temperature was maintained at 28°C. The method was validated according to USP Category I requirements. The validation characteristics included accuracy, precision, specificity, linearity, and analytical range. The standard curve was found to have a linear relationship (r(2)>0.99) over the analytical range of 0.08-0.8 μg/mL. Accuracy ranged from 90 to 110% for low quality control (QC) standards and 95 to 105% for medium and high QC standards. Precision was <2% at all QC levels. The method was found to be accurate, precise, selective, and linear for L-T(4) over the analytical range. The HPLC method was successfully applied to the analysis of dissolution samples of marketed levothyroxine sodium tablets.

Dissolution profiles of flurbiprofen in phospholipid solid dispersions.

This study is concerned with the development of a solid dispersion formulation of flurbiprofen (FLP) and phospholipid (PL) with improved dissolution characteristics. The FLP powders were blended with PL to produce FLP-PL physical mixtures or made into solid dispersions with PL by the solvent method. The FLP exhibited significantly improved dissolution rates in PL coprecipitate (coppt) compared to the physical mixtures or FLP alone. The dissolution studies suggested that less than a 20:1 ratio of FLP to PL was required to disperse FLP completely in the carrier. The coppt yielded a ninefold greater initial dissolution rate. Also, the total amount dissolved after 60 min was twofold greater at a 10:1 ratio of FLP to L-(-dimyristoyl phosphatidylglycerol (DMPG). Similar results were observed with a ratio as low as 20:1 (FLP:DMPG). Increasing the DMPG content did not increase the rate to any significant extent. Thus, a small PL:FLP ratio improved the dissolution to a significant level. Thus, an FLP:PL dispersion may have the clinical advantages of quick release and excellent bioavailability.

Controlled Release Tacrine Delivery System for the Treatment of Alzheimer's Disease

Alzheimers disease is a neurodegenerative condition that affects approximately 5 million people and is the fourth leading cause of death in America. Tacrine is one of the three drugs approved by the FDA for the treatment of Alzheimers disease. However, the drug has a short biologic half-life of 2-3 hr and gastrointestinal, cholinergic, and hepatic adverse reactions that are associated with high doses of the drug. The aim of our study was to formulate a controlled release delivery system of tacrine that could be used to minimize the side effects associated with the drug. Microparticles of tacrine were formulated using poly(D,L-lactide-co-glycolide) (PLG). PLG and tacrine were dissolved in mixed organic solvents and added to a polyvinyl alcohol solution that was stirred at a constant rate. The organic solvent was evaporated overnight and the formed microparticles were collected by filtration, dried, and sieve-sized. The effects of such formulation variables, as molecular weight of polymer, stir speed during preparation, and drug loading on encapsulation efficiency (EEF), and in vitro release profiles of tacrine were investigated. An increase in the molecular weight of polymer from 8,000 to 59,000 and 155,000 resulted in approximately 10-fold increase in EEF, but the rate of release decreased with increasing molecular weight. Stir speed during preparation had an effect on the EEF but not on the rate of release. Drug loading did not have a significant effect on the EEF but had an effect on the rate of tacrine release. The results suggest that tacrine could be delivered at controlled levels for weeks for the treatment of Alzheimers disease.Alzheimers disease is a neurodegenerative condition that affects ~5 million people and is the fourth leading cause of death in America. Tacrine is one of the three drugs approved by the FDA for the treatment of Alzheimers disease. However, the drug has a short biologic half-life of 2?3 hr and gastrointestinal, cholinergic, and hepatic adverse reactions that are associated with high doses of the drug. The aim of our study was to formulate a controlled release delivery system of tacrine that could be used to minimize the side effects associated with the drug. Microparticles of tacrine were formulated using poly(D,L-lactide-co-glycolide) (PLG). PLG and tacrine were dissolved in mixed organic solvents and added to a polyvinyl alcohol solution that was stirred at a constant rate. The organic solvent was evaporated overnight and the formed microparticles were collected by filtration, dried, and sieve-sized. The effects of such formulation variables, as molecular weight of polymer, stir speed during preparation, and drug loading on encapsulation efficiency (EEF), and in vitro release profiles of tacrine were investigated. An increase in the molecular weight of polymer from 8,000 to 59,000 and 155,000 resulted in ~10-fold increase in EEF, but the rate of release decreased with increasing molecular weight. Stir speed during preparation had an effect on the EEF but not on the rate of release. Drug loading did not have a significant effect on the EEF but had an effect on the rate of tacrine release. The results suggest that tacrine could be delivered at controlled levels for weeks for the treatment of Alzheimers disease.

Development of controlled release formulations of ketoprofen for oral use

AbstractMicroencapsulated forms of ketoprofen were formulated using polymers and polymer combinations and their in-vitro release characteristics were evaluated against pure ketoprofen using Vanderkamp 600 dissolution test apparatus. Suspensions of cellulose acetate phthalate were prepared and various quantities of drug, glycerin, tween 80, span 80, methocel and avicel were added and the resulting solution was passed through a peristaltic pump into a hardening solution. Beads were formed, dried and the release of the drug was studied at various time intervals in a dissolution medium of simulated intestinal pH. The dissolution studies of the ketoprofen demonstrated differences in drug release properties depending on composition and method of preparation. A formulation of Methocel beads with equal proportions of the two surfactants released its drug content over a period of 12 hours in a zero-order fashion. Rapid drug dissolution was seen when the formulations contained Tween 80 as a surfactant. Varying the ...