Murray W. McCutcheon

High quality factor photonic crystal nanobeam cavities

We investigate the design, fabrication, and experimental characterization of high quality factor photonic crystal nanobeam cavities in silicon. Using a five-hole tapered one-dimensional photonic crystal mirror and precise control of the cavity length, we designed cavities with theoretical quality factors as high as 1.4×107. By detecting the cross-polarized resonantly scattered light from a normally incident laser beam, we measure a quality factor of nearly 7.5×105. The effect of cavity size on mode frequency and quality factor was simulated and then verified experimentally.

Design of a silicon nitride photonic crystal nanocavity with a Quality factor of one million for coupling to a diamond nanocrystal

A photonic crystal nanocavity with a Quality (Q) factor of 1.4 x 10(6), a mode volume of 0.78(lambda/n)(3), and an operating wavelength of 637 nm is designed in a silicon nitride (SiN(x)) ridge waveguide with refractive index of 2.0. The effect on the cavity Q factor and mode volume of single diamond nanocrystals of various sizes and locations embedded in the center and on top of the nanocavity is simulated, demonstrating that Q > 1 x 10(6) is achievable for realistic parameters. An analysis of the figures of merit for cavity quantum electrodynamics reveals that strong coupling between an embedded diamond nitrogen-vacancy center and the cavity mode is achievable for a range of cavity dimensions.

Integrated Diamond Networks for Quantum Nanophotonics

We demonstrate an integrated nanophotonic network in diamond, consisting of a ring resonator coupled to an optical waveguide with grating in- and outcouplers. Using a nitrogen-vacancy color center embedded inside the ring resonator as a source of photons, single photon generation and routing at room temperature is observed. Furthermore, we observe a large overall photon extraction efficiency (10%) and high quality factors of ring resonators (3200 for waveguide-coupled system and 12,600 for a bare ring).

Programmable photonic crystal nanobeam cavities

We present dynamically reconfigurable photonic crystal nanobeam cavities, operating at ~1550 nm, that can be continuously and reversibly tuned over a 9.5 nm wavelength range. The devices are formed by two coupled nanobeam cavities, and the tuning is achieved by varying the lateral gap between the nanobeams. An electrostatic force, obtained by applying bias voltages directly to the nanobeams, is used to control the spacing between the nanobeams, which in turn results in tuning of the cavity resonance. The observed tuning trends were confirmed through simulations that modeled the electrostatic actuation as well as the optical resonances in our reconfigurable geometries.

Coupled photonic crystal nanobeam cavities

We describe the design, fabrication, and spectroscopy of coupled, high quality (Q) factor silicon nanobeam photonic crystal cavities. We show that the single nanobeam cavity modes are coupled into even and odd superposition modes, and we simulate the frequency and Q factor as a function of nanobeam spacing, demonstrating that a differential wavelength shift of 70 nm between the two modes is possible while maintaining Q factors greater than 106. For both on substrate and freestanding nanobeams, we experimentally monitor the response of the even mode as the gap is varied, and measure Q factors as high as 2×105.

Ultra-high-Q TE/TM dual-polarized photonic crystal nanocavities

We demonstrate photonic crystal nanobeam cavities that support both TE- and TM-polarized modes, each with a Q factor greater than one million and a mode volume on the order of the cubic wavelength. We show that these orthogonally polarized modes have a tunable frequency separation and a high nonlinear spatial overlap. We expect these cavities to have a variety of applications in resonance-enhanced nonlinear optics.

Resonant scattering and second-harmonic spectroscopy of planar photonic crystal microcavities

The resonant modes of two-dimensional planar photonic crystal microcavities patterned in a free-standing InP slab are probed in a novel fashion using a long working distance microscope objective to obtain cross-polarized resonant scattering and second-harmonic spectra. We show that these techniques can be used to do rapid effective assays of large arrays of microcavities that do not necessarily contain resonant light-emitting layers. The techniques are demonstrated using microcavities comprised of single missing-hole defects in hexagonal photonic crystal hosts formed with elliptically shaped holes. These cavities typically support two orthogonally polarized resonant modes, and the resonant scattering and harmonic spectra are well fitted using a coherent sum of Lorentzian functions. The well-defined coherence between the two resonant features is explained in terms of a microscopic harmonic oscillator model. The relative merits of these techniques are quantitatively compared with the more commonly used cavi...

Fabrication and characterization of high-quality-factor silicon nitride nanobeam cavities

We present the fabrication and characterization of high-quality-factor (Q) Si3N4 photonic crystal nanobeam cavities at visible wavelengths for coupling to nitrogen-vacancy centers in a cavity QED system. Confocal microphotoluminescence analysis of the nanobeam cavities demonstrates quality factors up to Q ~ 55,000, which are limited by the resolution of our grating spectrometer. This is a 1-order-of-magnitude improvement over previous SiNx cavities at this important wavelength range. We also demonstrate coarse tuning of cavity resonances across 600-700 nm by lithographically scaling the size of fabricated devices.

Integrated High-Quality Factor Optical Resonators in Diamond

The realization of an integrated diamond photonic platform, based on a thin single crystal diamond film on top of a silicon dioxide/silicon substrate, is reported. Using this approach, we demonstrate high-quality factor single crystal diamond race-track resonators, operating at near-infrared wavelengths (1550 nm). The devices are integrated with low-loss diamond waveguides terminated with polymer pads (spot size converters) to facilitate in- (out-) coupling of light from (to) an optical fiber. Optical characterization of these resonators reveal quality factors as high as ~250,000 and overall insertion losses as low as 1 dB/facet. Scattering induced mode splitting as well as signatures of nonlinear effects such as optical bistability are observed at an input pump power of ~100 mW in the waveguides.

Stretchable Photonic Crystal Cavity with Wide Frequency Tunability

We report a new approach for realizing a flexible photonic crystal (PC) cavity that enables wide-range tuning of its resonance frequency. Our PC cavity consists of a regular array of silicon nanowires embedded in a polydimethylsiloxane (PDMS) matrix and exhibits a cavity resonance in the telecommunication band that can be reversibly tuned over 60 nm via mechanical stretching-a record for two-dimensional (2D) PC structures. These mechanically reconfigurable devices could find potential applications in integrated photonics, sensing in biological systems, and smart materials.