Mustafa Ramazanoglu

Isolation and characterization of stem cells derived from human third molar tooth germs of young adults: implications in neo-vascularization, osteo-, adipo- and neurogenesis

A number of studies have reported in the last decade that human tooth germs contain multipotent cells that give rise to dental and peri-odontal structures. The dental pulp, third molars in particular, have been shown to be a significant stem cell source. In this study, we isolated and characterized human tooth germ stem cells (hTGSCs) from third molars and assessed the expression of developmentally important transcription factors, such as oct4, sox2, klf4, nanog and c-myc, to determine their pluri-potency. Flow-cytometry analysis revealed that hTGSCs were positive for CD73, CD90, CD105 and CD166, but negative for CD34, CD45 and CD133, suggesting that these cells are mesenchymal-like stem cells. Under specific culture conditions, hTGSCs differentiated into osteogenic, adipogenic and neurogenic cells, as well as formed tube-like structures in Matrigel assay. hTGSCs showed significant levels of expression of sox2 and c-myc messenger RNA (mRNA), and a very high level of expression of klf4 mRNA when compared with human embryonic stem cells. This study reports for the first time that hTGSCs express developmentally important transcription factors that could render hTGSCs an attractive candidate for future somatic cell re-programming studies to differentiate germs into various tissue types, such as neurons and vascular structures. In addition, these multipotential hTGSCs could be important stem cell sources for autologous transplantation.

Comparison and optimisation of transfection of human dental follicle cells, a novel source of stem cells, with different chemical methods and electro-poration.

Introduction Human dental follicle cells (HDFCs) derived from human impacted third molars (wisdom teeth) have been shown to be a significant source of adult stem cells. Generation of mesenchymal stem cell-like cells from dental follicles causes minimal surgical stress. In vitro and in vivo reports showed that HDFCs can be utilized in gene and cell therapy applications which make them an attractive alternative source for different gene-cell therapy applications. However, there are currently no systematic comparative studies on transfection potential of HDFC cells using different chemical and electro-poration techniques. Methods Stem cells from impacted third tooth molars were isolated, and analyzed for expression of surface markers. Transfection efficiencies of four commercially available transfection reagents (Transfast, Escort V, Superfect and FuGene HD) and electro-poration on isolated stem cells were compared. Results Isolated HDFCs were stained positive for CD105, CD90, CD73, CD166, and negative for CD34, CD45, and CD133. Among the chemical transfection reagents used in this study, FuGene HD was the most efficient in transfecting HDFCs, even in the presence of 10% serum. Conclusion Electro-poration of HDFCs yield relatively high transfection rates and cell viability when compared to chemical transfection techniques. Our observations might be useful for developing gene and cell therapy applications using dental follicle stem cells.

Human Tooth Germ Stem Cells Preserve Neuro-Protective Effects after Long-Term Cryo-Preservation

The use of mesenchymal stem cells (MSCs) has been shown to be promising in chronic disorders such as diabetes, Alzheimers dementia, Parkinsons disease, spinal cord injury and brain ischemia. Recent studies revealed that human tooth germs (hTG) contain MSCs which can be easily isolated, expanded and cryo-preserved. In this report, we isolated human tooth germ stem cells (hTGSCs) with MSC characteristics from third molar tooth germs, cryo-preserved them at -80( degrees )C for 6 months, and evaluated for their surface antigens, expression of pluri-potency associated genes, differentiation capacity, karyotype, and proliferation rate. These characteristics were compared to their non-frozen counterparts. In addition, neuro-protective effects of cryo-preserved cells on neuro-blastoma SH-SY5Y cells were also assessed after exposure to stress conditions induced by hydrogen-peroxide (oxidative stress) and paclitaxel (microtubule stabilizing mitotic inhibitor). After long term cryo-preservation hTGSCs expressed surface antigens CD29, CD73, CD90, CD105, and CD166, but not CD34, CD45 or CD133, which was typical for non-frozen hTGSCs. Cryo-preserved hTGSCs were able to differentiate into osteo-, adipo- and neuro-genic cells. They also showed normal karyotype after high number of population doublings and unchanged proliferation rate. On the other hand, cryo-preserved cells demonstrated a tendency for lower level of pluri-potency associated gene expression (nanog, oct4, sox2, klf4, c-myc) than non-frozen hTGSCs. hTGSCs conditioned media increased survival of SH-SY5Y cells exposed to oxidative stress or paclitaxel. These findings confirm that hTGSCs preserve their major characteristics and exert neuro-protection after long-term cryo-preservation, suggesting that hTGSCs, harvested from young individuals and stored for possible use later as they grow old, might be employed in cellular therapy of age-related degenerative disorders.

The effect of combined delivery of recombinant human bone morphogenetic protein-2 and recombinant human vascular endothelial growth factor 165 from biomimetic calcium-phosphate-coated implants on osseointegration.

OBJECTIVES The delivery of growth factors for enhanced osseointegration depends on the effectiveness of the carrier systems at the bone-implant interface. This study evaluated the effect of solo and dual delivery of recombinant human bone morphogenetic protein-2 (rhBMP-2) and recombinant human vascular endothelial growth factor (rhVEGF(165) ) from biomimetically octacalcium phosphate-coated implants on osseointegration. MATERIALS AND METHODS Biomimetic implants, bearing either a single growth factor (BMP or VEGF) or their combination (BMP+VEGF), were established, and compared with acid-etched (AE, control) and biomimetic implants without growth factor (CAP). Implants were placed into frontal skulls of nine domestic pigs. The quality of osseointegration was evaluated using microradiographic and histomorphometric analysis of bone formation inside four defined bone chambers of the experimental implant at 1, 2 and 4 weeks. RESULTS Biomimetic implants, either with or without growth factor, showed enhanced bone volume density (BVD) values after 2 and 4 weeks. This enhancement was significant for the BMP and BMP+VEGF group compared with the control AE group after 2 weeks (P<0.05). All biomimetic calcium-phosphate (Ca-P) coatings exhibited significantly enhanced bone-implant contact (BIC) rates compared with the uncoated control surface after 2 weeks (P<0.05). However, the combined delivery of BMP-2 and VEGF did not significantly enhance BIC at the final observation period. CONCLUSION It was concluded that the combined delivery of BMP-2 and VEGF enhances BVD around implants, but not BIC. Therefore, it may be assumed that changes in the surface characteristics should be considered when designing growth factor-delivering surfaces.

Role of STRO-1 sorting of porcine dental germ stem cells in dental stem cell-mediated bone tissue engineering

Abstract Stem cells of dental origin emerged as a new source for the regeneration of tissues with advantages mainly including non-invasive collection procedures and lack of ethical contraversies with their harvest or use. In this study, porcine TGSCs (pTGSCs) were isolated from mandibular third molar tooth germs of 6-month-old domestic pigs. This is the first study that reports the isolation and characterization of TGSCs from porcine third molars and their differentiation depending on STRO-1 expression. PTGSCs were sorted according to their STRO-1 expression as STRO-1(+) and STRO-1(−). Sorted and unsorted heterogenous cells (US) were characterized by their osteogenic, chondrogenic and adipogenic differentiation capabilities. STRO-1(+) cells exhibited a higher proliferation rate owing to their clonogenic properties. All three groups of cells were found differentiated into osteogenic lineage as shown by ALP activity, calcium deposition assay, detection of osteogenic mRNAs and, proteins and mineralization staining. According to differentiation analysis, STRO-1(+) cells did not show a better performance for osteogenesis compared to STRO-1(−) and US cells. This might indicate that STRO-1(+) cells might require a heterogeneous population of cells including STRO-1(−) in their niche to perform their proposed role in osteogenesis.

Cartilage tissue engineering on macroporous scaffolds using human tooth germ stem cells.

The main objective was to study cartilage regeneration through differentiation of human tooth germ stem cells (HTGSCs) into chondrocytes on different three‐dimensional (3D) scaffolds (PCL, PLLA and PCL–PLLA). Scaffold topographies were studied by scanning electron microscopy and it was found that the scaffolds had interconnected macroporous structures. HTGSCs were isolated from impacted third molar tooth germs of young adult patients and grown for 3 weeks on the scaffolds in chondrogenic differentiation medium. Cell proliferation on the scaffolds was determined by MTS assay and it was observed that all scaffolds supported cell proliferation. Immunostaining was carried out for morphological and differentiation analyses. Immunohistochemical analyses revealed that the cells attached onto the scaffolds and deposited cartilage‐specific extracellular matrix (ECM). Real‐time PCR was performed to determine the expression levels of cartilage‐specific genes. After 21 days of incubation in cartilage differentiation medium, expression of collagen type II increased only in the cells seeded onto PCL–PLLA blend scaffolds. Similarly, aggrecan expression was the highest on PCL–PLLA scaffolds after 3 weeks. These results suggest that all the scaffolds, and especially PCL–PLLA, were suitable for chondrogenic differentiation of HTGSCs. Copyright

Bone Formation from Porcine Dental Germ Stem Cells on Surface Modified Polybutylene Succinate Scaffolds

Designing and providing a scaffold are very important for the cells in tissue engineering. Polybutylene succinate (PBS) has high potential as a scaffold for bone regeneration due to its capacity in cell proliferation and differentiation. Also, stem cells from 3rd molar tooth germs were favoured in this study due to their developmentally and replicatively immature nature. In this study, porcine dental germ stem cells (pDGSCs) seeded PBS scaffolds were used to investigate the effects of surface modification with fibronectin or laminin on these scaffolds to improve cell attachment, proliferation, and osteogenic differentiation for tissue engineering applications. The osteogenic potentials of pDGSCs on these modified and unmodified foams were examined to heal bone defects and the effects of fibronectin or laminin modified PBS scaffolds on pDGSC differentiation into bone were compared for the first time. For this study, MTS assay was used to assess the cytotoxic effects of modified and unmodified surfaces. For the characterization of pDGSCs, flow cytometry analysis was carried out. Besides, alkaline phosphatase (ALP) assay, von Kossa staining, real-time PCR, CM-Dil, and immunostaining were applied to analyze osteogenic potentials of pDGSCs. The results of these studies demonstrated that pDGSCs were differentiated into osteogenic cells on fibronectin modified PBS foams better than those on unmodified and laminin modified PBS foams.

Potential Use of Dental Stem Cells for Craniofacial Tissue Regeneration

Mesenchymal stem cells such as bone marrow stromal cells and Adipose-derived stem cells are widely being used for clinical applications in regenerative medicine. Dental stem cell sources such as dental pulp stem cells, stem cells from human exfoliated deciduous teeth, periodontal ligament stem cells, stem cells from apical papilla, dental follicle progenitor cells, and tooth germ stem cells have also been started to be used for the same purposes. Since most dental-derived stem cells are of cranial neural crest origin, their use in the engineering of craniofacial structures holds promise in the near future. This chapter will discuss the potential applications of adult stem cells in craniofacial tissue engineering. Current knowledge about adult stem cells of dental and non-dental origin will be reviewed with respect to their regenerative capabilities and therapeutic potentials

Influence of STRO-1 selection on osteogenic potential of human tooth germ derived mesenchymal stem cells

Mesenchymal stem cells derived from the human tooth germ (hTGSCs) are a heterogeneous cell population that can differentiate into osteogenic, neurogenic, and adipogenic lineages. The aim of this study was to compare the osteogenic differentiation capacity of STRO-1 positive (STRO-1+) hTGSCs and unsorted heterogeneous hTGSCs and to establish if STRO-1+ cells are more committed to osteogenic differentiation. HTGSCs were isolated from impacted third molar tooth germ tissues of adolescents, and a subpopulation of STRO-1+ hTGSCs was obtained by fluorescence-activated cell sorting. STRO-1+, STRO-1 negative (STRO-1-), and unsorted cells were cultured in osteogenic and standard culture media to compare their capacity to differentiate towards osteoblastic lineage. Cells were tested for proliferation rates, alkaline phosphatase activity, and amounts of accumulated calcium. Gene expression levels of the RUNX2, osteocalcin, and osteonectin genes were analyzed with real time PCR. Mineralization and osteogenic protein expression were examined by using von Kossa staining and confocal microscopy. Our results indicated that osteogenically induced cell populations showed greater mineralization capacity than non-induced cells. However, expression levels of early and late osteogenic markers were not significantly different between STRO-1+ and unsorted cells. In conclusion, the selection by STRO-1 expression does not yield cells with osteogenic capacity higher than that of the heterogeneous hTGSC population. Cell sorting using osteogenic markers other than STRO-1 might be beneficial in obtaining a more sensitive osteogenic sub-population from unsorted heterogenous hTGSCs.

Mesenchymal stem cell differentiation by nano-engineered Si columns

We successfully engineered Si nano-columns with different cross-sectional geometries by e-beam evaporation with an angle between source and substrate. The Si nano-columns were grown as pillars with square, triangle and linear cross sections in in-plane. Mesenchymal stem cells (MSCs) isolated from the bone marrow stroma of young adult rats were cultured on these different Si nanosurfaces. We found that the behaviour of MSCs highly depended on the geometry of nano-topography so that mesenchymal stem cells were differentiated and induced CaP precipitation on square-cross-sectional Si nano-columns without growth factor in the culture medium.