Myungkwan Song

Charge-transfer-based Gas Sensing Using Atomic-layer MoS2

Two-dimensional (2D) molybdenum disulphide (MoS2) atomic layers have a strong potential to be used as 2D electronic sensor components. However, intrinsic synthesis challenges have made this task difficult. In addition, the detection mechanisms for gas molecules are not fully understood. Here, we report a high-performance gas sensor constructed using atomic-layered MoS2 synthesised by chemical vapour deposition (CVD). A highly sensitive and selective gas sensor based on the CVD-synthesised MoS2 was developed. In situ photoluminescence characterisation revealed the charge transfer mechanism between the gas molecules and MoS2, which was validated by theoretical calculations. First-principles density functional theory calculations indicated that NO2 and NH3 molecules have negative adsorption energies (i.e., the adsorption processes are exothermic). Thus, NO2 and NH3 molecules are likely to adsorb onto the surface of the MoS2. The in situ PL characterisation of the changes in the peaks corresponding to charged trions and neutral excitons via gas adsorption processes was used to elucidate the mechanisms of charge transfer between the MoS2 and the gas molecules.

Silver nanowire embedded in P3HT: PCBM for high efficiency hybrid photovoltaic device applications

A systematic approach has been followed in the development of a high-efficiency hybrid photovoltaic device that has a combination of poly(3-hexylthiophene) (P3HT), [6,6]-phenyl C61-butyric acid methyl ester (PCBM), and silver nanowires (Ag NWs) in the active layer using the bulk heterojunction concept. The active layer is modified by utilizing a binary solvent system for blending. In addition, the solvent evaporation process after spin-coating is changed and an Ag NWs is incorporated to improve the performance of the hybrid photovoltaic device. Hybrid photovoltaic devices were fabricated by using a 1:0.7 weight ratio of P3HT to PCBM in a 1:1 weight ratio of o-dichlorobenzene and chloroform solvent mixture, in the presence and absence of 20 wt % of Ag NWs. We also compared the photovoltaic performance of Ag NWs embedded in P3HT:PCBM to that of silver nanoparticles (Ag NPs). Atomic force microscopy, scanning electron microscopy, transmittance electron microscopy, UV-visible absorption, incident photon-to-current conversion efficiency, and time-of-flight measurements are performed in order to characterize the hybrid photovoltaic devices. The optimal hybrid photovoltaic device composed of Ag NWs generated in this effort exhibits a power conversion efficiency of 3.91%, measured by using an AM 1.5G solar simulator at 100 mW/cm(2) light illumination intensity.

Ultrasmooth, extremely deformable and shape recoverable Ag nanowire embedded transparent electrode.

Transparent electrodes have been widely used in electronic devices such as solar cells, displays, and touch screens. Highly flexible transparent electrodes are especially desired for the development of next generation flexible electronic devices. Although indium tin oxide (ITO) is the most commonly used material for the fabrication of transparent electrodes, its brittleness and growing cost limit its utility for flexible electronic devices. Therefore, the need for new transparent conductive materials with superior mechanical properties is clear and urgent. Ag nanowire (AgNW) has been attracting increasing attention because of its effective combination of electrical and optical properties. However, it still suffers from several drawbacks, including large surface roughness, instability against oxidation and moisture, and poor adhesion to substrates. These issues need to be addressed before wide spread use of metallic NW as transparent electrodes can be realized. In this study, we demonstrated the fabrication of a flexible transparent electrode with superior mechanical, electrical and optical properties by embedding a AgNW film into a transparent polymer matrix. This technique can produce electrodes with an ultrasmooth and extremely deformable transparent electrode that have sheet resistance and transmittance comparable to those of an ITO electrode.

Highly Efficient Organic Hole Transporting Materials for Perovskite and Organic Solar Cells with Long‐Term Stability

Small molecules based on N-atom-linked phenylcarbazole-fluorene as the main scaffold, end-capped with spirobifluorene derivatives, are developed as organic hole-transporting materials for highly efficient perovskite solar cells (PSCs) and bulk heterojunction (BHJ) inverted organic solar cells (IOSCs). The CzPAF-SBF-based devices show remarkable device performance with excellent long-term stability in PSCs and BHJ IOSCs with a maximum PCE of 17.21% and 7.93%, respectively.

Graphene-based gas sensor: metal decoration effect and application to a flexible device

Roles of metal nanoparticles (NPs) on graphene-based devices were investigated in terms of gas-sensing characteristics of NO2 and NH3, and flexible gas sensing was also realized for future applications. The synergistic combination of metal NPs and graphene modulates the electronic properties of graphene, leading to enhancement of selectivity and sensitivity in gas-sensing characteristics. Introduction of palladium (Pd) NPs on the graphene accumulates hole carriers of graphene, resulting in the gas sensor being sensitized by NH3 gas molecular adsorption. In contrast, aluminum (Al) NPs deplete hole carriers, which dramatically improves NO2 sensitivity. Furthermore, the sensitivity of flexible graphene-based gas sensors was also enhanced via the same approach, even after 104 bending cycles and was maintained after 3 months.

High Efficiency Inorganic/Organic Hybrid Tandem Solar Cells

Hybrid tandem solar cells comprising an inorganic bottom cell and an organic top cell have been designed and fabricated. The interlayer combination and thickness matching were optimized in order to increase the overall photovoltaic conversion efficiency. A maximum power conversion efficiency of 5.72% was achieved along with a V(oc) of 1.42 V, reaching as high as 92% of the sum of the subcell V(oc) values.

Highly flexible and transparent conducting silver nanowire/ZnO composite film for organic solar cells

High efficiency and flexible inverted organic solar cells have been fabricated using solution-processed silver nanowire/zinc oxide composite transparent electrodes. The transparent electrodes showed a low sheet resistance of ∼13 Ω·sq−1 and high transmittance of ∼93% as well as superior mechanical flexibility. Power conversion efficiencies of ∼7.57% and ∼7.21% were achieved for devices fabricated on glass and plastic substrate, respectively. Moreover, the flexible devices did not show any degradation in their performance even after being folded with a radius of ∼480 μm.

Stable ultrathin partially oxidized copper film electrode for highly efficient flexible solar cells

Advances in flexible optoelectronic devices have led to an increasing need for developing highly efficient, low-cost, flexible transparent conducting electrodes. Copper-based electrodes have been unattainable due to the relatively low optical transmission and poor oxidation resistance of copper. Here, we report the synthesis of a completely continuous, smooth copper ultra-thin film via limited copper oxidation with a trace amount of oxygen. The weakly oxidized copper thin film sandwiched between zinc oxide films exhibits good optoelectrical performance (an average transmittance of 83% over the visible spectral range of 400–800 nm and a sheet resistance of 9 Ω sq−1) and strong oxidation resistance. These values surpass those previously reported for copper-based electrodes; further, the record power conversion efficiency of 7.5% makes it clear that the use of an oxidized copper-based transparent electrode on a polymer substrate can provide an effective solution for the fabrication of flexible organic solar cells.

Stable semi-transparent CH3NH3PbI3 planar sandwich solar cells

Semi-transparent CH3NH3PbI3 (MAPbI3) planar sandwich solar cells could be fabricated by simply laminating an FTO (F doped tin oxide)/TiO2/MAPbI3/wet hole transporting material (HTM) with additives and PEDOT:PSS (poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid))/indium tin oxide (ITO). The best FTO/TiO2/MAPbI3/P3HT with additives/PEDOT:PSS/ITO planar sandwich structured solar cells exhibited a 12.8% (deviation: 11.7% ± 0.74%) average power conversion efficiency (ηavg) but poor visible transmittance due to strong absorption by P3HT. Meanwhile, the semi-transparent FTO/TiO2/MAPbI3/PTAA with additives/PEDOT:PSS/ITO planar sandwich solar cells exhibited a 15.8% (deviation: 14.45% ± 0.76%) ηavg without significant J–V hysteresis with respect to the forward and reverse scan directions. The average visible transmittance (AVT) was controlled from 17.3% to 6.3% and the corresponding ηavg changed from 12.55% to 15.8%. The unsealed sandwich planar perovskite solar cells exhibited great air and humidity stability over 20 days due to the self-passivated device architecture of the sandwich type device.

High-Performance Long-Term-Stable Dopant-Free Perovskite Solar Cells and Additive-Free Organic Solar Cells by Employing Newly Designed Multirole π-Conjugated Polymers

Perovskite solar cells (PSCs) and organic solar cells (OSCs) are promising renewable light-harvesting technologies with high performance, but the utilization of hazardous dopants and high boiling additives is harmful to all forms of life and the environment. Herein, new multirole π-conjugated polymers (P1-P3) are developed via a rational design approach through theoretical hindsight, further successfully subjecting them into dopant-free PSCs as hole-transporting materials and additive-free OSCs as photoactive donors, respectively. Especially, P3-based PSCs and OSCs not only show high power conversion efficiencies of 17.28% and 8.26%, but also display an excellent ambient stability up to 30 d (for PSCs only), owing to their inherent superior optoelectronic properties in their pristine form. Overall, the rational approach promises to support the development of environmentally and economically sustainable PSCs and OSCs.